Active Microwave Remote Sensing of an Anisotropic Random Medium Layer

A two-layer anisotropic random medium model has been developed to study the active remote sensing of the Earth. The dyadic Green's function for a two-layer anisotropic medium is developed and used in conjunction with the first-order Born approximation to calculate the backscattering coefficients. It is shown that strong cross-polar-ization occurs in the single scattering process and is indispensable in the interpretation of radar measurements of sea ice at different frequencies, polarizations, and viewing angles. The effects of anisotropy on the angular responses of backscattering coefficients are also illustrated trated.     

Extreme Thermal Loading on Steel Bridges in Tropical Region

In the design of highway bridges, it is important to consider the thermal stresses induced by the nonlinear temperature distribution in the bridge deck irrespective of their spans. To cope with this, design temperature profiles are provided by many bridge design codes, which are normally based on extensive research on the thermal behavior of bridges. This paper presents the results of a comprehensive investigation on the thermal behavior of steel bridges carried out in Hong Kong. A method for predicting bridge temperatures from given meteorological conditions is briefly discussed. The theoretical results have been validated by temperature measurements on experimental models mounted on the roof of a building as well as on an existing steel bridge. Both the theoretical and field results confirm the validity of the one-dimensional heat transfer model on which most design codes are based. Values of design thermal loading for a 50-year return period are determined from the statistics of extremes over 40 years of meteorological information in Hong Kong. The design temperature profiles for various types of steel bridge deck with different thickness of bituminous surfacing are developed.     

Active Pressure for Circular cut with Berezantzev's and Prater's Theories,Numerical Modeling and Field Measurements

A simplified slip line solution of the axi-symmetric active earth pressure based on a general lateral stress coefficient for general c-φ soil system is developed in the present paper. The results from the simplified slip line analysis are compared with those by Prater and results from numerical modeling. It is found that Prater's method may give surprising results and the limitations of Prater's results are also discussed in this paper. The authors have also investigated the importance of the lateral stress coefficient and the lower bound of the coefficient which are not considered in the past.     

Investigation of solid electrolyte interfacial layer development during continuous cycling using ac impedance spectra and micro-structural analysis

The formation of passivating surface films on the electrodes of a lithium-ion polymer battery was investigated at various cycling state using ac impedance spectroscopy and scanning electron microscopy (SEM). A sealed commercial cell (Sony Co.) with a nominal capacity of 840 mAh was used for the experiment. An equivalent circuit used to model the impedance spectra show that, with continuous cycling there is a relatively large increase in the interfacial impedance and charge transfer resistances after a few hundred charge–discharge cycles. It was observed that the cell capacity decrease with increase cell impedance. SEM analysis on the electrodes shows that during continuous charge–discharge cycling, the deposition of sub-micro-size particles and dissolution of surface films on the graphite surface. This observation is consistent with increase in cell impedance as a function of charge/discharge cycling.     

Finite strip method for the free vibration and buckling analysis of plates with abrupt changes in thickness and complex support conditions

The free vibration problem of a stepped plate supported on non-homogeneous Winkler elastic foundation with elastically mounted masses is formulated based on Hamilton's principle. The stepped plate is modelled by finite strip method. To overcome the problem of excessive continuity of common beam vibration functions at the location of abrupt change of plate thickness, a set of C¹ continuous functions have been chosen as the longitudinal interpolation functions in the finite strip analysis. The C¹ continuous functions are obtained by augmenting the relevant beam vibration modes with piecewise cubic polynomials. As these displacement functions are built up from beam vibration modes with appropriate corrections, they possess both the advantages of fast convergence of harmonic functions as well as the appropriate order of continuity. The method is further extended to the buckling analysis of rectangular stepped plates. Numerical results also show that the method is versatile, efficient and accurate.     

Creep and shrinkage analysis of reinforced concrete frames by history‐adjusted and shrinkage‐adjusted elasticity moduli

Consideration of the time‐dependent deformations due to creep and shrinkage is often necessary to ensure satisfactory behavior of complex concrete structures. The stresses and deformations of a reinforced concrete frame can be analyzed by the finite element method using time integration. However, as the full stress history prior to each time interval considered is necessary, with the increase in the number of time intervals used, the amount of computations increases dramatically. The concept of age‐adjusted elasticity modulus is further explored to develop new functions for efficient evaluation of time‐dependent behavior of concrete frames. The history‐adjusted elasticity modulus is devised so that stage construction can be modeled more accurately. Likewise, the shrinkage‐adjusted elasticity modulus is introduced to enable shrinkage analysis to be carried out using one single step. The methods can cope with frame structures built and loaded in several stages. Accurate results can be obtained by considering just a few large time intervals instead of those fine time steps used in time integration. Numerical examples are presented to demonstrate the usefulness of the new methods. Copyright © 2007 John Wiley & Sons, Ltd.     

Biomonitoring using accessible human cells for exposure and health risk assessment

We describe a nonradioactive preembedding in situ hybridization protocol using digoxigenin-labeled RNA probes and tyramide signal amplification to increase the sensitivity of detection. The protocol is sensitive enough for electron microscopic localization of endogenous messenger RNAs encoding beta-actin and amphoterin. Three visualization methods were compared: diaminobenzidine enhanced by nickel, Nanogold enhanced by silver and gold toning, and fluorescently labeled tyramides. Diaminobenzidine and Nanogold can be used in both light and electron microscopy. The nickel-enhanced diaminobenzidine was the most sensitive visualization method. It is easy to accomplish but a drawback is poor spatial resolution, which restricts its use at high magnifications. Nanogold visualization has considerably better spatial resolution and is therefore recommended for electron microscopy. Fluorescent tyramides, especially TRITC-tyramide, offer a good detection method for fluorescence and confocal microscopy. The methods were used to localize amphoterin and beta-actin mRNAs in motile cells. Both mRNAs were found in the soma and cell processes. In double labeling experiments, beta-actin mRNA localized to filamentous structures that also contained ribosomal proteins. Especially in the cortical cytoplasm, beta-actin mRNA was associated with actin filaments. Direct localization to microtubules was only rarely seen. (J Histochem Cytochem 47:99-112, 1999)     

Theoretical studies of CO hydrogenation to methanol over Cu, Pd, and Pt metals

Theoretical studies of CO hydrogenation to methanol over Cu, Pd, and Pt metals have been carried out using a quasi‐relativistic density‐functional method. The metal surface is simulated by a M₁₀ cluster model. Reaction energies for the elementary steps involved are determined. The activation energies are estimated by the analytic BOC‐MP formula. The results support that these metals are active in CO hydrogenation to methanol. The rate‐determining steps are shown to be different for the metals. The highest activation energies of reaction on the metals fall in the order Cu < Pd < Pt, which corresponds to the order of the catalytic activities of the metals in CO hydrogenation. This revised version was published online in July 2006 with corrections to the Cover Date.     

Process Capability Improvement for Multistage Processes

While the quality control procedures for multistage has been considerably studied, multistage process capability analysis has not been explored much at all. Fostering on the recent development of the multistage process variation transmission model, a multistage process capability analysis algorithm is developed to prioritize process improvement efforts. The application of algorithm is demonstrated with two 2-stage industrial process examples and a 4-stage process example for its expandability.     

Efficient visualization of large routing topologies

As the Internet grows in size and complexity, network managers face a significant challenge in trying to understand the behaviour of routing protocols in large networks. In this paper, we present a tool called VLNT (visualizing large network topologies), which helps network managers to analyse complex routing topologies. A key contribution of our system is a novel hybrid layout algorithm, which significantly reduces the computation time required to layout large network topologies in comparison to conventional layout approaches. In addition our algorithm includes a novel termination criterion that avoids unnecessary iterations when optimizing the network layout. We demonstrate how the visualization features of VLNT can be used to analyse and improve BGP routing topologies, and provide examples using real‐life routing data. Copyright © 2004 John Wiley & Sons, Ltd.