Sorption of propylene and propane in polyurethane membranes containing silver nanoparticles

The preparation of a facilitated transport membrane of polyurethane (PU) containing silver nanoparticles is reported. The propylene and propane sorption was investigated aiming at the selective separation from C3s mixtures. The silver particles were photogenerated in situ into the polyurethane matrix using UV light radiation and silver triflate (AgCF₃SO₃) as precursor. The morphological properties of these membranes (PUAg) reveled great dispersion of silver particles, which size was smaller than 110 nm. The propylene solubility in PUAg resulted more than four times superior to the one for the pure PU membrane, revealing the high affinity between silver and propylene. Flory–Huggins theory was more accurate to describe the propylene sorption behavior in PUAg than Henry's model. The ideal solubility selectivity of PUAg membrane resulted 24.4, indicating that there is a good potential for an industrial application aiming at the separation of propylene/propane. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42916.     

Advanced treatment of phenol by H2O2/UV/activated carbon coupling: Influence of homogeneous and heterogeneous phase

In this work, a heterogeneous catalytic wet peroxide process combining activated carbon (AC) and hydrogen peroxide (H₂O₂)/ultraviolet radiation was applied for the aqueous‐phase removal of phenol. The influence of the pH and peroxide concentration were determined according to a factorial plan. The kinetic contribution of radical mechanisms () was estimated using a radical scavenger (tert‐butyl alcohol). The degradation kinetics was modelled by a global pseudo‐first‐order kinetic model based on the sum of the effects during the treatment process. The results showed that these two variables significantly affected the percentage removal. The peroxide concentration exerted a positive effect (i.e., as the H₂O₂ concentration increased, the percentage removal also increased). Additionally, as the pH value increased, the degradation accelerated, and the kinetic constant (k_homogeneous) increased from 0.00938 min^?1 to 0.02772 min^?1. The results obtained in the presence of AC demonstrated the ability of AC to ameliorate the degradation of phenol; for example, was 45.69 % to 41.35 %.

     

Color stability of denture shade tabs is affected by exposure to daylight and decontamination protocols

The purpose of this study was to investigate the effect of light exposure and decontamination protocols on the color stability of denture shade guide tabs. Fifty tabs for shades 62, 66, and 69 (Biotone IPN, Dentsply Sirona) were submitted to baseline L*a*b* measurements (EasyShade, Vita), separated into 5 experimental groups (n = 10), and subjected to one of the following conditions: G1–distilled water (DW‐H₂O)–control; G2 ?70% alcohol; G3–sodium hypochlorite 1% (NaClO); G4–no light exposure; G5–natural light exposure for 6 months. The experimental conditions were designed to simulate 6 months of clinical use. After the test period, final color measurements were recorded. The mean tristimulus coordinate difference (ΔL*,Δa*,Δb*) and total color difference values () were analyzed using 2‐way ANOVA and the Tukey test, α = .05. G2 (alcohol) produced less (P < .05) color change in shade 69 than G3 (NaClO). G5 (light exposure) affected the color stability for all shades, producing a statistical difference (P < .05) from G4 (no light exposure). It was concluded that natural light changes the color stability of the shade guides and that decontamination with 70% alcohol had the least impact on the color stability of the shade guide tabs.     

Gripper Design for Radio Base Station Autonomous Maintenance System

For an autonomous system to perform maintenance tasks in a networking device or a radio base station (RBS), it has to deal with a series of technological challenges ranging from identifying hardware-related problems to manipulating connectors. This paper describes the development of a robot maintenance system dedicated to detect and resolve faulty links caused by unplugged or poorly connected cables. Although the maintenance system relies on four subsystems, we significantly focus on our low-cost and efficient custom gripper solution developed to handle RJ45 Ethernet connectors. To examine our gripper, we conducted three experiments. First, a qualitative questionnaire was submitted to 30 users in the case of the teleoperated scenario of the gripper attached to a robotic arm. Similarly, we also tested the automatic operation mode. The results showed that our system is reliable and delivers a highly efficient maintenance tool in both teleoperated and autonomous operation modes. The practical experiment containing the removal or unplugging of connectors demonstrated our gripper’s ability to adequately handle these, whereas the feedback from the questionnaire pointed to a positive user experience. The automatic test assessed the gripper’s robustness against the continuous operation.

     

Acoustic evaluation and adjustment of an open-plan office through architectural design and noise control

Arranging office space into a single open room offers advantages in terms of easy exchange of information and interaction among coworkers, but reduces privacy and acoustic comfort. Thus, the purpose of this work was to evaluate the acoustic quality of a real open-plan office and to propose changes in the room to improve the acoustic conditioning of this office. The computational model of the office under study was calibrated based on RT and STI measurements. Predictions were made of the RT and STI, which generated the radius of distraction r(D), and the rate of spatial decay of sound pressure levels per distance doubling DL(2) in the real conditions of the office and after modifications of the room. The insertion of dividers between work stations and an increase in the ceiling's sound absorption improved the acoustic conditions in the office under study.     

Off-Site Exposure to Respirable Aerosols Produced during the Disk-Incorporation of Class B Biosolids

Field experiments were conducted at a Class B biosolids land application site in central Arizona to measure, model, and source-track the off-site transport of aerosols emitted when biosolids were disk-incorporated into soils. Real-time PM10 monitoring provided time-resolved aerosol information sufficient for verifying both off-site concentration and off-site exposure time model results. Under the conditions considered and at a distance of 165?m from the aerosol source, biosolids disk-incorporation resulted in an intermittent exposure to biosolids-derived aerosol concentration between 15 and 40?μg/m3 and an inhalable biosolids dose between 2 and 8?μg. Transport modeling predicted that these doses will decrease with increasing wind speed. In addition, three DNA sequence-based biosolids source tracking methods were applied to aerosol samples and confirmed the presence of biosolids in aerosols at 5, 65, and 165?m from the aerosol source. Field measurements and modeling indicate that the nature of biosolids-derived aerosol exposure is a series of intermittent high concentration puffs, rather than a continuous low concentration.     

Proteomics identification of differentially expressed proteins in the muscle of dysferlin myopathy patients

The muscular dystrophies are a large and heterogeneous group of neuromuscular disorders that can be classified according to the mode of inheritance, the clinical phenotype and the molecular defect. To better understand the pathological mechanisms of dysferlin myopathy we compared the protein-expression pattern in the muscle biopsies of six patients with this disease with six patients with limb girdle muscular dystrophy 2A, five with facioscapulohumeral dystrophy and six normal control subjects. To investigate differences in the expression levels of skeletal muscle proteins we used 2-DE and MS. Western blot or immunohistochemistry confirmed relevant results. The study showed specific increase expression of proteins involved in fast-to-slow fiber type conversion (ankyrin repeat protein 2), type I predominance (phosphorylated forms of slow troponin T), sarcomere stabilization (actinin-associated LIM protein), protein ubiquitination (TRIM 72) and skeletal muscle differentiation (Rho-GDP-dissociation inhibitor ly-GDI) in dysferlin myopathy. As anticipated, we also found differential expression of proteins common to all the muscular dystrophies studied. This comparative proteomic analysis suggests that in dysferlin myopathy (i) the type I fiber predominance is an active process of fiber type conversion rather than a selective loss of type II fibers and (ii) the dysregulation of proteins involved in muscle differentiation further confirms the role of dysferlin in this process.     

A graph-based cache for large-scale similarity search engines

Large-scale similarity search engines are complex systems devised to process unstructured data like images and videos. These systems are deployed on clusters of distributed processors communicated through high-speed networks. To process a new query, a distance function is evaluated between the query and the objects stored in the database. This process relays on a metric space index distributed among the processors. In this paper, we propose a cache-based strategy devised to reduce the number of computations required to retrieve the top-k object results for user queries by using pre-computed information. Our proposal executes an approximate similarity search algorithm, which takes advantage of the links between objects stored in the cache memory. Those links form a graph of similarity among pre-computed queries. Compared to the previous methods in the literature, the proposed approach reduces the number of distance evaluations up to 60%.     

Swarm intelligence for traffic light scheduling: Application to real urban areas

Congestion, pollution, security, parking, noise, and many other problems derived from vehicular traffic are present every day in most cities around the world. The growing number of traffic lights that control the vehicular flow requires a complex scheduling, and hence, automatic systems are indispensable nowadays for optimally tackling this task. In this work, we propose a Swarm Intelligence approach to find successful cycle programs of traffic lights. Using a microscopic traffic simulator, the solutions obtained by our algorithm are evaluated in the context of two large and heterogeneous metropolitan areas located in the cities of Málaga and Sevilla (in Spain). In comparison with cycle programs predefined by experts (close to real ones), our proposal obtains significant profits in terms of two main indicators: the number of vehicles that reach their destinations on time and the global trip time.