Orientation Phenomena at Polyurethane Surfaces

The surface energies of soft-segment polyurethanes (SPU) have been evaluated by contact angle measurements. These showed that when solidified in air, the surface energies of the polymers were due almost entirely to dispersion forces. When immersed in liquids including formamide, water and saline solutions, surface rearrangements took place, gradually elevating the non-dispersive surface energy component. Equilibrium values varied with the corresponding non-dispersive surface energy of the contacting liquid. XPS analyses confirmed that compositional variations were responsible for changes in the surface energy. The surface restructuring was shown to affect the bond strengths of SPU/adhesive tape joints. The observations are relevant to property control in this important group of macromolecules.     

EURAMET Project to Examine Underlying Parameters in Radiance Temperature Scale Realization, 156\,^{\circ }\mathrm{C} to 1000\,^{\circ }\mathrm{C}

Over the medium temperature range (from \(156\,^{\circ }\mathrm{C}\) to \(1000\,^{\circ }\mathrm{C}\) ), radiation thermometry is usually established within a national metrology institute (NMI) by means of variable temperature blackbody radiation sources, whose temperature is determined using a platinum resistance thermometer or thermocouple, calibrated in terms of the International Temperature Scale of 1990 (ITS-90), positioned in close proximity to the back radiating surface of the blackbody. It is also reasonably common to establish a scale using a suitable radiation thermometer, such as an indium gallium arsenide (InGaAs) detector-based narrow band radiation thermometer, calibrated using a number of fixed-point blackbody sources from the indium (In) to silver (Ag) (or copper (Cu)) points, with the calibration results fitted using a parameterized Planckian interpolation function. During 2007 and 2008, two InGaAs-based radiation thermometers were circulated around seven NMIs within the European Association of National Metrology Institutes (EURAMET) region in order to undertake a comparison of parameters necessary for radiation thermometry over the medium temperature range. Measurements were made of the size-of-source effect and gain (range) ratios of the two thermometers along with an assessment of the effect of changes in the ambient temperature and humidity on the thermometer output. The thermometers were also calibrated using fixed-point and/or variable temperature blackbody sources at each institute. A brief overview of the results obtained by this project is presented in this paper.     

Structural Defects Control the Energy Level Alignment at Organic/Organic Interfaces

The dependence of the energy level alignment (ELA) on structural defects at an organic/organic heterojunction (OOH) of perfluoropentacene (PFP)‐on‐diindenoperylene (DIP) was investigated using X‐ray scattering and ultraviolet photoelectron spectroscopy. The density of structural defects near the interface between the PFP and DIP layers was varied by changing the growth temperature of the DIP film. A direct relationship was found between the defect density and the ELA at the OOH; the ELA together with the change in the electrostatic potential (quasi‐interface dipole layer) at the OOH varies systematically with the defect density near the interface. This indicates that a key factor affecting the ELA is the electrostatic potential change across the OOH interface, which is produced by electron transfer from DIP occupied gap states to PFP unoccupied gap states. These gap states originate from the defects and are effectively controlled by adjusting the growth conditions of the organic films. As a result, the ELA at OOH interfaces can be controlled by the density of structural defect, which is important for organic devices employing OOHs, such as organic photovoltaic cells.     

Electromagnetism as a means for understanding materials mechanics phenomena in magnetic materials

Electromagnetic properties are an interesting means for monitoring a variety of materials' mechanical properties in ferro‐ and paramagnetic materials non‐destructively. Those properties include uni‐ und multi‐axial stress states as well as plasticity and fatigue damage and can be measured at macro‐ as well as at microscopic scales, depending on what measurement equipment will be used. The article describes the general electromagnetic phenomena to be considered as well as the equipment to be used before presenting a variety of different experimental results from which the materials mechanical properties mentioned above can be directly derived being an ideal means for monitoring the health of any magnetic metallic structure.     

Activation of nuclear factor kappa B inflammatory bowel disease

Nonhomologous DNA end joining (NHEJ) is the major pathway for repairing double-strand DNA breaks. V(D)J recombination is a double-strand DNA breakage and rejoining process that relies on NHEJ for the joining steps. Here we show that the targeted disruption of both DNA ligase IV alleles in a human pre-B cell line renders the cells sensitive to ionizing radiation and ablates V(D)J recombination. This phenotype can only be reversed by complementation with DNA ligase IV but not by expression of either of the remaining two ligases, DNA ligase I or III. Hence, DNA ligase IV is the activity responsible for the ligation step in NHEJ and in V(D)J recombination.     

Properties of high-Tc wires made by the metallic precursor process

The metallic precursor process, used in the production of high-temperature superconducting ceramics, exploits the relatively high formability of the metallic state to fabricate multifilament wires with excellent transport and mechanical properties. Multifilament wires, containing 9,583 filaments, exceed by tenfold the filament counts achieved by any other process. Oxide critical current densities of 17.7 kA/cm² at 77 K in self-field surpass the best electrical performance reported for any other process used to fabricate multifilament composite wires. The mechanical properties of these wires approach the behavior of ideal composites, resulting in the flexibility, durability, and strain tolerance required for large-scale use in power generation, distribution, and end-use applications such as motors and current limiters.     

Prospective, randomized trial of prolonged intracoronary urokinase infusion for chronic total occlusions in native coronary arteries

OBJECTIVES: The purpose of this study was to determine the safety and efficacy of three dosing regimens of intracoronary urokinase for facilitated angioplasty of chronic total native coronary artery occlusions. BACKGROUND: Percutaneous transluminal coronary angioplasty of chronically occluded (>3 months) native coronary arteries is associated with low initial success secondary to an inability to pass the guide wire beyond the occlusion. METHODS: Patients were enrolled if a chronic total occlusion >3 months old could not be crossed with standard angioplasty equipment. Of the 101 patients enrolled, 41 had successful guide wire passage and were excluded from urokinase treatment. The remaining 60 patients were randomized to receive one of three intracoronary dosing regimens of urokinase over 8 h (group A = 0.8 million U; group B = 1.6 million U; group C = 3.2 million U), and angioplasty was again attempted after completion of the urokinase infusion in 58 patients. RESULTS: Coronary angioplasty was successful in 32 patients (53%) (group A 52%, group B 50%, group C 59%, p = 0.86). This study had a 90% power to detect at least a 50% difference between dosing groups at alpha 0.05. Bleeding complications requiring blood transfusion did not differ significantly among the dosing groups (A 0%, B 15%, C 6%, p = 0.14), although major bleeding episodes were less common in group A (p < 0.05). There were no major procedural or in-hospital complications. Angiographic follow-up in 69% of the patients with successful angioplasty revealed target vessel patency in 91% but an angiographic restenosis rate of 59%. CONCLUSIONS: A prolonged supraselective intracoronary infusion of urokinase can be safely administered and may facilitate angioplasty of chronic total occlusions. Lower doses of urokinase are equally effective and result in fewer bleeding complications than do higher dosage regimens. Vessel patency is frequently maintained, but restenosis remains a problem.     

Computational implementation of a systems prioritization methodology for the Waste Isolation Pilot Plant: a preliminary example

A systems prioritization methodology (SPM) is under development for the Waste Isolation Pilot Plant (WIPP). The SPM is based on a large numerical integration problem that must be repeatedly evaluated to determine compliance probabilities associated with different experimental programs and design modifications. Due to the complexity and computational cost of the underlying integration problem, the implementation of the SPM must be planned very carefully. This presentation describes a preliminary application of the SPM, designated SPM-l, performed to provide insights to facilitate the development and implementation of the methodology. Topics illustrated by SPM-1 include definition of probability spaces on which the SPM is based, use of Latin hypercube sampling and simple random sampling to integrate over different probability spaces, selection of mechanistic calculations to be performed, efficient use of the limited number of mechanistic calculations that can be performed, and assembly of many individual calculations into a complete analysis.