Analysis of ground reaction force and electromyographic activity of the gastrocnemius muscle during double support

Mechanisms associated with energy expenditure during gait have been extensively researched and studied. According to the double-inverted pendulum model energy expenditure is higher during double support, as lower limbs need to work to redirect the centre of mass velocity. This study looks into how the ground reaction force of one limb affects the muscle activity required by the medial gastrocnemius of the contralateral limb during step-to-step transition. Thirty-five subjects were monitored as to the medial gastrocnemius electromyographic activity of one limb and the ground reaction force of the contralateral limb during double support. After determination of the Pearson correlation coefficient (r), a moderate correlation was observed between the medial gastrocnemius electromyographic activity of the dominant leg and the vertical (Fz) and anteroposterior (Fy) components of ground reaction force of the non-dominant leg (r = 0.797, p < 0.000 1; r = -0.807, p < 0.000 1). A weak and moderate correlation was observed between the medial gastrocnemius electromyographic activity of the non-dominant leg and the Fz and Fy of the dominant leg, respectively (r = 0.442, p = 0.018; r = -0.684 p < 0.000 1). The results obtained suggest that during double support, ground reaction force is associated with the electromyographic activity of the contralateral medial gastrocnemius and that there is an increased dependence between the ground reaction force of the non-dominant leg and the electromyographic activity of the dominant medial gastrocnemius.     

An economic–probabilistic model for project selection and prioritization

This paper presents an economic–probabilistic model for project selection and prioritization that enables necessary investments and potential benefits and their inherent variability to be quantified, thus providing a stochastic analysis of expected returns for projects. The model was developed in three steps: definition of criteria; definition of the most appropriate method to be used; and model building. A practical test to evaluate the applicability and usefulness of the model comprising a portfolio of investment projects at a power distribution company was conducted. The results show three major contributions of the proposed model: i) a set of sufficiently complete criteria, ii) the combined use of economic and probabilistic approaches which qualifies the information available to decision makers, and iii) the use of financial language, which is more easily understood and has a concrete meaning for both management and technical staff.     

Biodegradation of 2-fluorobenzoate and dichloromethane under simultaneous and sequential alternating pollutant feeding

Two up-flow fixed-bed reactors (UFBRs), inoculated with activated sludge and operated for 162 days, were fed 1mmolL(-1)d(-1) with two model halogenated compounds, 2-fluorobenzoate (2-FB) and dichloromethane (DCM). Expanded clay (EC) and granular activated carbon (GAC) were used as biofilm carrier. EC did not have any adsorption capacity for both model compounds tested, whereas GAC could adsorb 1.3mmolg(-1) GAC for 2-FB and 4.5mmolg(-1) GAC for DCM. Both pollutants were degraded in both reactors under simultaneous feeding. However, biodegradation in the EC reactor was more pronounced, and re-inoculation of the GAC reactor was required to initiate 2-FB degradation. Imposing sequential alternating pollutant (SAP) feeding caused starvation periods in the EC reactor, requiring time-consuming recovery of 2-FB biodegradation after resuming its feeding, whereas DCM degradation recovered significantly faster. The SAP feeding did not affect performance in the GAC reactor as biodegradation of both pollutants was continuously observed during SAP feeding, indicating the absence of true starvation.     

Impact of aliphatic amine comonomers on DGEBA epoxy network properties

This study characterized the mechanical and thermal properties of the oligomer‐based formulations of the diglycidyl ether of bisphenol A (DGEBA) cured with series aliphatic amines (triethylenetetramine (TETA), tetraethylenepentamine (TEPA) and O,O bis (2‐aminopropyl propylene glycol) (Jeffamine D230) with different functionalities in the glassy state. Impact Izod and three‐point bending tests were conducted to determine the networks' impact energy (E_i), elasticity modulus (E_y), yield stress (σ_y) and fracture toughness (K_IC) values. The same three‐point bending mode was also employed to characterize the systems' thermo‐mechanical properties (DMA) and storage modulus (E') and damping modulus (tan δ = E"/E') values. The DGEBA/D230 network showed greater flexibility, maximum impact energy, higher fracture toughness, and a lower yield stress than the DGEBA/TETA and DGEBA/TEPA networks. The fracture behavior of these epoxy systems was correlated to the molecular weight between the crosslink points, M_c, and the plastic zone size (r_p) at the crack tip carved in the samples. The DGEBA/D230 network had the highest storage modulus and tan δ intensity, together with higher toughness and deformation during the network's fracture. These results were a consequence of the structural characteristics of comonomers, including their chain segment flexibility, molecular weight between crosslink points and functionality. POLYM. ENG. SCI., 54:2132–2138, 2014. © 2013 Society of Plastics Engineers     

Transition from Cyclosporine-Induced Renal Dysfunction to Nephrotoxicity in an in Vivo Rat Model

Cyclosporin A (CsA), a calcineurin inhibitor, remain the cornerstone of immunosuppressive regimens, regardless of nephrotoxicity, which depends on the duration of drug exposure. The mechanisms and biomarkers underlying the transition from CsA-induced renal dysfunction to nephrotoxicity deserve better elucidation, and would help clinical decisions. This study aimed to clarify these issues, using a rat model of short- and long-term CsA (5 mg/kg bw/day) treatments (3 and 9 weeks, respectively). Renal function was assessed on serum and urine; kidney tissue was used for histopathological characterization and gene and/or protein expression of markers of proliferation, fibrosis and inflammation. In the short-term, creatinine and blood urea nitrogen (BUN) levels increased and clearances decreased, accompanied by glomerular filtration rate (GFR) reduction, but without kidney lesions; at that stage, CsA exposure induced proliferating cell nuclear antigen (PCNA), transforming growth factor beta 1 (TGF-β1), factor nuclear kappa B (NF-κβ) and Tumor Protein P53 (TP53) kidney mRNA up-regulation. In the long-term treatment, renal dysfunction data was accompanied by glomerular and tubulointerstitial lesions, with remarkable kidney mRNA up-regulation of the mammalian target of rapamycin (mTOR) and the antigen identified by monoclonal antibody Ki-67 (Mki67), accompanied by mTOR protein overexpression. Transition from CsA-induced renal dysfunction to nephrotoxicity is accompanied by modification of molecular mechanisms and biomarkers, being mTOR one of the key players for kidney lesion evolution, thus suggesting, by mean of molecular evidences, that early CsA replacement by mTOR inhibitors is indeed the better therapeutic choice to prevent chronic allograft nephropathy.     

Thermosetting polyurethane‐multiwalled carbon nanotube composites: Thermomechanical properties and nanoindentation

In this study, composites based on a thermoset polyurethane elastomer (PU) and multiwalled carbon nanotubes (MWCNT) in the case of a PU of high elastic modulus (>200 MPa) are analyzed for the first time. As‐grown and modified nanotubes with 4 wt % of oxygenated functions (MWCNT‐ox) were employed to compare their effect on composite properties and maxima mechanical properties (elastic modulus and tensile strength) were reached at 0.5 wt % of MWCNT‐ox. Furthermore, by examining the morphology using optical and electron microscopies better dispersion and interaction of the nanotube‐matrix was observed for this material. DMTA data supports the observation of an increase in the glass transition temperature of ～20°C in the nanocomposites compared with the thermoset PU, which is an important result because it shows extended reliability in extreme environments. Finally, nanoindentation tests allowed a comparison with the conventional mechanical tests by measuring the elastic modulus and hardness at the subsurface of PU and the nanocomposites. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41207.     

Electrospinning polycaprolactone dissolved in glacial acetic acid: Fiber production,nonwoven characterization,and In Vitro evaluation

The electrospinning of polycaprolactone (PCL) dissolved in glacial acetic acid and the characterization of the resultant nonwoven fiber mats is reported in this work. For comparison purposes, PCL fiber mats were also obtained by electrospinning the polymer dissolved in chloroform. Given the processing parameters chosen, results show that 14 and 17 wt % PCL solutions are not viscous enough and yield beaded fibers, 20 and 23 wt % solutions give rise to high quality fibers and 26 wt % solutions yield mostly irregular and fused fibers. The nonwoven mats are highly porous, retain the high tensile strain of PCL, and the fibers are semicrystalline. Cells adhere and proliferate equally well on all mats, irrespective of the solvent used in their production. In conclusion, mats obtained by electrospinning PCL dissolved in acetic acid are also a good option to consider when producing scaffolds for tissue engineering. Moreover, acetic acid is miscible with polar solvents, which may allow easier blending of PCL with hydrophilic polymers and therefore achieve the production of electrospun nanofibers with improved properties. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41068.     

Analytical model for aircraft design based on Design for Excellence (DFX) concepts and use of composite material oriented to automated processes

This paper focuses on a development of a design analysis model that uses the requirements and concepts of Design for Excellence and the composite materials for specific application to the aeronautical design aiming to automation process. Its main goal is to drive the engineers who work on product development phase about the automation benefits that can be achieved when this proposed analytical model is used. A case study is presented to validate the analytical model's effectiveness.     

Comparison of different procedures for the detoxification of eucalyptus hemicellulosic hydrolysate for use in fermentative processes

Eucalyptus (Eucalyptus grandis) shavings were submitted to an acid hydrolysis process with the aim of obtaining a hemicellulosic hydrolysate rich in fermentable sugars. However, the hydrolysate obtained contained, in addition to sugars, several compounds that are toxic to microorganisms, namely furfural, hydroxymethylfurfural, acetic acid and phenolics. In order to produce a hydrolysate suitable for use in fermentative processes, several procedures were evaluated for hydrolysate detoxification, including concentration by vacuum evaporation and adsorption on activated charcoal, diatomaceous earths, ion‐exchange resin or adsorbent resin. Hydrolysate concentration was especially effective for furfural removal, whereas the adsorbent resin was efficient in removing hydroxymethylfurfural, phenolics and acetic acid. Combination of this resin with activated charcoal was better than with diatomaceous earths for removal of acetic acid and phenolics. The best detoxification procedure evaluated was based on hydrolysate concentration followed by adsorption on activated charcoal and adsorbent resin. By this treatment, removal rates of 82.5, 100, 100 and 94% were attained for acetic acid, furfural, hydroxymethylfurfural and phenolics, respectively. Copyright © 2005 Society of Chemical Industry     

Lipid Content and Fatty Acid Composition of 15 Marine Fish Species from the Southeast Coast of Brazil

Lipid content and fatty acid composition were determined in edible meat of fifteen marine fish species caught on the Southeast Brazilian coast and two from East Antarctic. Most of the fish had lipid amounts lower than 10% of their total weight. Palmitic acid (C16:0) predominated, accounting for 54–63% of the total amount of saturated fatty acids. Oleic acid (C18:1n-9) was the most abundant (49–69%) monounsaturated fatty acid, and docosahexaenoic acid (DHA) was the predominant polyunsaturated fatty acid (PUFA), accounting for 31–84% of n-3 PUFA. n-3 PUFA level were highest in Antarctic fish meat, comprising 45% of the total fatty acid content, which consisted of mainly EPA (16.1 ± 1.5 g/100 g lipids) and DHA (24.8 ± 2.4 g/100 g lipids). The amounts of EPA + DHA in g/100 g of lipids on the Southeast Brazilian coast and Antarctic fish species investigated were found to be similar: 42.0 ± 1.7 for Bonito cachorro, 41.0 ± 2.3 for Atum, and 39.4 ± 1.8 for peixe porco, respectively. All the studied species exhibited an n-3/n-6 ratio higher than 3, which confirms the great importance of Southeast Brazilian coast fish as a significant dietary source of n-3 PUFA.