Stresses Analysis on a Rail Part

The EFVM （Vitoria Minas Railroad） is one of the main railways in Brazil. It transports freight trains of ore, 220 wagons each. These wagons have 2 boogies of 2 axles each and 32 metric tons on metre gauge. Elastic strains were measured on a special part of this railway due to these trains. The main load to evaluate stresses and strains was a G 16 Locomotive, a C-C kind from Vale, a Brazilian Company. The measurements were obtained by dynamic deflectometer installed on a main line of this railway, near Ipatinga, a city from Minas Gerais, one of Brazil states. This track was equipped to obtain stresses under an equal repeated static load A simulation of the stresses was made under critical strain by Ferrovia 1.0 software. It was also made an evaluation of unequal results from neighbor sleepers taking in comparison two equipped parts of this railway, one with compacted ballast and no compaction to the other. The results were strain limited, avoiding breakage or damage to the studied rails. This work analyses these measurements focusing on the improvement of track quality.     

Metabolic versatility in full-scale wastewater treatment plants performing enhanced biological phosphorus removal

This study analysed the enhanced biological phosphorus removal (EBPR) microbial community and metabolic performance of five full-scale EBPR systems by using fluorescence in situ hybridisation combined with off-line batch tests fed with acetate under anaerobic–aerobic conditions. The phosphorus accumulating organisms (PAOs) in all systems were stable and showed little variability between each plant, while glycogen accumulating organisms (GAOs) were present in two of the plants. The metabolic activity of each sludge showed the frequent involvement of the anaerobic tricarboxylic acid cycle (TCA) in PAO metabolism for the anaerobic generation of reducing equivalents, in addition to the more frequently reported glycolysis pathway. Metabolic variability in the use of the two pathways was also observed, between different systems and in the same system over time. The metabolic dynamics was linked to the availability of glycogen, where a higher utilisation of the glycolysis pathway was observed in the two systems employing side-stream hydrolysis, and the TCA cycle was more active in the A²O systems. Full-scale plants that showed higher glycolysis activity also exhibited superior P removal performance, suggesting that promotion of the glycolysis pathway over the TCA cycle could be beneficial towards the optimisation of EBPR systems.     

Comparison of methanol/hydrochloric,ferric chloride acid versus tribochemical silica coating for adhesion of resin cement to zirconium dioxide

This study compared air-abrasion and etching regimens on adhesion of resin luting agent to zirconium dioxide. Ceramic specimens (LAVA, 3 M ESPE) (N = 16) were embedded in acrylic resin and exposed surfaces were polished. The specimens were randomly assigned into four groups (n = 12, 3 specimens for each disc): SC: Air-borne particle abrasion (30 μm aluminum oxide particles coated with silica, CoJet, 3 M ESPE); MH: Heated chemical solution (Methanol-800 mL; 37% Hydrochloric Acid-200 mL; Ferric Chloride-2 g) at 100 °C for 30 min, MHP: Primer (Metal/Zirconia Primer, Ivoclar Vivadent) + MH, P: Primer only (Metal/Zirconia Primer). Cylindrical molds (internal diameter: 0.7 mm; height: 1.5 mm) were placed on each conditioned specimen, filled with resin cement (Multilink Automix) and photo-polymerized for 60 s. After 24 h, the molds were removed and the specimens were stored in distilled water at 37 °C for six months). Microshear test was performed in a Universal Testing Machine (1 mm/min). Failures types were classified as adhesive, mixed, or cohesive. In another set of specimens (n = 2 per group) contact angle measurements were recorded. Data were analyzed statistically using Kruskal–Wallis and Dunn’s tests (α = 0.05). The surface conditioning method significantly affected the mean bond strength (MPa) (p < 0.0001): SC(18.3 ± 0.3)^a < P(5.00 ± 0.07)^b < MHP(4.7 ± 0.08)^c < MH(0.84 ± 0.01)^c. While Group SC showed mainly adhesive (58%) and mixed (41.7%) failure types, groups MH, MHP, and P presented exclusively adhesive failures. SC, MHP, and P (29–32°) showed lower contact angle than MH (78.9°). Volume loss was the highest with MHP (9.92 μl) followed by SC (9.67 μl).     

Low‐cost,environmentally friendly route to produce glass fiber‐reinforced polymer composites with microfibrillated cellulose interphase

In this article, an easy, effective, and eco‐friendly method to improve the mechanical performance of glass fiber‐reinforced polymer composites is proposed, which involves the coating of unsized glass fiber fabric layers by simple immersion in an aqueous suspension containing sugarcane bagasse microfibrillated cellulose (MFC), followed by vacuum‐assisted liquid resin infusion as the processing method. From atomic force microscopy, a 250 nm MFC‐rich interphase was found, revealing its ability to build micro‐ and nanobridges acting as bulk epoxy matrix and GF linker. The interlaminar shear strength, quasi‐static tensile, and flexural tests, as well as the morphological and fractographic inspection of test coupons containing the secondary substructure, broadly supported the assumption of the efficient role on the interfacial level of this nano reinforcement by enhancing the load transference and distribution from the polymer matrix to the main reinforcing fiber system compared to baseline unsized fiber‐reinforced epoxy laminates. This finding permits this class of composite materials to be considered as having great potential to achieve products with excellent performance/cost ratios. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44183.     

Maternal Flaxseed Oil During Lactation Enhances Bone Development in Male Rat Pups

Flaxseed oil is an alpha linolenic acid source important in the growth and body development stage; furthermore, this acid acts on adipose tissue and bone health. The aim of this study was to evaluate body composition, fatty acid composition, hormone profile, retroperitoneal adipocyte area and femur structure of pups at weaning, whose mothers were fed a diet containing flaxseed oil during lactation. After birth, pups were randomly assigned: control (C, n = 12) and flaxseed oil (FO, n = 12), rats whose mothers were treated with diet containing soybean or flaxseed oil. At 21 days, the pups were weaned and body mass, length, body composition, biochemical parameter, leptin, osteoprotegerin, osteocalcin, fatty acids composition, intra‐abdominal fat mass and femur structure were analyzed. FO showed (p < 0.05): higher body mass (+12 %) and length (+9 %); body fat mass (g, +45 %); bone mineral density (+8 %), bone mineral content (+55 %) and bone area (+35 %), osteocalcin (+173 %) and osteoprotegerin (+183 %). Arachidonic acid was lower (p < 0.0001), alpha‐linolenic and eicosapentaenoic were higher (p < 0.0001). Intra‐abdominal fat mass was higher (+25 %), however, the retroperitoneal adipocytes area was lower (?44 %). Femur mass (+10 %), distance between epiphyses (+4 %) and bone mineral density (+13 %) were higher. The study demonstrates that adequate flaxseed oil content during a lactation diet plays an important role in the development of pups.     

trans Fatty Acids in Colostrum,Mature Milk and Diet of Lactating Adolescents

The purpose of this study was to investigate the trans fatty acids (TFA) content and distribution in colostrum, mature milk, and diet of adolescent mothers, after TFA declaration in food labels became mandatory in Brazil. Participants were healthy adolescents (n 54, 15–19 years, 1–90 days postpartum) practicing exclusive breastfeeding. Milk samples were collected 3 days after delivery (colostrum) and in the third month postpartum (mature milk) by hand expression. The fatty acid composition of the milk samples was determined by gas chromatography. TFA intake corresponded to 1.23 % of total energy value. Total 18:2 TFA accounted for less than 0.5 % of the energy intake. The amount of total 18:1 TFA (mean ± SEM) was 1.9 % ± 0.14 in colostrum and 1.5 % ± 0.2 in mature milk. The total content of n‐3 PUFA was inversely correlated with the total content of 18:1 TFA in colostrum. Both in colostrum and in mature milk, vaccenic acid (11t‐18:1) was found to be the most abundant 18:1 trans isomer, followed by elaidic acid (9t‐18:1), whereas rumenic acid (9c,11t‐18:2 CLA) was the predominant 18:2 trans isomer. In conclusion, the levels of TFA of industrial sources found in the mother's diet and breast milk (colostrum and mature milk) showed a decrease in relation to those observed in studies conducted prior to the TFA labeling resolution in Brazil. However, the current low intake levels of n‐3 LCPUFA and DHA content in the milk of lactating adolescents may be insufficient for supporting adequate neurological development of the infants.     

Solid Tumors and Kinase Inhibition: Management and Therapy Efficacy Evolution

The increasing numbers of cancer cases worldwide and the exceedingly high mortality rates of some tumor subtypes raise the question about if the current protocols for cancer management are effective and what has been done to improve upon oncologic patients’ prognoses. The traditional chemo-immunotherapy options for cancer treatment focus on the use of cytotoxic agents that are able to overcome neoplastic clones’ survival mechanisms and induce apoptosis, as well as on the ability to capacitate the host’s immune system to hinder the continuous growth of malignant cells. The need to avert the highly toxic profiles of conventional chemo-immunotherapy and to overcome the emerging cases of tumor multidrug resistance has fueled a growing interest in the field of precision medicine and targeted molecular therapies in the last couple of decades, although relatively new alternatives in oncologic practices, the increased specificity, and the positive clinical outcomes achieved through targeted molecular therapies have already consolidated them as promising prospects for the future of cancer management. In recent years, the development and application of targeted drugs as tyrosine kinase inhibitors have enabled cancer treatment to enter the era of specificity. In addition, the combined use of targeted therapy, immunotherapy, and traditional chemotherapy has innovated the standard treatment for many malignancies, bringing new light to patients with recurrent tumors. This article comprises a series of clinical trials that, in the past 5 years, utilized kinase inhibitors (KIs) as a monotherapy or in combination with other cytotoxic agents to treat patients afflicted with solid tumors. The results, with varying degrees of efficacy, are reported.     

Plasma Metabolomics Profile of “Insulin Sensitive” Male Hypogonadism after Testosterone Replacement Therapy

Male hypogonadism is a disorder characterized by low levels of testosterone, but patients can either show normal insulin (insulin-sensitive (IS)) or over time they can become insulin-resistant (IR). Since the two groups showed different altered metabolisms, testosterone replacement therapy (TRT) could achieve different results. In this paper, we analyzed plasma from 20 IS patients with low testosterone (<8 nmol/L) and HOMAi < 2.5. The samples, pre- and post-treatment with testosterone for 60 days, were analyzed by UHPLC and mass spectrometry. Glycolysis was significantly upregulated, suggesting an improved glucose utilization. Conversely, the pentose phosphate pathway was reduced, while the Krebs cycle was not used. Branched amino acids and carnosine metabolism were positively influenced, while β-oxidation of fatty acids (FFA) was not activated. Cholesterol, HDL, and lipid metabolism did not show any improvements at 60 days but did so later in the experimental period. Finally, both malate and glycerol shuttle were reduced. As a result, both NADH and ATP were significantly lower. Interestingly, a significant production of lactate was observed, which induced the activation of the Cori cycle between the liver and muscles, which became the main source of energy for these patients without involving alanine. Thus, the treatment must be integrated with chemicals which are not restored in order to reactivate energy production.     

In situ compatibilization of a polyethylene,polypropylene, and polystyrene ternary blend through Friedel–Crafts alkylation

The Friedel–Crafts alkylation reaction has been applied to reactively compatibilize a ternary blend of high-density polyethylene (HDPE), polypropylene (PP), and polystyrene (PS). The reactions were carried out in an internal mixer using varying catalyst concentrations. The resulting compatibilizer was quantified after Soxhlet extraction. In addition, p-substitution due to the grafting of alkyl groups onto the PS benzene ring was identified via nuclear magnetic resonance spectroscopy. The size of the PS domain in the reactive compositions is decreased by 80%. Moreover, the phase in which PS droplets were dispersed varied, that is, in the nonreactive blends they were found in the PP phase and in the reactive blends they shifted toward the HDPE phase. The effect of the compatibilizing agent was to improve the mechanical properties of the blend. Even with the lowest catalyst content, the properties of elongation-at-break, tensile strength, toughness, and elastic modulus showed improvements. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48295.     

Resistance variation of conductive ink applied by the screen printing technique on different substrates

This research study focuses on the application of conductive ink by the screen printing technique to evaluate the potential of creating printed electrodes and to investigate the effect of washing upon electrical resistance and flexibility. Two conductive inks were applied by a conventional screen printing method on four different textile substrates, 100% cotton, 50%/50% cotton/polyester, 100% polyester and 100% polyamide. The inks were also applied on a multifibre fabric. Atmospheric plasma treatment was applied to improve the adhesion to the samples, and the resistance values were compared with those of non‐treated samples. The values were measured before and after cleaning and washing tests, which were performed to simulate domestic treatment for garments to predict the behaviour of the inks after normal usage of the fabrics. Comfort properties like stiffness of the fabrics were also evaluated after five and 10 washing cycles. It was observed that PE 825 ink forms a thicker film on the fabric surface, contributing to the loss of flexibility of the textile. However, PE 825 ink also produced the best results in terms of durability and lower values of resistance. Polyamide fabrics lost their conductive property after five washing cycles due to weak bonding between the ink and the fibres, whereas cotton fibres provided the best results.