A thermodynamic analysis of the phase equilibria of the Fe-Ni system above 1200 K

A quasi-subregular solution model is used to describe the thermodynamic properties of the liquid phase; values of the solution parameters are obtained from extensive and consistent thermochemical data reported in the literature. For the fcc and bcc phases, the same model is used to account for the nonmagnetic part of the Gibbs energy and the magnetic contribution is taken from the previous paper. Again, the values for the quasi-subregular solution parameters for the fcc phase are obtained from extensive and consistent thermochemical data reported in the literature at high temperatures. The values of the solution parameters for the bcc phase are obtained from the thermodynamic values of the liquid and fcc phases and the known phase boundary data. The calculated phase equilibria are in good agreement with the available data. Based on the thermodynamic data, the metastablel + γ andl + δ phase boundaries as well as theT ₀ (γ + l) andT ₀(δ +l) curves are calculated.     

Oscillatory-sensitization model of repeated drug exposure: cocaine's effects on shock-induced hypoalgesia

1. The authors have recently proposed that the sensitization produced by repeated exposure to drugs or stress may give way to an alternating pattern of increases and decreases in the response to each subsequent exposure (i.e., oscillate), as the limits of the physiological system are approached. 2. Evidence for oscillation has been obtained for 6 drug/non-drug stressors and 9 neurochemical or endocrine endpoints. This paper extends the model to a behavioral outcome. 3. In the first experiment, rats were given 0, 1, 2 or 3 pretreatments with cocaine hydrochloride (COC; 12 mg/kg i.p.), separated by 1-week intervals, and then were tested for footshock-induced hypoalgesia (5-sec, 2-mA), as measured by withdrawal latencies from a hot-plate. 4. The second experiment replicated the first and extended the pretreatment sequence to 5 COC injections. 5. In both experiments, shock significantly increased latencies over the no-shock controls. COC enhanced shock-induced hypoalgesia and this sensitization reached its maximum after 2 COC pretreatments. Thereafter, oscillation developed such that the sensitization was attenuated by 3 as compared to 2 COC injections, enhanced by 4 injections, and reattenuated after 5 COC pretreatments. 6. These data complement other findings by demonstrating that the oscillation model extends to a stress-induced behavioral outcome.     

Wireless telegraphy circa 1898-99: the untold South African story

This article discusses some of the lesser-known events predating the first attempted rise of the new technology of wireless telegraphy, for military communications during the Anglo-Boer War of 1899-1902. Copious use has been made of original and little-known documentary material to prepare this paper. Much of this material has never been published before. As such, the article provides an interesting insight into the way that the pioneers in the field tried to come to grips with a technology which would ultimately have a major impact on society     

Single‐Phase Filamentary Cellular Breakdown Via Laser‐Induced Solute Segregation

Nanosecond melting and quenching of materials offers a pathway to novel structures with unusual properties. Impurity‐rich silicon processed using nanosecond‐pulsed‐laser‐melting is known to produce nanoscale features in a process referred to as “cellular breakdown” due to destabilization of the planar liquid/solid interface. Here, atom probe tomography combined with electron microscopy is applied to show that the morphology of cellular breakdown in these materials is significantly more complex than previously documented. Breakdown into a complex, branching filamentary structure topped by a few nm of a cell‐like layer is observed. Single‐phase diamond cubic silicon highly supersaturated with at least 10% atomic Co and no detectable silicides is reported within these filaments. In addition, the unprecedented spatio‐chemical accuracy of the atom probe allows to investigate nanosecond formation dynamics of this complex material. Previously reported properties of these materials can now be reconsidered in light of their true composition, and this class of inhomogeneous metastable alloys in silicon can be explored with confidence.     

Economic incentives and regulatory framework for shale gas well site reclamation in Pennsylvania

Improperly abandoned gas wells threaten human health and safety as well as pollute the air and water. In the next 20 years, tens of thousands of new gas wells will be drilled into the Marcellus, Utica, and Upper Devonian shale formations of Pennsylvania. Pennsylvania currently requires production companies to post a bond to ensure environmental reclamation of abandoned well sites, but the size of the bond covers only a small fraction of the site reclamation costs. The economics of shale gas development favor transfer of assets from large entities to smaller ones. With the assets go the liabilities, and without a mechanism to prevent the new owners from assuming reclamation liabilities beyond their means, the economics favor default on well-plugging and site restoration obligations. Policy options and alternatives to bonding are discussed and evaluated.     

Quantifying remediation effectiveness under variable external forcing using contaminant rating curves

Remediation efforts are typically assessed through before-and-after comparisons of contaminant concentrations or loads. These comparisons can be misleading when external drivers, such as weather conditions, differ between the pre- and postremediation monitoring periods. Here, we show that remediation effectiveness may be better assessed by comparing pre- and postremediation contaminant rating curves, which permit "all else equal" comparisons of pre- and postremediation contaminant concentrations and loads under at any specified external forcing. We illustrate this approach with a remediation case study at an abandoned mercury mine in Northern California. Measured mercury loads in the stream draining the mine site were a factor of 1000 smaller after the remediation than before, superficially suggesting that the cleanup was 99.9% effective, but rainstorms were weaker and less frequent during the postremediation monitoring period. Our analysis shows that this difference in weather conditions alone reduced mercury loads at our site by a factor of 73-85, with a further factor of 12.6-14.5 being attributable to the remediation itself, implying that the cleanup was 92-93% (rather than 99.9%) effective. Our results illustrate the need to account for external confounding drivers when assessing remediation efforts, particularly in systems with highly episodic forcing.     

Coaxial ion trap mass spectrometer: concentric toroidal and quadrupolar trapping regions

We present the design and results for a new radio-frequency ion trap mass analyzer, the coaxial ion trap, in which both toroidal and quadrupolar trapping regions are created simultaneously. The device is composed of two parallel ceramic plates, the facing surfaces of which are lithographically patterned with concentric metal rings and covered with a thin film of germanium. Experiments demonstrate that ions can be trapped in either region, transferred from the toroidal to the quadrupolar region, and mass-selectively ejected from the quadrupolar region to a detector. Ions trapped in the toroidal region can be transferred to the quadrupole region using an applied ac signal in the radial direction, although it appears that the mechanism of this transfer does not involve resonance with the ion secular frequency, and the process is not mass selective. Ions in the quadrupole trapping region are mass analyzed using dipole resonant ejection. Multiple transfer steps and mass analysis scans are possible on a single population of ions, as from a single ionization/trapping event. The device demonstrates better mass resolving power than the radially ejecting halo ion trap and better sensitivity than the planar quadrupole ion trap.     

Spatial distribution of manganese in enamel and coronal dentine of human primary teeth

Emerging evidence indicates that excessive exposure to manganese (Mn) during the prenatal period and early childhood may result in neurodevelopmental deficits. However, accurate exposure biomarkers are not well established, limiting our understanding of exposure-response relationships over these susceptible periods of development. Naturally shed deciduous teeth are potentially a useful biomarker of environmental exposure to Mn. However, the uptake and distribution of Mn in human teeth has not been studied in detail.Mn distribution was measured at high resolution (~ 20 μm) in eight human primary teeth using laser ablation-inductively coupled plasma-mass spectrometry. A bio-imaging methodology was applied to construct detailed elemental maps of three incisors, and bone meal (NIST SRM 1486) was used to validate the analyses.The distribution of Mn in enamel and coronal dentine showed a distinct and reproducible pattern. In enamel, the ⁵⁵Mn:⁴³Ca ratio was highest at the outer edge of enamel (range = 0.57 to 4.74) for approximately 20-40 μm but was substantially lower in deeper layers (range = 0.005 to 0.013). The highest levels of Mn were observed in dentine immediately adjacent the pulpal margin (⁵⁵Mn:⁴³Ca range = 2.27 to 6.95). Importantly, a clearly demarcated high Mn zone was observed in dentine at the incisal end of the teeth. Using confocal laser scanning microscopy to visualize the neonatal line, this region was identified as being in the prenatally formed dentine.The high-resolution map of the spatial distribution of Mn in human primary teeth highlighted specific reproducible patterns of Mn distribution in enamel and coronal dentine.     

What you always wanted to know about Datalog (and never dared toask)

Datalog, a database query language based on the logic programming paradigm, is described. The syntax and semantics of Datalog and its use for querying a relational database are presented. Optimization methods for achieving efficient evaluations of Datalog queries are classified, and the most relevant methods are presented. Various improvements of Datalog currently under study are discussed, and what is still needed in order to extend Datalog's applicability to the solution of real-life problems is indicated