Characterization of tributyrin hydrolysis by immobilized lipase on woolen cloth using conventional batch and novel spinning cloth disc reactors

Optimal loading and operating conditions for a new, superior immobilization of amano lipase from Pseudomonas fluorescens on woolen cloth were determined. The optimal enzyme loading was 46.8 mg g dry cloth⁻¹ with activity of 200 U. A batch reactor was used to characterize process conditions important to industrial application of the wool immobilized lipase. The optimal pH for immobilized lipase in tributyrin hydrolysis was 7, slightly lower than that of free lipase (pH 8). The optimal temperature for both free and immobilized lipase was 45 °C. The immobilized lipase was more stable to reuse than some other lipase immobilizations, maintaining 85% of its activity after 6 long term runs and 75.8% of the original activity after storage of 40 weeks at 4 °C. The thermal stability of lipase was improved by 2.4 times after immobilization. The thermal deactivation rate of immobilized lipase followed the Arrhenius law with E_d = 199 kJ mol⁻¹. The Michaelis–Menten constant (K_m) of the lipase increased from 1.63 mM to 4.48 mM after immobilization. The immobilized lipase was also successfully applied for tributyrin hydrolysis in a novel enzyme process intensification technology – the spinning cloth disc reactor (SCDR): conversion increased by around 13% under similar conditions compared to a conventional batch stirred tank reactor. The SCDR is therefore key to exploiting the advantages of the wool immobilized lipase developed in this work.     

Polymer electrolytes based on a ternary miscible blend of poly(ethylene oxide), poly(bisphenol A-co-epichlorohydrin) and poly(vinyl ethyl ether)

Ternary blends of poly(ethylene oxide) (PEO), poly(bisphenol A-co-epichlorohydrin) (PBE) and poly(vinyl ethyl ether) (PVEE) were obtained as films and characterized by differential scanning calorimetry (DSC) and vibrational spectroscopy (FTIR). From the DSC results, phase diagrams for the ternary blends were determined, where the variation of the viscoelastic phase extent as a function of the polymers composition was determined. The DSC results also indicated miscibility of the system, exhibiting only one glass transition temperature (T_g) and decrease in the crystallinity of the system, as well as decrease in the crystallinity of PEO present in the blends. Vibrational spectroscopy (FTIR) provided information on the intermolecular interactions between the pairs PBE/PEO and PBE/PVEE, via hydrogen bond interaction. From the FTIR analyses, molecular model systems of equilibrium among the interacting structures were proposed as a molecular basis for the miscibility of the system.Polymer electrolytes based on the ternary blend containing 60/25/15 (PEO/PBE/PVEE) mass percent and lithium perchlorate (LiClO₄) were obtained and characterized by DSC, FTIR, optical microscopy and electrochemical impedance spectroscopy (EIS). Solid electrolytes containing up to 10 wt% LiClO₄ exhibited a single-phase behavior, evidenced by the DSC results. For these electrolytes, FTIR spectra indicated the formation of polymer-ion complexes, in which the cation (Li⁺) acts favoring the polymer-polymer miscibility. Electrolytes containing LiClO₄ higher than 10 wt% exhibit a multiple phase behavior, in which a PEO-rich, salt-containing phase is present in equilibrium with PBE or PVEE-rich phases. Maximum ionic conductivity at room temperature, for the electrolyte containing 20 wt% LiClO₄, reached 4.23 × 10⁻³ Ω⁻¹ cm⁻¹, while all samples exhibited conductivity of approximately 10⁻¹ Ω⁻¹ cm⁻¹ at 80 °C.     

Evaluation of the effect of probiotic cultures added to commercial yogurt over a known population of Listeria monocytogenes and Escherichia coli O157:H7

The effect of probiotic cultures over Listeria monocytogenes and Escherichia coli O157:H7 during yogurt storage was evaluated. Two different yogurt brands, one with additional probiotic cultures (Lactobacillus casei and L. acidophilus) were inoculated with known populations (106 UFC/g) of either L. monocytogenes or E. coli O157:H7 in three different times and stored for 32 days at 5 degrees C. Every four days the count of lactic bacteria, the added pathogens and pH was evaluated, according to the methodology described in the Bacteriological Analytical Manual. The pH and lactic bacteria population were constant during the testing period. Yogurt with additional probiotic cultures reduced the population of L. monocytogenes in 8 days, the population of E. coli O157:H7 in 16; yogurt with no additional probiotics took 20 days to reduce L. monocytogenes to non-detectable levels and even after 28 days of storage, E. coli O157:H7 was cultured. In this work, the beneficial effects of additional probiotic cultures in yogurt is confirmed again.     

Effects of different particle deposition parameters on adhesion of resin cement to zirconium dioxide and phase transformation

This study evaluated the effect of air-abrasion parameters such as particle size, distance, and time on adhesion of resin cement to zirconium dioxide (Y-TZP) and t→m phase transformation. Y-TZP blocks (N = 80) (In-Ceram YZ, Vita) (4 mm^3?×?4 mm^3?×?3 mm³) were assigned into eight groups (n = 10): air-abrasion with 30 μm (CoJet Sand, S30) and 110 μm (Rocatec-Plus, S110) silica-coated alumina particles, applied for either for 10–20 s (T = time), from a distance of 10–20 mm (D = distance), composing the following groups: S₃₀T₁₀D₁₀, S₃₀T₁₀D₂₀, S₃₀T₂₀D₁₀, S₃₀T₂₀D₂₀, S₁₁₀T₁₀D₁₀, S₁₁₀T₁₀D₂₀, S₁₁₀T₂₀D₁₀, and S₁₁₀T₂₀D₂₀. Resin composite (RelyX ARC) was bonded to Y-TZP blocks in polyethylene molds. The specimens were aged (10,000 thermal cycles and water storage for 90 days) prior to shear bond test. Failure types were analyzed under stereomicroscope and SEM, and phase transformation was calculated. Data (MPa) were analyzed using 3-way ANOVA and Tukey’s tests. Air-abrasion with 110 μm silica particles (10.96) presented significantly higher bond strength (p = 0.0149) compared to 30 μm (8.96). Time (p = 0.403) and distance (p = 0.179) parameters did not affect the results significantly. Air-abrasion with 110 μm particles (12.3) promoted higher bond strength than that of 30 μm (6.4) when applied for 10 s from a distance of 10 mm (Tukey’s). Failure types were predominantly adhesive. Phase transformation ranged between 30.3 and 35.9% for 30 μm particles and 23.8–43.7% for 110 μm particles. While the size of silica-coated alumina particles were more relevant parameter for resin cement adhesion to Y-TZP, time (up to 20 s) and distance (up to 20 mm) appear to be less pertinent.     

Colloidal Processing of Zirconium Diboride Ultra‐High Temperature Ceramics

Colloidal processing of the Ultra‐High Temperature Ceramic (UHTC) zirconium diboride (ZrB₂) to develop near?net‐shaping techniques has been investigated. The use of the colloidal processing technique produces higher particle packing that ultimately enables achieving greater densification at lower temperatures and pressures, even pressureless sintering. ZrB₂ suspension formulations have been optimized in terms of rheological behavior. Suspensions were shaped into green bodies (63% relative density) using slip casting. The densification was carried out at 1900°C, 2000°C, and 2100°C, using both hot pressing at 40 MPa and pressureless sintering. The colloidally processed materials were compared with materials prepared by a conventional dry processing route (cold pressed at 50 MPa) and subjected to the same densification procedures. Sintered densities for samples produced by the colloidal route are higher than produced by the dry route (up to 99.5% relative density by hot pressing), even when pressureless sintering is performed (more than 90% relative density). The promising results are considered as a starting point for the fabrication of complex‐shaped components that can be densified at lower sintering temperatures without pressure.     

Emission inventory: An urban public policy instrument and benchmark

Global concern with climate change has led to the development of a variety of solutions to monitor and reduce emissions on both local and global scales. Under the United Nations Framework Convention on Climate Change (UNFCCC), both developed and emerging countries have assumed responsibility for developing and updating national inventories of greenhouse gas emissions from anthropic sources. This creates opportunities and incentives for cities to carry out their own local inventories and, thereby, develop air quality management plans including both essential key players and stakeholders at the local level. The aim of this paper is to discuss the role of local inventories as an urban public policy instrument and how this type of local instrument may bring advantages countrywide in enhancing the global position of a country. Local inventories have been carried out in many cities of the world and the main advantage of this is that it allows an overview of emissions produced by different municipal activities, thereby, helps decision makers in the elaboration of efficient air quality management plans. In that way, measures aimed at the reduction of fossil fuel consumption to lower local atmospheric pollution levels can also, in some ways, reduce GHG emissions.     

ZnO and CuO crystal precipitation in sintering Cu-doped Ni-Zn ferrites. I. Influence of dry relative density and cooling rate

This paper presents a study of the precipitation of ZnO and CuO crystals during the sintering of Cu-doped Ni-Zn ferrites. The nature of the Zn- and Cu-containing crystal precipitates was determined by scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) analysis, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The influence of the dry relative density of the body and the cooling rate on the occurring precipitates was also studied. Two consecutive chemical reactions are put forward, which explain the bulk precipitation of the zinc and copper oxides in the specimen during sintering, and their re-dissolution during cooling.     

Use of a new milk-clotting protease from Thermomucor indicae-seudaticae N31 as coagulant and changes during ripening of Prato cheese

Prato cheeses were manufactured using coagulant from Thermomucor indicae-seudaticae N31 or a commercial coagulant. Cheeses were characterised using the following analysis: yield; fat; acidity; moisture; ash; salt; pH; total nitrogen; total protein; NS-pH 4.6/NT*100; NS-TCA 12%/NT*100; casein electrophoresis; and RP-HPLC. The results were statistically analysed and revealed that the proteolytic indices were not significantly different throughout the 60 days of ripening of cheeses made with either coagulant. Even though there were some quantitative differences in the peptide profile of cheeses, the enzyme from T. indicae-seudaticae N31 was used in the production of good quality Prato cheese without having to change the established technological parameters of the process.     

Rats (Rattus norvegicus) in a water maze learn both an egocentric trajectory and landmarks.

In two experiments we investigated the extent to which rats (Rattus norvegicus) use an egocentric trajectory and landmarks to locate a goal. In Experiment 1 we trained groups to locate the hidden platform in a water maze with either 1 of 3 or 3 of 3 predictive landmarks, and with either a random or fixed egocentric trajectory. A choice test revealed that regardless of the landmark configuration, rats relied on a directional, egocentric trajectory, when it was available, to locate the platform. In Experiment 2 we found that adding four predictive landmarks following training with a constant egocentric trajectory did not alter rats' initial attention to the trajectory. We conclude that the presence of nonpredictive landmarks in a predictive array did not affect the use of landmarks. With a blocking design, rats used initially an egocentric path, then landmarks. These results add to the notion that animals use available spatial cues sequentially. (PsycINFO Database Record (c) 2010 APA, all rights reserved)