Circadian variations in the occurrence of cardiac arrests: initial and repeat episodes

The purpose of this study was to predict diameters of lesions induced by laser-induced thermotherapy (LITT) of benign prostatic hyperplasia (BPH) from MRI signal/tissue temperature correlations during on-line monitoring with a temperature-sensitive fast low-angle shot (FLASH) sequence. Twenty LITT procedures with Nd:YAG (1,064 nm) and diode (830 nm) lasers were monitored on line with a T1-weighted FLASH sequence at 1.5 Tesla. Interstitial prostate temperature (T) was measured on line in 10 LITT procedures and laser energy deposition in 12. Slopes of linear regression curves for signal intensity (SI) over T were applied to determine SI at 60 degrees C to estimate diameters of intraprostatic LITT lesions. Diameters of unperfused LITT lesion cores in contrast-enhanced T1-weighted images served as gold standards. Linear regression curves with an average slope of -.54% SI/degrees C were obtained in 17 LITT procedures. Correlation coefficients were r = .92-.95 for SI/T and SI/energy deposition. Baseline variation of SI at body temperature was +/-3.9%, corresponding to +/-7 degrees C. Prediction of size (13 lesions) from on-line FLASH imaging was correct in 10 of 13, whereas 3 lesions were overestimated. Prediction of LITT lesion diameters from on-line MRI monitoring is possible with a temperature-sensitive FLASH sequence in the prostate. Accuracy may suffice to assign target regions of interest to tissue locations to be protected from coagulation.     

Intrathyroidal parathyroid glands can be a cause of failed cervical exploration for hyperparathyroidism

BACKGROUND: The incidence of intrathyroidal parathyroid glands remains controversial. The purpose of this study was to determine the incidence in a series of patients with hyperparathyroidism. METHODS: Three hundred nine patients underwent parathyroidectomy. Patients were divided into two groups: uniglandular disease versus hyperplasia. RESULTS: Eighteen of 309 patients (6%) had abnormal intrathyroidal parathyroid glands. The incidence was 3% (7 of 222) in patients with uniglandular disease versus 15% (11 of 73) in those with hyperplasia. With a mean follow-up of 54 months, 12 patients are eucalcemic, 5 have persistent hypocalcemia, and 1 has recurrent hypercalcemia. There were no recurrent laryngeal nerve injuries. CONCLUSIONS: These data suggest that an intrathyroidal adenoma is an uncommon cause of failure, whereas abnormal intrathyroidal parathyroid tissue may be a more common cause of failure in patients with hyperplasia.     

Mild traumatic brain injury--the Fife perspective

Excretion was studied of catecholamines and diphenilamine (DOPA) in 310 patients with carcinoma of the stomach and large intestine and 43 patients with non-malignant diseases. The oncological patients showed decrease in activity of the mediator link of the sympathoadrenal system (SAS) as well as its reserves but there was no association with sex, age, location or histological structure. Three types of SAS functioning were identified, such as compensation, overstrain and emaciation. Surgical intervention led to activation of the hormonal link and exhaustion of the system's reserves. Two kinds of sympathoadrenal response to stress were described--adequate and inadequate. In the former type, phases of stress remain as they are, unchanged, as are time periods of formation thereof, while under the latter one time periods of the phases formation or formation thereof get disordered.     

A Study of the Interaction of Polycyclic Derivatives of Azaquinolizinium Salts with DNA

A series of phenanthro and acenaphtho azaquinolizinium salts was selected as model heterocyclic polyaromatic compounds to study their interaction with deoxyribonucleic acid (DNA). The compounds exhibit a notable native fluorescence ( u em = 450-520 nm) in buffered aqueous solutions, as expected from planar aromatic heterocycles. However, in the presence of increasing concentrations of DNA (0, 10-90 mg/L), a loss of up to 90% of the fluorescence is observed. This fluorescence quenching can be explained by the interaction of the polycyclic ring and DNA. Application of the Stern-Volmer treatment (correlation coefficient 0.9) reveals the existence of a quenching process. The study of the interaction by UV-Vis spectrophotometry showed slight shifts (5-10 nm) in the absorption maxima of all compounds together with a decrease in the absorbance. Viscosimetry experiments confirm the association of these molecules with DNA as indicated by the increase (12-36%) of the reduced viscosity of the solutions in the presence of DNA. Equilibrium dialysis studies confirm that all compounds are bound to DNA (5-50%). These results lead to the conclusion that DNA interaction is due mainly to the carbocyclic system rather than to the heterocyclic moiety, suggesting that it takes place through hydrophobic interactions.     

Maximum likelihood estimation for the three-parameter Weibull cdf of strength in presence of concurrent flaw populations

For a correct strength characterization of brittle materials, not only the maximum stress at fracture, but also the geometry of the specimens has to be considered thus taking into account the variable stress state and the size effect. Additionally, fracture may occur due to different fracture modes, as for example surface or edge defects. The authors propose a maximum likelihood estimator to obtain the cumulative distribution functions of strength for surface and edge flaw populations separately, both being three-parameter Weibull cdfs referred to an elemental surface area or elemental edge length, respectively. The method has been applied to simulated 3-point bending test data. The estimated Weibull parameters have been used to compute the cdfs of strength for specimens with different size, providing also the confidence bounds calculated by means of the bootstrap method. Finally, fracture data of 4-point bending tests on silicon carbide have been evaluated with the proposed method.     

Extrusion deactivation of rice bran enzymes by pH modification

Rice bran is considered in Mexico as “waste”, useful only for feeds. As considerable amounts of oil are available in rice bran, it might be worthwhile to stabilize it and extract the edible oil before using it for feedstuffs. Precisely these oils are responsible for rice bran rapid deterioration, particularly in climatic conditions such as those prevalent in Mexico's tropical areas (high humidity and high temperature). This paper deals with the study of the effect of pH during extrusion of fresh rice bran in order to inactivate lipid‐breaking enzymes. Hydrochloric acid or calcium hydroxide, Ca(OH)₂, were added at 0, 1, 5, 10% (dry basis), and moisture content of the bran samples was varied (20, 30, 40%, dry basis) in a 3² factorial design to corroborate its effect at acid and alkaline pH range. Free fatty acids (FFA) increase was the control variable. Extruded samples were stored at room temperature (between 20 and 28 °C) using a non‐extruded sample as control to assess the shelf life effects. Results indicate that in acid‐extruded samples, the increase in FFA concentration after 98 days was much less than in the unmodified‐pH or alkaline samples. The lowest FFA increase after 3 months of storage time was <10 mg FFA/g rice bran using extrusion with no water or chemicals added or using extrusion adding HCl, irrespective of the moisture content of rice bran.     

Towards artificial intelligence at scale in the chemical industry

In the Industry 4.0 era, the chemical industry is embracing broad adoption of artificial intelligence (AI) and machine learning (ML) methods. This article provides a holistic view of how the industry is transforming digitally towards AI at scale. First, a historical perspective on how the industry used AI to aid humans in better decision-making is shown. Then state-of-the-art AI research addressing industrial needs on reliability and safety, process optimization, supply chain, material discovery, and reaction engineering is highlighted. Finally, a vision of the plant of the future is illustrated with critical components of AI-ready culture, model life cycle management, and renewed role of humans in chemical manufacturing.     

Electrical, mechanical, and glass transition behavior of polycarbonate-based nanocomposites with different multi-walled carbon nanotubes

Five commercially available multi-walled carbon nanotubes (MWNTs), with different characteristics, were melt mixed with polycarbonate (PC) in a twin-screw micro compounder to obtain nanocomposites containing 0.25-3.0 wt.% MWNT. The electrical properties of the composites were assessed using bulk electrical conductivity measurements, the mechanical properties of the composites were evaluated using tensile tests and dynamic mechanical analysis (DMA), and the thermal properties of the composites were investigated using differential scanning calorimetry (DSC). Electrical percolation thresholds (p_cs) were observed between 0.28 wt.% and 0.60 wt.%, which are comparable with other well-dispersed melt mixed materials. Based on measurements of diameter and length distributions of unprocessed tubes it was found that nanotubes with high aspect ratios exhibited lower p_cs, although one sample did show higher p_c than expected (based on aspect ratio) which was attributed to poorer dispersion achieved during mixing. The stress-strain behavior of the composites is only slightly altered with CNT addition; however, the strain at break is decreased even at low loadings. DMA tests suggest the formation of a combined polymer-CNT continuous network evidenced by measurable storage moduli at temperatures above the glass transition temperature (T_g), consistent with a mild reinforcement effect. The composites showed lower glass transition temperatures than that of pure PC. Lowering of the height of the tanδ peak from DMA and reductions in the heat capacity change at the glass transition from DSC indicate that MWNTs reduced the amount of polymer material that participates in the glass transition of the composites, consistent with immobilization of polymer at the nanotube interface.     

Update on the pharmacology of Spirulina (Arthrospira), an unconventional food

Spirulina (Arthrospira), a filamentous, unicellular alga, is a cyanobacterium grown in certain countries as food for human and animal consumption. It is also used to derive additives in pharmaceuticals and foods. This alga is a rich source of proteins, vitamins, amino acids, minerals, and other nutrients. Its main use, therefore, is as a food supplement. Over the last few years, however, it has been found to have many additional pharmacological properties. Thus, it has been experimentally proven, in vivo and in vitro that it is effective to treat certain allergies, anemia, cancer, hepatotoxicity, viral and cardiovascular diseases, hyperglycemia, hyperlipidemia, immunodeficiency, and inflammatory processes, among others. Several of these activities are attributed to Spirulina itself or to some of its components including fatty acids omega-3 or omega-6, beta-carotene, alpha-tocopherol, phycocyanin, phenol compounds, and a recently isolated complex, Ca-Spirulan (Ca-SP). This paper aims to update and critically review the results published over the last few years with regards to these properties. The conclusion is that even if this cyanobacterium has been one of the most extensively studied from the chemical, pharmacological and toxicological points of view, it is still necessary to expand the research in order to have more consistent data for its possible use in human beings.     

Carbon,nitrogen and phosphorus recovery from liquid swine wastes: a review

Due to the pollution characteristics of the wastewater generated in piggeries, these waste streams have to be treated before discharging into the environment. These wastes have a high content of organic matter, nitrogen and phosphorus that can be converted or recovered into valuable products. The valuation of swine waste by anaerobic digestion has already been assessed, but no systematic review on the technologies used for recovering nutrients from this waste has been reported to date. Therefore, the present work has the goal of presenting the most studied technologies to different scales of recovery of carbon (i.e. organic matter), nitrogen and phosphorus from swine waste. The main characteristics and parameters of the processes involved in these technologies (mainly air stripping, membrane, enhance biological phosphorus removal and struvite formation) are also highlighted, pointing out its advantages and disadvantages and posing some final feasibility considerations on the subject addressed. Experiments reported in the literature proved that technologies used for nutrient recovery from swine waste are mostly applied to the effluents previously treated by anaerobic digestion as a primary treatment, and greater effort is required for the future implementation of these technologies in large scale. © 2020 Society of Chemical Industry