Rare earth ions and Ge nanocrystals in SiO(2)

Experimental studies of Ge nanocrystals embedded in SiO(2) films doped with Er and Yb deposited by rf-magnetron sputtering are presented. Although inter-band photoluminescence (PL) from the Ge nanocrystals is not observed, it is nevertheless found that the presence of Ge nanocrystals is crucial for obtaining light emission from Er(3+) and Yb(3+). For both kinds of rare earth ions, the intensity of the related PL line has a maximum after heat treatment at 800?°C, and the PL excitation spectra for the two cases are very similar. This suggests that the presence and the structure of the nanocrystals are important for the efficiency of PL from Er(3+) and Yb(3+). Experiments performed with multilayer structures of Ge nanocrystals and SiO(2) show that the optically active rare earth ions are located in the SiO(2) layers, and not inside the Ge nanocrystals. The mechanism of energy transfer from Ge nanocrystals to the rare earth ions is found to be non-optical.     

Micro structuration of gaas surface by wet etching: towards a specific surface behavior

Resonant microelectromechanical systems are promising devices for real time and highly sensitive measurements. The sensitivity of such sensors to additional mass loadings which can be increased thanks to the miniaturisation of devices is of prime importance for biological applications. The miniaturisation of structures passes through a photolithographic process and wet chemical etching. So, this paper presents new results on the anisotropic chemical etching of the gallium arsenide (GaAs) crystal used for this application, in several solutions. This paper focuses on the micro/nanostructuration of the sensing surface to increase the sensor sensitivity. Indeed, this active surface will be biofunctionalized to operate in biological liquid media in view of biomolecules detection. Several experimental conditions of etching bath composition, concentration and temperature were examined to obtain a large variety of geometrical surfaces topographies and roughness. According to the orientation dependence of the chemical etching process, the experiments were also performed on various GaAs crystal plates. The bath 1 H3PO4:9 H2O2:1 H2O appeared to be particularly adapted to the fabrication of the GaAs microstructured membrane: indeed, the bath is highly stable, anisotropic, and, as a function of temperature, it allows the production of a large variety of GaAs surface topographies.     

Polydopamine as an intermediate layer for silver and hydroxyapatite immobilisation on metallic biomaterials surface

Hydroxyapatite (HA) coated implant is more susceptible to bacterial infection as the micro-structure surface which is beneficial for osseointegration, could also become a reservoir for bacterial colonisation. The aim of this study was to introduce the antibacterial effect of silver (Ag) to the biomineralised HA by utilising a polydopamine film as an intermediate layer for Ag and HA immobilisation. Sufficient catechol groups in polydopamine were required to bind chemically stainless steel 316 L, Ag and HA elements. Different amounts of Ag nanoparticles were metallised on the polydopamine grafted stainless steel by varying the immersion time in silver nitrate solution from 12 to 24 h. Another polydopamine layer was then formed on the metallised film, followed by surface biomineralisation in 1.5 Simulated Body Fluid (SBF) solution for 3 days. Several characterisation techniques including X-Ray Photoelectron Spectroscopy, Atomic Force Microscopy, Scanning Electron Microscopy and Contact Angle showed that Ag nanoparticles and HA agglomerations were successfully immobilised on the polydopamine film through an element reduction process. The Ag metallisation at 24 h has killed the viable bacteria with 97.88% of bactericidal ratio. The Ag was ionised up to 7 days which is crucial to prevent bacterial infection during the first stage of implant restoration. The aged functionalised films were considered stable due to less alteration of its chemical composition, surface roughness and wettability properties. The ability of the functionalised film to coat complex and micro scale metal make it suitable for dental and orthopaedic implants application.     

Spark plasma sintering of double-walled carbon nanotubes

Bulk samples of double-walled carbon nanotubes are prepared for the first time. The best spark plasma sintering conditions are (1100 °C, 100 MPa). Raman spectroscopy and scanning electron microscopy show that the nanotubes are undamaged. The density is equal to 1.29 g cm⁻³ and the pores are all below 6 nm in diameter. The electrical conductivity is equal to 1650 S cm⁻¹. The transverse fracture strength is equal to 47 MPa.     

Modification of Tribological Properties of Silicon by Boron Ion Implantation

Friction and wear properties of silicon used in the fabrication of microelectromechanical systems (MEMS) are important for their long-term reliability. In the present study, the authors have implanted single-crystal and polycrystalline silicon wafers with boron ions to improve their mechanical and tribological properties. The authors have studied the effects of ion implantation on the crystallinity, microstructure, nanohardness, and friction and wear properties and have found that silicon remains crystalline after ion bombardment at doses up to 2 × 10¹⁷ ions.cm^?2 but with a large amount of defects. The ion bombardment modifies elastic/plastic deformation characteristics and crack nucleation that occurs during indentation. There is a minor increase, ? 10-15 percent, in the nanohardness as a result of boron-ion implantation. Ion bombarded single-crystal silicon exhibits very low friction (0.05) and low wear factor (10^?6 mm³·N^?1m^?1) while slid against a 52100 steel ball. The coefficient of friction of bombarded silicon in dry air and dry nitrogen is even lower.     

Bilayer Forming Phospholipids as Targets for Cancer Therapy

Phospholipids represent a crucial component for the structure of cell membranes. Phosphatidylcholine and phosphatidylethanolamine are two phospholipids that comprise the majority of cell membranes. De novo biosynthesis of phosphatidylcholine and phosphatidylethanolamine occurs via the Kennedy pathway, and perturbations in the regulation of this pathway are linked to a variety of human diseases, including cancer. Altered phosphatidylcholine and phosphatidylethanolamine membrane content, phospholipid metabolite levels, and fatty acid profiles are frequently identified as hallmarks of cancer development and progression. This review summarizes the research on how phospholipid metabolism changes over oncogenic transformation, and how phospholipid profiling can differentiate between human cancer and healthy tissues, with a focus on colorectal cancer, breast cancer, and non-small cell lung cancer. The potential for phospholipids to serve as biomarkers for diagnostics, or as anticancer therapy targets, is also discussed.     

Concreteness training reduces dysphoria: Proof-of-principle for repeated cognitive bias modification in depression.

A tendency toward abstract and overgeneral processing is a cognitive bias hypothesized to causally contribute to symptoms of depression. This hypothesis predicts that training dysphoric individuals to become more concrete and specific in their thinking would reduce depressive symptoms. To test this prediction, 60 participants with dysphoria were randomly allocated either to (a) concreteness training; (b) bogus concreteness training, matched with concreteness training for treatment rationale, experimenter contact, and treatment duration but without active engagement in concrete thinking; (c) a waiting-list, no training control. Concreteness training resulted in significantly greater decreases in depressive symptoms and significantly greater increases in concrete thinking than the waiting-list and the bogus training control, and significantly greater decreases in rumination than the waiting-list control. These findings suggest that concreteness training has potential as a guided self-help intervention for mild-to-moderate depressive symptoms. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Characterization of multilayer anti-fog coatings

Fog formation on transparent substrates constitutes a major challenge in several optical applications requiring excellent light transmission characteristics. Anti-fog coatings are hydrophilic, enabling water to spread uniformly on the surface rather than form dispersed droplets. Despite the development of several anti-fog coating strategies, the long-term stability, adherence to the underlying substrate, and resistance to cleaning procedures are not yet optimal. We report on a polymer-based anti-fog coating covalently grafted onto glass surfaces by means of a multistep process. Glass substrates were first activated by plasma functionalization to provide amino groups on the surface, resulting in the subsequent covalent bonding of the polymeric layers. The anti-fog coating was then created by the successive spin coating of (poly(ethylene-maleic anhydride) (PEMA) and poly(vinyl alcohol) (PVA) layers. PEMA acted as an interface by covalently reacting with both the glass surface amino functionalities and the PVA hydroxyl groups, while PVA added the necessary surface hydrophilicity to provide anti-fog properties. Each step of the procedure was monitored by XPS, which confirmed the successful grafting of the coating. Coating thickness was evaluated by profilometry, nanoindentation, and UV visible light transmission. The hydrophilic nature of the anti-fog coating was assessed by water contact angle (CA), and its anti-fog efficiency was determined visually and tested quantitatively for the first time using an ASTM standard protocol. Results show that the PEMA/PVA coating not only delayed the initial period required for fog formation but also decreased the rate of light transmission decay. Finally, following a 24 hour immersion in water, these PEMA/PVA coatings remained stable and preserved their anti-fog properties.     

Convergences among psychoanalytic and cognitive-behavioral theories of depression.

Discusses 2 types of depression based on disruptions of (1) interpersonal relatedness or (2) self-esteem, and considers the nature, etiology, and treatment of depression based on the phenomenology of the issues that cause individuals to become depressed. The interpersonal perspective of S. Arieti and J. Bemporad (1980), the object relations perspective of J. Bowlby (see record 1988-16459-001), and the psychoanalytic ego psychology and cognitive developmental theory perspective of S. J. Blatt (1992) are compared and contrasted with each other and with the cognitive-behavioral perspective of A. T. Beck (1983). Areas of agreement and differences among these 4 theoretical positions are discussed in terms of their implications for treatment. (PsycINFO Database Record (c) 2010 APA, all rights reserved)