Clinical presentation of HIV infection in patients aged 50 years or older

A case of metachronous malignancy in an elderly postmenopausal lady is presented. She had previously been successfully treated for squamous cell carcinoma of the cervix and now four years later, presented with a right lower lobe lung abscess. On evaluation she was found to have a small cell carcinoma of the lung involving the right intermediate and right lower lobe bronchus. She improved clinically and radiologically with parenteral antibiotics, combination chemotherapy and local external radiotherapy.     

Multimodal mass transfer in solid-oxide fuel-cells

A new model and algorithm for the numerical simulation of multicomponent mass-transfer in solid-oxide fuel-cells (SOFCs) is presented. The model does not neglect any of the possible molecular mass-transfer mechanisms present in a SOFC. It takes into account convection and molecular-diffusion phenomena in the channels, and convection, molecular diffusion and Knudsen diffusion in the porous electrodes. The model does not require any of the constraining hypotheses present in previously published ones. Its noteworthy features are: (i) pressure is not considered as constant (in any direction) in the channel or in the electrode; (ii) global mass transfer through the porous media is modeled by means of the Dusty Gas Model, without any limiting assumption on the number of species in the multicomponent gas mixture; (iii) the physical phenomena in channel and porous medium are coupled through boundary conditions and solved simultaneously; (iv) the model can be used for both the anode and the cathode. The algorithm is designed to simulate multidimensional domains and is applicable to both planar and tubular cells. It has been implemented using OpenFOAM (open field operation and manipulation), an open-source finite-volume-method based CFD-tool. The model performance has been successfully validated by comparison with experimental data reported in the literature for both main types of SOFC, planar and tubular.     

Characterization of Soybean Proteins–Fatty Acid Systems

This study investigated, with the aim of obtaining more flexible and hydrophobic proteins, the attachment of a low chain fatty acid, decanoic acid, to alkaline and acid soybean proteins; and the effect on their conformational and functional properties. The extent of esterification was high at acid pH and also increased with heating. Protein solubility decreased, mainly at the highest temperature (60 °C). Increasing levels of fatty acid formed a complex with a slightly more soluble protein with less surface hydrophobicity. Esterified proteins exhibited aggregation/dissociation and were stabilized by different protein subunits belonging to 7S and 11S globulins. Denaturation of these soybean protein fractions (7S and 11S) were also detected in these complexes. The highest level of fatty acids favored formation of a more ordered protein structure.     

Novel diol spiro orthocarbonates derived from glycerol as anti‐shrinkage additives for the cationic photopolymerization of epoxy monomers

Shrinkage that takes place during polymerizations induces internal stress in polymeric materials generating a series of problems like poor adhesion to substrates and delamination in coatings or microcracks and microvoids in composites. Some additives like spiro orthocarbonates can reduce or eliminate this shrinkage. This paper deals with the synthesis of novel diol spiro orthocarbonates (DIOL SOCs) and their effect as anti‐shrinkage additives in the photopolymerization of the monomer 3,4‐epoxycyclohexyl‐3′, 4′‐epoxycyclohexanecarboxylate. It was found that increasing the concentration of the DIOL SOCs resulted in higher conversion of the monomer due to the presence of hydroxyl groups. The viscoelastic properties of the polymer products were also measured. It was observed that at 5 mol% of the mixture of DIOL SOCs there was an increase in the storage modulus due to the crosslinking produced by the bifunctional SOCs. However, at higher concentrations, a decrease in the storage modulus was observed. The level of shrinkage using the DIOL SOCs at 20 mol% was reduced by 45% when compared to the case without any additive. DIOL SOCs can be easily prepared by reacting glycerol with tetraethylorthocarbonate. These additives reduced significantly the level of shrinkage of the polyether derived from the diepoxycyclohexane monomer. Copyright © 2010 Society of Chemical Industry     

The effect of montmorillonite and compatibilizer quantities on stiffness and toughness of polyamide nanoblends

Although polymer blend nanocomposites are widely studied, the balance between stiffness and toughness has not yet been investigated in detail. Some materials producers as well as some sectors in the automotive industry try to improve the toughness of materials without an important loss in stiffness. With this in mind, the aim of the study reported here was to obtain a good balance between toughness and stiffness of polymer blends with different amounts of clay and compatibilizer. In this context, the microstructure of polyamide 6/ethylene–propylene–diene metallocene terpolymer/(ethylene–propylene–diene copolymer)‐graft‐(maleic anhydride) blends with various amounts of clay (2, 3, 4 and 5 wt%) and compatibilizer (10 and 20 wt%) was studied to analyse the achieved morphology to understand the macroscopic properties. The morphology of the rubber phase and the dispersion of the montmorillonite (MMT) are the main factors that influence the mechanical properties. In this sense, the highest Young's modulus is achieved for nanoblends with 5 wt% of MMT, although this nanoblend has the lowest value of notched Izod impact strength. The results obtained suggest that there is a clear trade‐off between stiffness, toughness and temperature behaviour when the ratio of (ethylene–propylene–diene copolymer)‐graft‐(maleic anhydride) to MMT is 5:1. Copyright © 2009 Society of Chemical Industry     

Effect of temperature on structural properties of Aloe vera (Aloe barbadensis Miller) gel and Weibull distribution for modelling drying process

Aloe vera (Aloe barbadensis Miller) gel was dried at five inlet temperatures 50, 60, 70, 80 and 90 °C, in a convective dryer with a constant air flow of 2.0 ± 0.2 m/s. Rehydration ratio, water holding capacity, texture, microstructure and total polysaccharide content were evaluated. Drying kinetics was estimated using the Weibull distribution (r² > 0.97 and Chi-square < 0.0009). Values of scale and shape parameters ranged from 90.94 to 341.06 (min) and 1.43 to 1.49, respectively. Furthermore, the influence of temperature on the model parameters as well as on the quality attributes was analysed using a least significant difference test (p-value < 0.05). These effects were more evident for the long drying period (e.g. 810 min at 50 °C). However, minor alterations in the structural properties and total polysaccharide content were produced at drying temperatures of 60–70 °C, resulting in a high quality gel.     

Oxidative and photochemical processes for the removal of galaxolide and tonalide from wastewater

Synthetic musks have been reported in wastewaters at concentrations as high as tens of micrograms per litre. The two most significant polycyclic musk fragrance compounds are 1,3,4,6,7,8-hexahydro-4,6,6,7,8,8-hexamethylcyclopenta(g)-2-benzopyran (HHCB, trade name galaxolide^®) and 7-acetyl-1,1,3,4,4,6-hexamethyltetrahydronaphthalene (AHTN, trade name tonalide^®). We report the result of several irradiation and advanced oxidation processes carried out on samples of the effluent of a wastewater treatment plant located in Alcalá de Henares, Madrid. Wastewater samples were pre-ozonated and spiked with 500 ng/L of tonalide or galaxolide in order to obtain final concentrations in the same order as the raw effluent. The treatments assayed were ozonation with and without the addition of hydrogen peroxide (O₃, O₃/H₂O₂), ultraviolet (254 nm low pressure mercury lamp) and xenon-arc visible light irradiation alone and in combination with ozone (UV, O₃/UV, Xe, O₃/Xe) and visible light photocatalytic oxidation using a Ce-doped titanium dioxide photocatalyst performed under continuous oxygen or ozone gas bubbling (O₂/Xe/Ce-TiO₂, O₃/Xe/Ce-TiO₂). In all cases, samples taken at different contact times up to 15 min were analyzed. An analytical method based on stir bar sorptive extraction (SBSE), followed by comprehensive two-dimensional gas chromatography (SBSE-GC × GC-TOF-MS), was used for the automatic searching and evaluation of the synthetic musks and other nonpolar or semipolar contaminants in the wastewater samples. In all cases tonalide was more easily removed than galaxolide. The best results for the latter (more than 75% removal after 5 min on stream) were obtained from ozonation (O₃) and visible light photocatalytic ozonation (O₃/Xe/Ce-TiO₂). A significant removal of both pollutants (∼60% after 15 min) was also obtained during visible light photocatalysis (O₂/Xe/Ce-TiO₂). UV radiation was able to deplete tonalide (+90%) after 15 min but only reduced the concentration of galaxolide to about half of its initial concentration. The toxicity of treated samples decreased for O₃/UV and O₃/Ce-TiO₂, but increased during irradiation processes UV, Xe and Xe/Ce-TiO₂. Ozone treatments tend to decrease toxicity up to a certain dosage, from which point the presence of toxic transformation products has adverse effects on aquatic microorganisms.     

Bladder pseudotumor in childhood

The application of frozen and radiation sterilized allogenic bone grafts for reconstructions in orthopaedic operations is described. Analysis of results of treatment of 1125 patients was performed. It was found that use of preserved bone allows to reduce the extend and duration of surgery. Nearly total substitution of grafts may be seen in 3 to 8 months after surgery.