Energieeffizienz in der Vakuumtechnik

Energy efficiency in vacuum technology Vacuum is used to produce a huge variety of products of our everyday life. To provide the vacuum environment, a lot of energy is usually used and therefore the vacuum pumps should run as efficient as possible. Actually, many various improvements can be made to gain energy savings on vacuum pumps. With those considered in this paper it's possible to save 928 GWh/a of energy in the EU and thereof 629 GWh/a or 64 % are economically realizable. Only specific improvements concerning the vacuum system are taken into account, basic technology options, like motors, controls, etc., are excluded. To show and discuss the results a conserved energy supply curve is used.     

Neural networks as material models within a multiscale approach

This paper shows the application of neural networks in a multiscale analysis of a reinforced concrete beam. A mesoscale model is presented, which simulates the pullout test of a reinforcement bar in concrete. By applying a homogenization procedure, a macroscopic stress vs. crack opening response is obtained from the mesoscale simulations. The neural network is used to approximate this relation in a macroscale simulation and replaces the material formulation of the interface layer between concrete and reinforcement, thus avoiding the computationally expensive parallel simulation on different scales.     

Playing chess unconsciously.

Expertise in a certain stimulus domain enhances perceptual capabilities. In the present article, the authors investigate whether expertise improves perceptual processing to an extent that allows complex visual stimuli to bias behavior unconsciously. Expert chess players judged whether a target chess configuration entailed a checking configuration. These displays were preceded by masked prime configurations that either represented a checking or a nonchecking configuration. Chess experts, but not novice chess players, revealed a subliminal response priming effect, that is, faster responding when prime and target displays were congruent (both checking or both nonchecking) rather than incongruent. Priming generalized to displays that were not used as targets, ruling out simple repetition priming effects. Thus, chess experts were able to judge unconsciously presented chess configurations as checking or nonchecking. A 2nd experiment demonstrated that experts' priming does not occur for simpler but uncommon chess configurations. The authors conclude that long-term practice prompts the acquisition of visual memories of chess configurations with integrated form-location conjunctions. These perceptual chunks enable complex visual processing outside of conscious awareness. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Gait generation considering dynamics for artificial segmented worms

This paper deals with terrestrial worm-like locomotion systems living in a straight line. They are modeled as chains of mass points having ground interaction via spikes which make the velocities unidirectional. A method is presented to construct gaits with any desired time pattern of resting mass points (which are acted on by the propulsive forces). Taking the dynamics into consideration, conclusions about the choice and shift of gaits in connection with actuator data are given.     

Fire resistance of wood treated with a cationic silica sol

Wood was treated with the cationic silica sol (CSS) Levasil 200S and dried at various temperatures (room temperature, 40, 60, 80 and 103 °C). A water leaching test revealed fixation of the silica in wood even after drying at room temperature. Maximum cross sectional swelling of the specimens decreased from 15.6 % (untreated control) to 13.0 %, when treated wood was dried at 103 °C; cell wall bulking values were also negative (?2.3 %), indicating a thermal degradation of the cell wall polymers catalyzed by the CSS. Penetration of the CSS into the cell wall did not occur. A simple flammability test revealed increased fire resistance of the treated wood. Mass loss and velocity of mass loss as well as burning time were reduced; glowing of the formed charcoal was completely prevented. The effectiveness increased with increasing weight percent gain of the CSS in the wood. Thermo gravimetric analysis under nitrogen atmosphere displayed only minor reduction in the initial temperature of thermal decomposition for wood treated with CSS as compared to the control. In the presence of oxygen the resulting charcoal showed comparable thermal behaviour to the control. The yield of charcoal after pyrolysis was increased to a minor extent (from 19.9 to 23.0 %), indicating that the release of combustible gases was hardly reduced. The mode of action of enhanced fire resistance due to CSS-treatment is discussed.     

Einsatzpotenziale von XML in Business-Intelligence-Systemen

This article describes the actual applications of XML in the context of Business- Intelligence-Systems (BI). The potentials and synergies of XML and BI will be emphasized.

1. XML applications can be found within all levels of BI-systems.
2. The application of core-standards will be introduced as well as the possibilities of BI specific-standards.
3. The discussion of the impact of XML for BI-systems follows along the dimensions: externalisation, integration, standardisation and rationalization.

     

Design of near-field holographic optical elements by grating matching

A new method for designing holographic optical elements is presented. The method is based on matching the grating-spacing profile of the recording light interference pattern to the desired grating-spacing profile. We show that for designing near-field holograms, in which the optical images involved are close to the hologram aperture, the grating-matching technique is superior to the well-established aberration-balancing method introduced by Latta [Appl. Opt. 10, 609 (1971)].     

Cuprates and Ruthenates: Similarities and Differences

There is growing evidence that the p-wave superconductivity of Sr₂RuO₄ occurs primarily in the planar -band. Thus the minimum model for both cuprates and ruthenates is a single active band with onsite Coulomb interactions. Recent renormalization group analysis shows that such a model can show singlet d-wave or triplet p-wave pairing. The energy of the van Hove singularity in the band and the shape of the Fermi surface are the decisive factors at weak to moderate interaction strengths.     

Resonance and nonresonant laser ionization of sputtered uranium atoms from thin films and single microparticles: evaluation of a combined system for particle trace analysis

The resonance and nonresonant laser ionization of uranium atoms sputtered from thin metal films and individual micrometer-size uranium oxide particles, respectively, was studied to evaluate a new setup for the analysis of actinide-containing micrometer-size particles. Experiments using nonresonant (193-nm) ionization of atoms and molecules sputtered from micrometer-size uranium oxide particles have shown that the uranium detection efficiencies for sputtered neutral atoms are approximately 2 orders of magnitude higher than for secondary ions. In uranium particles of 0.5-microm diameter, 6 x 10(6) atoms of 235U were easily detected and the isotopic ratio of 235U/238U = 0.0048 +/- 4.6% is in excellent agreement with the certified value. The use of two-color, two-step resonance ionization of the sputtered neutral uranium atoms from thin films was investigated. Several excitation schemes were tested, and a significant population of several low-lying metastable states after ion sputtering was observed. Autoionizing states for double-resonant ionization were determined, and the high selectivity of ionization schemes involving these autoionizing states was illustrated by comparing the flight-time distributions of different sputtered species obtained both by resonance and nonresonant multiphoton (355-nm) laser postionization. Ideally, the options for resonance as well as nonresonant ionization would be combined in a single setup, to obtain a large gain in sensitivity and selectivity. Thus, information about the main components as well as specific isotopic information of a trace element could be obtained from the same single particle.