Restriction of meat,fish, and poultry in omnivores improves mood: A pilot randomized controlled trial

Background  

Omnivorous diets are high in arachidonic acid (AA) compared to vegetarian diets. Research shows that high intakes of AA promote changes in brain that can disturb mood. Omnivores who eat fish regularly increase their intakes of eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), fats that oppose the negative effects of AA in vivo. In a recent cross-sectional study, omnivores reported significantly worse mood than vegetarians despite higher intakes of EPA and DHA. This study investigated the impact of restricting meat, fish, and poultry on mood.     

Collaborative analytics-supported reflective Assessment for Scaffolding Pre-service Teachers’ collaborative Inquiry and Knowledge Building

International Journal of Computer-Supported Collaborative Learning - Helping pre-service teachers (PSTs) develop competencies in collaborative inquiry and knowledge building is crucial, but this...     

Carbon dioxide absorption by ammonia intensified with membrane contactors

Membrane gas absorption technology is a promising alternative for CO₂ removal from post-combustion coal-fired flue gases. This study examines an alternative which consists in absorbing carbon dioxide by ammonia aqueous solution in a membrane contactor to improve the capture processes and to intensify the gas–liquid transfer. Absorption measurements through a membrane contactor have been made. The influence of the material nature constituting the membrane and operating parameters on the capture efficiency has been studied. The potentialities of dense skin membrane contactors are discussed with regard to both increased CO₂ mass transfer performances and mitigation of ammonia volatilization. The results have shown that it is possible to capture CO₂ from ammonia through a membrane with capture efficiency greater than 90 %. The membrane limits ammonia losses but does not eliminate it. The experimental results are used to calculate an intensification factor of 5, which represents the comparison between the membrane overall absorption rate to that of the column.     

An automated software reliability prediction system for safety critical software

Software reliability is one of the most important software quality indicators. It is concerned with the probability that the software can execute without any unintended behavior in a given environment. In previous research we developed the Reliability Prediction System (RePS) methodology to predict the reliability of safety critical software such as those used in the nuclear industry. A RePS methodology relates the software engineering measures to software reliability using various models, and it was found that RePS’s using Extended Finite State Machine (EFSM) models and fault data collected through various software engineering measures possess the most satisfying prediction capability. In this research the EFSM-based RePS methodology is improved and implemented into a tool called Automated Reliability Prediction System (ARPS). The features of the ARPS tool are introduced with a simple case study. An experiment using human subjects was also conducted to evaluate the usability of the tool, and the results demonstrate that the ARPS tool can indeed help the analyst apply the EFSM-based RePS methodology with less number of errors and lower error criticality.     

The preparation of α‐bis and α,ω‐tetrakis aromatic oxazolyl‐ and carboxyl‐functionalized polymers using 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene in atom transfer radical polymerization reactions

The preparation of new compounds, 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethanol and a new symmetrically disubstituted 1,1‐diphenylethylene derivative, 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene, is described. 1,1‐Bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene was utilized as a dioxazolyl initiator precursor for the polymerization of styrene by atom transfer radical polymerization (ATRP) methods to produce α‐bis(oxazolyl) polystyrene. The kinetic study of the polymerization process indicated that the free radical polymerization reaction for the preparation of α‐bis(oxazolyl) polystyrene follows first‐order rate kinetics with respect to monomer consumption. α,ω‐Tetrakis(oxazolyl) polystyrene was prepared by a new, in situ, controlled/living, post‐ATRP chain‐end‐functionalization reaction which involves the direct addition of 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene to the ω‐terminus of the α‐bis(oxazolyl) polystyrene derivative, without the isolation and purification of the polymeric precursor. α‐Bis(carboxyl) and α,ω‐tetrakis(carboxyl) polystyrene derivatives were obtained by the quantitative chemical transformation of the oxazoline groups of the respective aromatic oxazolyl chain‐end‐functionalized polystyrene derivatives to the aromatic carboxyl groups. The organic precursor compounds, the dioxazolyl‐functionalized 1,1‐diphenylethylene derivative and the functionalized polymers were characterized using ¹H NMR and ¹³C NMR spectrometry and Fourier transform infrared spectroscopy, size‐exclusion and thin‐layer chromatography and non‐aqueous titration measurements. © 2014 Society of Chemical Industry     

Effects of recent energy system changes on CO<Subscript>2</Subscript> projections for the United States

Recent projections of future US carbon dioxide (CO₂) emissions are considerably lower than projections made just a decade ago. A myriad of factors have contributed to lower forecasts, including reductions in end-use energy service demands, improvements in energy efficiency, and technological innovations. Policies that have encouraged these changes include renewable portfolio standards, corporate vehicle efficiency standards, smart growth initiatives, revisions to building codes, and air and climate regulations. Understanding the effects of these and other factors can be advantageous as society evaluates opportunities for achieving additional CO₂ reductions. Energy system models provide a means to develop such insights. In this analysis, the MARKet ALlocation (MARKAL) model was applied to estimate the relative effects of various energy system changes that have happened since the year 2005 on CO₂ projections for the year 2025. The results indicate that transformations in the transportation and buildings sectors have played major roles in lowering projections. Particularly influential changes include improved vehicle efficiencies, reductions in projected travel demand, reductions in miscellaneous commercial electricity loads, and higher efficiency lighting. Electric sector changes have also contributed significantly to the lowered forecasts, driven by demand reductions, renewable portfolio standards, and air quality regulations.     

Addition of carbon black NIR absorber to galvanised steel primer systems: Influence on NIR cure of polyester melamine topcoats and corrosion protection characteristics

Near infrared (NIR) is becoming a popular option for rapid cure of coatings in the coil coating industry particularly where fast line speeds are required. The technology has the potential to reduce the cure time of a 20 μm polyester coating on a galvanised steel substrate from around 30 s via conventional heating methods down to <10 s under the lamps. Previous work suggested that the ideal situation in this case is to have a topcoat which is slightly transparent to NIR and an absorbing substrate to heat the coating from the substrate outwards in a two stage process which separates solvent removal from cross linking and film formation. This can be taken further by tinting the primer layer with a pigment that absorbs in the NIR region. In this study spectroscopy was used to show that a coated steel system could appear white in the visible region because of the reflectance of TiO₂ but the NIR absorption could be altered by adding absorbing pigments such as carbon black. Lamp settings could be reduced by 20% to achieve equivalent cure with tinted primer systems. The potential degradation in corrosion protection afforded by carbon-black containing pigments at various loadings was assessed for model organic coatings applied to galvanised steel specimens. In situ scanning Kelvin probe studies showed that rates of corrosion-driven coating delamination by cathodic disbondment remained unchanged by pigment loadings of up to 3.5 wt%.     

Physiologic Insulin Resensitization as a Treatment Modality for Insulin Resistance Pathophysiology

Prevalence of type 2 diabetes increased from 2.5% of the US population in 1990 to 10.5% in 2018. This creates a major public health problem, due to increases in long-term complications of diabetes, including neuropathy, retinopathy, nephropathy, skin ulcers, amputations, and atherosclerotic cardiovascular disease. In this review, we evaluated the scientific basis that supports the use of physiologic insulin resensitization. Insulin resistance is the primary cause of type 2 diabetes. Insulin resistance leads to increasing insulin secretion, leading to beta-cell exhaustion or burnout. This triggers a cascade leading to islet cell destruction and the long-term complications of type 2 diabetes. Concurrent with insulin resistance, the regular bursts of insulin from the pancreas become irregular. This has been treated by the precise administration of insulin more physiologically. There is consistent evidence that this treatment modality can reverse the diabetes-associated complications of neuropathy, diabetic ulcers, nephropathy, and retinopathy, and that it lowers HbA1c. In conclusion, physiologic insulin resensitization has a persuasive scientific basis, significant treatment potential, and likely cost benefits.