以网格曲线为连续条件的光滑曲面

本文提出一种以网格边界曲线定义曲面的方法。曲面的计算式唯一地由网格的四条边界线的参数而定，各网格间连接的光滑度完全由网格间的边界线的光滑度来决定。当网格间的边界线具有Ｃ~１连续以上的光滑度时，网络曲面间将自动保证是Ｃ~１连续的，否则将是Ｃ~０连续。利用这个方法，可以方便地从线框模型（ｗｉｒｅ－ｆｒａｍｅｍｏｄｅｌ）建立面模型（ｓｕｒｆａｃｅｍｏｄｅｌ）。     

激光冶炼太阳级硅材料的实验研究

通过实验研究表明，大功率ＣＯ２激光器在廉价硅材料制备中应用的可能性。     

The Solutions for Adjustment and Reconstruction of Water-Drive Surface Systems in the Old Areas of Daqing Oilfield

Introduction 　　Owing to long-time running, more facilities including stations, pipelines, vessels have become corrosive and aged ,some process has grown old, it has exert more burden for the maintenance and repair.Simultaneously, the fluid production rate, oil production rate and water injection rate has changed greatly so that the inflicts and problems from the established surface systems will become more obvious. Energy cost of production and running has increasing continuously. Capacity has been unbalance in systems and areas. 　　……     

大坝安全监控专家系统中的知识处理

在介绍产生式规则及其数学模型的基础上，论述了用成熟的关系数据库 技术来表示和存储产生式规则表示的专家知识的方法，较好地解决了知识的存储和管理问题 。同时，利用关系数据库中实体间的关系，很容易将分散存储的规则元素组合成规则供推理 时使用。在分析了大坝安全监控专家系统知识特点的基础上举例说明了用关系数据库表 示产生式规则的具体方法。     

在协议集成测试系统上开展路由协议测试

在分析路由协议的特性及其测试需求的基础上，提出利用窗口黑盒来描述被测协议，利用多通道测试方法扩展对被测实现的控制和观察，通过扩充参考实现增强系统的测试能力。将这些理论，技术应用于系统中，对路由协议开展了有效的测试活动，为国产高性能路由器的开发提供了有力的支持，也进一步增强了PITS系统的功能和适用性。     

环保型隧道防火涂料的研究

介绍了国内外公路隧道、铁路隧道及地铁火灾情况 ,研制出一种可在潮湿环境中使用、火灾发生时无有害气体产生的环保型隧道防火涂料。涂层厚度 18～2 0 mm,耐火极限达 3小时。为防止涂料加水拌和后沉淀分层 ,增加涂料的和易性 ,研制出一种分散剂。     

Effect of misalignment on electrical characteristics of ACF joints for flip chip on flex applications

The effect of misalignment on the electrical properties of anisotropic conductive film (ACF) joints is investigated in this work. It is found that along with the increase of misalignment, the connection resistance of ACF joints increases. When the misalignment in x-direction is less than 5 μm, the increase rate of connection resistance is quite large. Then, along with the severity of misalignment, the increase rate becomes smaller. Finally, when the misalignment is close to 20 μm, the increase rate rises again. The Holm's electric contact theory is used for understanding the connection resistance variation. On the other hand, with the increase of misalignment in x-direction, the insulation resistance between ACF joints decreases. If the misalignment exceeded 10 μm, the decrease is prominent for the Ni particle ACF joints. This phenomenon can be explained by the effect of dielectric damage of the epoxy.Computer programs are also developed to calculate the variation of the probability of open and shorting after misalignment and predicate the maximum misalignment tolerance. The results show that the open and shorting probability increase abruptly after misalignment. On the view of pad parameters, the open probability is mainly related to the pad area, while the pads gap is critical to the shorting probability. Large pads gap (small pad width) can reduce the shorting probability obviously. On the other hand, enlarging the pad area by increasing pad length decreases the open probability significantly. So comparing to square shape pad, rectangle shape pad can reduce the failure probability greatly.     

High temperature controlled atmosphere experiments for catalysts in a transmission electron microscope

A new transmission electron microscopy (TEM) specimen preparation procedure for high temperature experiments using a controlled atmosphere specimen holder (HTCASH) has been developed. It is designed for studying the microstructure of catalyst specimens before and after treatments in various gases. The procedure involved (1) finding a new formula for the embedding material, (2) devising a new method of making specimen supports, and (3) developing a method for removing the embedding material after the specimen has been microtomed. These techniques were then brought together to produce the ideal specimens for the HTCASH experiments. As an extra benefit, this procedure is also suitable for preparing specimens for ultrahigh resolution imaging experiments. The application of the new procedure in HTCASH experiments is illustrated through a high temperature reduction of a Co/SiO₂-923 catalyst.     

钛及其合金在化学及石油化学工业中的应用

钛及其合金可用于制造化学和石油化学工业中的各种设备。这是因为钛及其合金具有优异的机械性能、良好的耐腐蚀性能、生物惰性等特点。腐蚀问题是化学工业中最突出的问题之一 ,利用各种新型耐腐蚀材料 ,是解决腐蚀问题的最有效方法。因为工程纯钛的机械性能和耐蚀性能取决于氧、氮及铁之类杂质的含量 ,所以要根据机械和腐蚀化学要求选择具有各种不同强度性能的钛及其合金。杂质成分对钛的加工或应用时的可塑性有影响。压力容器应用的钛材有较高的强度要求 ,但是用作衬里及零部件时要经受较大的变形 ,因而要选择具有杂质含量少、强度较低而塑…     

从菜西瓜中提取果胶的最佳工艺研究

为确定从菜西瓜中提取果胶的最佳工艺条件,以山西省临汾市菜西瓜为材料,采用酸法进行了提取果胶的试验研究。正交试验结果表明:在萃取时间为45min的前提下,从瓜瓤中提取果胶的最佳工艺条件是加水量为原料重量的4倍,85℃下,添加原料重量0.3％的多聚磷酸钠,果胶得率可达2.03％;从外果皮中提取果胶,加水量为原料重量的4倍,75℃下,添加原料重量0.7％的多聚磷酸钠,果胶得率可达2.98％。