Assignment of the 2.03 ppm resonance in in vivo <Superscript>1</Superscript>H MRS of human brain tumour cystic fluid: contribution of macromolecules

MRI and MRS are established techniques for the evaluation of intracranial mass lesions and cysts. The 2.03 ppm signal recorded in their ¹H-MRS spectra is often assigned to NAA from outer volume contamination, although it has also been detected in non-infiltrating tumours and large cysts. We have investigated the molecular origin of this resonance in ten samples of cystic fluids from human brain tumours. The NMR detected content of the 2.03 ppm resonance in 136 ms echo time spectra, assuming an N- CH₃ origin, was 3.19 ± 1.01 mM. Only one third (34 ± 12%) of the N-acetyl containing compound (NAC) signal could be extracted by perchloric acid (PCA) indicating that most of it originated in a macromolecular PCA-insoluble component. Chemical analysis of the cyst fluids showed that sialic acid bound to macromolecules would account for 64.3% and hexuronic containing compounds for 29.2% of the NMR-detectable ex vivo signal, 93.4% of the signal at TE 136 ms. Lactate content measured by NMR (6.4 ± 4.4 mM) and the predominance of NAC originating in sialic acid point to a major origin from tumour rather than from plasma for this 2.03 ppm resonance.     

Industrial capacity planning in oligopolistic markets

Available productive capacity is determinant of a company’s success once it allows meeting the current and future demand. This article proposes a quantitative model for determining long-term productive capacity in competitive oligopolistic markets, based on the Nash Equilibrium formulated as a Variational Inequality problem. Numerical examples enable an analytical evaluation of the economic equilibrium’s sensitivity to marginal costs, investment costs, hurdle rate, and market saturation. Results show that, in order to achieve a greater market share, it is important to adopt strategies that reduce marginal costs. On the other hand, variations in the hurdle rate may or may not reinforce the position of a competitor in the market and his interest in investing in capacity expansion. Additionally, market saturation may be achieved, beyond which investment becomes unattractive. Each of these is a positive outcome for society, triggering diversified investments and competition in economic sectors where competition is low and profits are high.     

In Vitro Simultaneous Transfer of Lipids to HDL in Coronary Artery Disease and in Statin Treatment

The exchange of lipids with cells and other lipoproteins is a crucial process in HDL metabolism and for HDL antiatherogenic function. Here, we tested a practical method to quantify the simultaneous transfer to HDL of phospholipids, free-cholesterol, esterified cholesterol and triacylglycerols and to verify the lipid transfer in patients with coronary artery disease (CAD) or undergoing statin treatment. Twenty-eight control subjects without CAD, 27 with CAD and 25 CAD patients under simvastatin treatment were studied. Plasma samples were incubated with a donor nanoemulsion prepared by ultrasonication of the constituent lipids and labeled with radioactive lipids; % lipids transferred to HDL were quantified in the HDL-containing supernatant after chemical precipitation of non-HDL fractions and the nanoemulsion. The assay was precise and reproducible. Increase of temperature (4–37 °C), of incubation period (5 min to 2 h), of HDL-cholesterol concentration (33–244 mg/dL) and of mass of nanoemulsion lipids (0.075–0.3 mg/μL) resulted in increased lipid transfer from the nanoemulsion to HDL. In contrast, increasing pH (6.5–8.5) and albumin concentration (3.5–7.0 g/dL) did not affect lipid transfer. There was no difference between CAD and control non-CAD with regard to the lipid transfer, but statin treatment reduced the transfer to HDL of all four lipids. The test herein described is a valid and practical tool for exploring an important aspect of HDL metabolism.     

Enhancement of pasta antioxidant activity with oregano and carrot leaf

Five different pasta formulations were prepared using different concentrations of carrot leaf meal (CLM) and oregano leaf meal (OLM). One control formulation (wheat flour and semolina, 70:30 w/w) and four other formulations were prepared using the following amounts of leaf meals: 5% CLM and 5% OLM (I), 10% CLM (II), 10% OLM (III), and 10% CLM, 10% OLM (IV). The highest content of alpha-linolenic acid was found in formulations II and IV, which also had a reduced n-6/n-3 ratio, 3.6 (IV), when compared to the control, which was 19.8. All the samples enhanced with leaf meals showed antioxidant activity by the DPPH radical method; however, it was higher in formulation IV, which was the same observed for phenolic compounds. Pasta added with leaf meals lost more solubles, had shorter cooking time and a lower weight increase than the control pasta. All formulations had significant sensory acceptance.     

Influence of dispersant size on rheology of non-aqueous ceramic particle suspensions

The surface of alumina, which is hydrophilic in general, was made hydrophobic either by adsorption of polymer (phys-adsorption) or by an alkylation reaction with alcohol (chem-adsorption) to enable dispersion in dodecane. Hypermer A70 (8.2 nm) was used as the polymer and 1-octanol (1.2 nm), 1-decanol (1.5 nm) and 1-hexadecanol (2.5 nm) were used as the alcohol (values in brackets are the approximate thickness of the steric barrier). Rheological measurements of ceramic suspensions indicate that it is possible to achieve a high solid loading (50 vol.%) with relatively low viscosity (0.25 Pa s at 100 s^?1, the typical shear rate for pumping of liquids in pipes) as long as the stabilising molecule is large enough. The observed rheological behaviour fitted the Quemada viscosity model quite well when excluded volume effects were taken into account. Addition of 2.8 wt.% of Hypermer A70 with respect to weight of alumina was enough to stabilise the particles.     

The effect of chlorine and oxygen concentrations on the removal of mercury at an FGD-batch reactor

A series of laboratory scale experiments were conducted in an FGD-batch reactor. A synthetic flue gas was produced and directed through a CaCO₃ suspension contained in a glass reactor vessel. The suspension temperature was set at 54 °C through a water bath. In order to observe the distribution of mercury species in the system, solid, liquid and gaseous samples were taken and analysed. For gaseous mercury determination, continuous measurements were carried out, up and downstream the reactor. Furthermore, the concentration of chlorine in the scrubber solution of the system was varied from 0 to 62 g/l under different oxidative conditions.In a first approach, a concentration drop of elemental mercury coming out of the system was observed. The latter occurs only when high concentrations of Cl⁻ are present, combined with a high O₂ availability in the scrubber. It was also observed that mercury species distribution in the different phases varies, depending on the available chemical form of chlorine and oxygen concentration.     

Simultaneous determination of flavor enhancers in stock cube samples by using spectrophotometric data and multivariate calibration

Spectrophotometric data followed by a suitable treatment of chemometric analysis were used for the simultaneous determination of monosodium glutamate (MSG), guanosine 5′-monophosphate (GMP) and inosine 5′-monophosphate (IMP) in stock cube samples, without any previous extraction step. By this way, the overlapping of the absorption spectra was resolved using a PLS-1 model. The concentration for experimental calibration matrix were varied between 5.03–34.2 μg mL⁻¹ for IMP and GMP, and 448–1399 μg mL⁻¹ for MSG. The relative errors of prediction (REPCV %) were 1.8, 2.8 and 3.1 for IMP, GMP and MSG, respectively.     

An assessment of advanced mobile services acceptance: Contributions from TAM and diffusion theory models

Today, in addition to traditional mobile services, there are new ones already being used, thanks to the advances in 3G-related technologies. Our work contributed to the emerging body of research by integrating TAM and Diffusion Theory. Based on a sample of 542 Dutch consumers, we found that traditional antecedents of behavioral intention, ease of use and perceived usefulness, can be linked to diffusion-related variables, such as social influence and perceived benefits (flexibility and status).     

Changes in actin and tubulin expression in osteogenic cells cultured on bioactive glass‐based surfaces

The present study evaluated whether the changes in the labeling pattern of cytoskeletal proteins in osteogenic cells cultured on bioactive glass‐based materials are due to altered mRNA and protein levels. Primary rat‐derived osteogenic cells were plated on Bioglass® 45S5, Biosilicate®, and borosilicate (bioinert control). The following parameters were assayed: (i) qualitative epifluorescence analysis of actin and tubulin; (ii) quantitative mRNA and protein expression for actin and tubulin by real‐time PCR and ELISA, respectively, and (iii) qualitative analysis of cell morphology by scanning electron microscopy (SEM). At days 3 and 7, the cells grown on borosilicate showed typical actin and tubulin labeling patterns, whereas those on the bioactive materials showed roundish areas devoid of fluorescence signals. The cultures grown on bioactive materials showed significant changes in actin and tubulin mRNA expression that were not reflected in the corresponding protein levels. A positive correlation between the mRNA and protein as well as an association between epifluorescence imaging and quantitative data were only detected for the borosilicate. SEM imaging of the cultures on the bioactive surfaces revealed cells partly or totally coated with material aggregates, whose characteristics resembled the substrate topography. The culturing of osteogenic cells on Bioglass® 45S5 and Biosilicate® affect actin and tubulin mRNA expression but not the corresponding protein levels. Changes in the labeling pattern of these proteins should then be attributed, at least in part, to the presence of a physical barrier on the cell surface as a result of the material surface reactions, thus limiting fluorescence signals. Microsc. Res. Tech. 78:1046–1053, 2015. © 2015 Wiley Periodicals, Inc.     

Metabolic analysis of the removal of formic acid by unacclimated activated sludge

This paper investigates the removal of formic acid by unacclimated biomass from a municipal activated sludge wastewater treatment plant. The biomass was initially able to remove formic acid, but its removal rate and Oxygen Uptake Rate (OUR) decreased with time, until formic acid removal stopped before the formic acid had been exhausted. Formaldehyde was removed in a similar way, whereas the same biomass was simultaneously able to grow and store PHAs when acetic acid was used as substrate.Batch tests with glycine and ¹³C NMR analysis were performed, showing that unacclimated biomass was not able to synthesize all the metabolic intermediates from formic acid alone. At least glycine needed to be externally supplemented, in order to activate the serine synthesis pathway. A small amount of formic acid removal in the absence of growth was also possible through formaldehyde formation and its further conversion to formalin (1,2-formaldehyde dimer), whereas no PHAs were formed.