A lubrication theory for fluids with microstructure

Experimental observations indicate that viscosity of fluids adjacent to solid surfaces is altered as compared to bulk viscosity measured away from the surfaces. It is well-established that in thin films of less than several molecules thick, the classical Reynolds theory of lubrication breaks down and there is at present no microscopic model for the flow behavior of a collection of molecules near a solid wall. In this paper, a nonlocal lubrication theory of fluids with microstructure is presented to provide a basic theory for calculatin the rate at which a thin film of liquid drains from between two molecularly smooth, solid surfaces as they are forced together. The viscosity moduli, proposed by the theory are in excellent agreement with experiments for all film thicknesses down to zero. Exact solutions are obtained for drainage curves and for the spread of thin films on a rotating surface. Theoretical calculations are in perfect agreement with several experimental observations.     

Fast fault simulation for nonlinear analog circuits

A new method of transient fault simulation uses dc bias grouping of faulty circuits and decreases the number of Newton-Raphson iterations needed to reach a solution. An experimental tool implementing this method achieves a speedup of 20% to 30% on a flat netlist.     

Thin film based semi-active resonant marker design for low profile interventional cardiovascular MRI devices

Objectives

A new microfabrication method to produce low profile radio frequency (RF) resonant markers on catheter shafts was developed. A semi-active RF resonant marker incorporating a solenoid and a plate capacitor was constructed on the distal shaft of a 5 Fr guiding catheter. The resulting device can be used for interventional cardiovascular MRI procedures.

Materials and methods

Unlike current semi-active device visualization techniques that require rigid and bulky analog circuit components (capacitor and solenoid), we fabricated a low profile RF resonant marker directly on guiding the catheter surface by thin film metal deposition and electroplating processes using a modified physical vapor deposition system.

Results

The increase of the overall device profile thickness caused by the semi-active RF resonant marker (130 µm thick) was lowered by a factor of 4.6 compared with using the thinnest commercial non-magnetic and rigid circuit components (600 µm thick). Moreover, adequate visibility performance of the RF resonant marker in different orientations and overall RF safety were confirmed through in vitro experiments under MRI successfully.

Conclusion

The developed RF resonant marker on a clinical grade 5 Fr guiding catheter will enable several interventional congenital heart disease treatment procedures under MRI.

     

Investigation of Inclined Turbulators for Heat Transfer Enhancement in a Solar Air Heater

ABSTRACT

In the present study, the effect of forward inclined turbulators on the heat transfer enhancement in a duct is investigated, for forced convection. Turbulator configurations with three different pitch ratios and three different inclination angles are investigated for seven Reynolds numbers within the range 500–50,000. Investigations are performed experimentally as well as computationally, within a computational fluid dynamics framework. A distinguishing feature of the latter has been the employment of a turbulence model, the transitional shear stress transport model that is applicable throughout the presently considered range of Reynolds numbers containing laminar, transitional, and turbulent regions. At the beginning of the study, measurements and predictions are validated against analytical and empirical expressions known for a plain duct. The results obtained for turbulators configurations indicate that Nusselt number increases with the inclination angle but decreases with the pitch ratio. The influence of the inclination angle on the Nusselt number and thermal enhancement factor is found to be stronger than that of the pitch ratio. For all Reynolds numbers and for all configurations, the thermohydraulic performance is observed to increase, leading to thermal enhancement factors within the range 2–5. In all cases, a quite good agreement of the predictions and experiments is observed, which increases the confidence in the accuracy of both approaches.     

Prediction of flow fields and temperature distributions due to natural convection in a triangular enclosure using Adaptive-Network-Based Fuzzy Inference System (ANFIS) and Artificial Neural Network (ANN)

Artificial Neural Network (ANN) and Adaptive-Network-Based Fuzzy Inference System (ANFIS) were used to predict the natural convection thermal and flow variables in a triangular enclosure which is heated from below and cooled from sloping wall while vertical wall is maintained adiabatic. Governing equations of natural convection were solved using finite difference technique by writing a FORTRAN code to generate database for ANN and ANFIS in the range of Rayleigh number from Ra = 10⁴ to Ra = 10⁶ and aspect ratio of triangle AR = 0.5 and AR = 1. Thus, the results obtained from numerical solutions were used for training and testing the ANN and ANFIS. A comparison was performed among the soft programming and Computational Fluid Dynamic (CFD) codes. It is observed that although both ANN and ANFIS soft programming codes can be used to predict natural convection flow field in a triangular enclosure, ANFIS method gives more significant value to actual value than ANN.     

Modeling of striplines between a power and a ground plane

In this paper, a stripline model is presented for coupled signal lines routed between a power and a ground plane based on multiconductor transmission line (MTL) theory. Through a suitable diagonalization of the MTL equations for striplines, the transverse electromagnetic (TEM) parallel-plate mode is decoupled from the stripline mode. In this way, stripline models that are obtained assuming ideal planes at ground potential can be extended to take into account the nonideal behavior of the planes. The presented model is applied to represent mode conversion due to vias, holes in the reference planes, and terminations of the stripline. Influence of inhomogeneous media is discussed.     

Discriminative analysis of lip motion features for speaker identification and speech-reading.

There have been several studies that jointly use audio, lip intensity, and lip geometry information for speaker identification and speech-reading applications. This paper proposes using explicit lip motion information, instead of or in addition to lip intensity and/or geometry information, for speaker identification and speech-reading within a unified feature selection and discrimination analysis framework, and addresses two important issues: 1) Is using explicit lip motion information useful, and, 2) if so, what are the best lip motion features for these two applications? The best lip motion features for speaker identification are considered to be those that result in the highest discrimination of individual speakers in a population, whereas for speech-reading, the best features are those providing the highest phoneme/word/phrase recognition rate. Several lip motion feature candidates have been considered including dense motion features within a bounding box about the lip, lip contour motion features, and combination of these with lip shape features. Furthermore, a novel two-stage, spatial, and temporal discrimination analysis is introduced to select the best lip motion features for speaker identification and speech-reading applications. Experimental results using an hidden-Markov-model-based recognition system indicate that using explicit lip motion information provides additional performance gains in both applications, and lip motion features prove more valuable in the case of speech-reading application.     

Incompressible micromorphic fluid model for turbulence

A theory of incompressible micromorphic fluids is introduced as a rational model for turbulence studies. Balance laws and constitutive equations are given. The theory is then applied to obtain the solution of the turbulent channel flow problem. Turbulent velocity, gyrations, Reynolds stresses, root-mean squares of longitudinal and transverse turbulent velocities, and turbulent shear stress are given.