Suspension concentration profiles during rapid gravity filter backwashing

Rapid gravity, granular media filters are widely used in the water and wastewater treatment industries. Regular backwashing to clean the filters is a vital part of their efficient operation. Experimental data on the development of suspension concentration profiles through laboratory scale filter beds during the backwash process were obtained. Previous attempts to obtain and record backwash profiles of this type have been unsuccessful due to the limited range of existing turbidimeters. The results have been used to validate a new model developed by the authors.     

Comparison of Antifungal and Antioxidant Activities of <Emphasis Type="Italic">Acacia mangium</Emphasis> and <Emphasis Type="Italic">A. auriculiformis</Emphasis> Heartwood Extracts

The effect of heartwood extracts from Acacia mangium (heartrot-susceptible) and A. auriculiformis (heartrot-resistant) was examined on the growth of wood rotting fungi with in vitro assays. A. auriculiformis heartwood extracts had higher antifungal activity than A. mangium. The compounds 3,4,7,8-tetrahydroxyflavanone and teracacidin (the most abundant flavonoids in both species) showed antifungal activity. A. auriculiformis contained higher levels of these flavonoids (3.5- and 43-fold higher, respectively) than A. mangium. This suggests that higher levels of these compounds may contribute to heartrot resistance. Furthermore, both flavonoids had strong 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity and laccase inhibition. This suggests that the antifungal mechanism of these compounds may involve inhibition of fungal growth by quenching of free radicals produced by the extracellular fungal enzyme laccase.     

Evaluation of natural and synthetic compounds according to their antioxidant activity using a multivariate approach

The antioxidant activity of natural and synthetic compounds was evaluated using five in vitro methods: ferric reducing/antioxidant power (FRAP), 2,2‐diphenyl‐1‐picrylhydradzyl (DPPH), oxygen radical absorption capacity (ORAC), oxidation of an aqueous dispersion of linoleic acid accelerated by azo‐initiators (LAOX), and oxidation of a meat homogenate submitted to a thermal treatment (TBARS). All results were expressed as Trolox equivalents. The application of multivariate statistical techniques suggested that the phenolic compounds (caffeic acid, carnosic acid, genistein and resveratrol), beyond their high antioxidant activity measured by the DPPH, FRAP and TBARS methods, showed the highest ability to react with the radicals in the ORAC methodology, compared to the other compounds evaluated in this study (ascorbic acid, erythorbate, tocopherol, BHT, Trolox, tryptophan, citric acid, EDTA, glutathione, lecithin, methionine and tyrosine). This property was significantly correlated with the number of phenolic rings and catecholic structure present in the molecule. Based on a multivariate analysis, it is possible to select compounds from different clusters and explore their antioxidant activity interactions in food products.     

Recycled carbon fiber filled polyethylene composites

Composites of recycled carbon fiber (CF) with up to 30 wt % loading with polyethylene (PE) were prepared via melt compounding. The morphology of the composites and the degree of dispersion of the CF in the PE matrix was examined using scanning electron microscopy, and revealed the CF to be highly dispersed at all loadings and strong interfacial adhesion to exist between the CF and PE. Raman and FTIR spectroscopy were used to characterize the surface chemistry and potential bonding sites of recycled CF. Both the Young's modulus and ultimate tensile stress increased with increasing CF loading, but the percentage stress at break was unchanged up to 5 wt % loading, then decreased with further successive addition of CF. The effect of CF on the elastic modulus of PE was examined using the Halpin‐Tsai and modified Cox models, the former giving a better fit with the values determined experimentally. The electrical conductivity of the PE matrix was enhanced by about 11 orders of magnitude on addition of recycled CF with a percolation threshold of 7 and 15 wt % for 500‐μm and 3‐mm thick samples. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effects of low-temperature aging on AISI 444 steel

The consequences of aging at 400 and 475 °C on the mechanical properties, corrosion resistance, and magnetic properties of the ferritic stainless steel (SS) AISI 444 were investigated. Age hardening was measured as a function of aging time at both temperatures and was found to be more intense at 475 °C. The localized corrosion susceptibility increased, while the impact toughness decreased with aging time. These two effects were also more important at 475 °C. Unlike duplex SSs, AISI 444 did not present any variation in coercive force or Curie temperature with aging time. The effects on the Mössbauer spectra were also determined and analyzed.     

pH sensitive phosphate crosslinked films of starch-carboxymethyl cellulose

This work aims to develop hydrogel films of starch and carboxymethyl cellulose (CMC) crosslinked with sodium trimetaphosphate (STMP) and to characterize some of their properties. Starch and STMP (S/T), starch and CMC (S/C), and mixed (S/T/C) films were prepared by casting. The degree of substitution, morphology, swelling degree, FTIR, mechanical properties, and sorption isotherms were studied. Reticulated samples (S/T and S/T/C) showed the same degree of substitution (0.050 ± 0.001). All films presented homogeneous morphology, but the mixed film showed greater roughness. Crosslinking increased the swelling capacity of the mixed hydrogel at pH 7, although it remained decreased concerning the S/T hydrogel. However, this property was sensitive to pH variations. The mixed film (S/T/C) showed greater mechanical resistance. The casting process was efficient to produce hydrogel films of starch/CMC crosslinked with STMP and the general results demonstrated the advantages of the mixed hydrogel.     

Influence of nucleation and growth mechanisms on the heat deflection temperature of a reactively processed polypropylene nanocomposite

The development of a reactively processed polypropylene nanocomposite (PPNC) with consequential improvements in the heat deflection temperature (HDT), Vicat softening temperature (VST), and crystallization peak temperature (T_c) is reported herein. Neat PP without nanoclay was also reactively processed to elucidate the effects of fillers on the improvement in physical properties. The results show a considerable improvement in the HDT of PPNC (77.9 °C) compared to those of neat PP (62.6 °C) and reactively processed branched PP (BPP; 69.2 °C). Moreover, the T_c of PP in PPNC improved by ~14% compared to that of neat PP. Various models of nonisothermal crystallization kinetics were employed to elucidate the nucleation and crystal growth mechanisms, and to correlate them with the observed HDT improvement in PPNC. Thermal transitions investigated by modulated differential scanning calorimetry explained the changes observed in the VSTs of all the samples. To the best of our knowledge, this is the first report on a significant improvement in HDT along with a marked increase in Tc. Such simultaneous improvements in HDT, VST, and T_c are highly desirable for applications involving the use of PP-based materials in rigid packaging.     

Multicomponent Bioluminescence Imaging with Naphthylamino Luciferins

Bioluminescent tools have been used for decades to image processes in complex tissues and preclinical models. However, few distinct probes are available to probe multicellular interactions. We and others are addressing this limitation by engineering new luciferases that can selectively process synthetic luciferin analogues. In this work, we explored naphthylamino luciferins as orthogonal bioluminescent probes. Three analogues were prepared using an optimized synthetic route. The luciferins were found to be robust emitters with native luciferase in vitro and in cellulo. We further screened the analogues against libraries of luciferase mutants to identify unique enzyme-substrate pairs. The new probes can be used in conjunction with existing bioluminescent tools for multi-component imaging.     

Development and Characterization of a Multiplex Assay to Quantify Complement-Fixing Antibodies against Dengue Virus

Antibodies capable of activating the complement system (CS) when bound with antigen are referred to as “complement-fixing antibodies” and are involved in protection against Flaviviruses. A complement-fixing antibody test has been used in the past to measure the ability of dengue virus (DENV)-specific serum antibodies to activate the CS. As originally developed, the test is time-consuming, cumbersome, and has limited sensitivity for DENV diagnosis. Here, we developed and characterized a novel multiplex anti-DENV complement-fixing assay based on the Luminex platform to quantitate serum antibodies against all four serotypes (DENV1-4) that activate the CS based on their ability to fix the complement component 1q (C1q). The assay demonstrated good reproducibility and showed equivalent performance to a DENV microneutralization assay that has been used to determine DENV serostatus. In non-human primates, antibodies produced in response to primary DENV1-4 infection induced C1q fixation on homologous and heterologous serotypes. Inter-serotype cross-reactivity was associated with homology of the envelope protein. Interestingly, the antibodies produced following vaccination against Zika virus fixed C1q on DENV. The anti-DENV complement fixing antibody assay represents an alternative approach to determine the quality of functional antibodies produced following DENV natural infection or vaccination and a biomarker for dengue serostatus, while providing insights about immunological cross-reactivity among different Flaviviruses.