Technologies and the development of the Automated Metadata Indexing and Analysis (AMIA) system

The Automated Metadata Indexing and Analysis (AMIA) project aims to provide an effective digital asset management (DAM) tool for large digital asset databases. We began with text-based indexing since it is still the most reliable approach as compared with other content-based media features. AMIA not only searches for the text of the file name, but also utilizes embedded information such as the metadata in Maya files. The AMIA system builds a linked map between all dependency files. We present an approach of preserving previously established metadata created by the old DAM tools, such as AlienBrain, and integrating them into the new system. Findings indicate that AMIA has significantly improved search performance comparing to previous DAM tools. Finally, the ongoing and future work in the AMIA project is described.     

Nearly dispersion-penalty-free transmission using blue-shifted1.55-μm distributed feedback lasers

Nearly dispersion-penalty-free transmission over 40 km of nondispersion-shifted single-mode fiber was demonstrated using blue-shifted 1.55-μm distributed feedback lasers. This good system performance is attributed to the narrow and blue-shifted modulated optical spectrum which is in turn associated with the soft turn-on light-current characteristics. Transmission experiments using lasers with hard turn-on light-current characteristics give rise to broad modulated spectra and higher dispersion penalties     

The preparation of PLZT ceramics from a sol-gel process

Sol-gel process is employed to prepare PLZT ceramic with the composition 9/56/44 (La/Zr/Ti). Complete crystallization of the sol-gel derived powders is achieved after 600°, 1 hr. calcination. The sintered density of the PLZT pellet decreases as the sintering time increases. A ninety-nine percent theoretical density is obtained for samples sintered at 1250° for one hour. The dielectric properties and optical transmission of the sol-gel derived samples are measured and compared with those of the hot-pressed PLZT ceramics reported in the literature. Sol-gel derived powders, when properly sintered, possess sufficient optical transparency for optoelectrical device applications.     

Steering control of automated vehicles using absolute positioning GPS and magnetic markers

Steering control for passenger cars on automated highways is analyzed. The feasibility of an automatic steering system based on absolute positioning global positioning system (GPS) and a magnetic marker guidance system has been evaluated using computer simulations. State estimation and control algorithm issues are examined for such a control system. By use of GPS and a magnetic marker sensor, an accurate and real-time estimation of the vehicle's lateral displacements with respect to the road can be accomplished. A steering control algorithm based on road curvature preview for achieving good road tracking and providing ride comfort is also presented. The proposed estimation and control system are validated by simulation results.     

Microstrip stepped impedance resonator bandpass filter with an extended optimal rejection bandwidth

Bandpass filters with an optimal rejection bandwidth are designed using parallel-coupled stepped impedance resonators (SIRs). The fundamental (f/sub o/) and higher order resonant harmonics of an SIR are analyzed against the length ratio of the high-Z and low-Z segments. It is found that an optimal length ratio can be obtained for each high-Z to low-Z impedance ratio to maximize the upper rejection bandwidth. A tapped-line input/output structure is exploited to create two extra transmission zeros in the stopband. The singly loaded Q(Q/sub si/) of a tapped SIR is derived. With the aid of Q/sub si/, the two zeros can be independently tuned over a wide frequency range. When the positions of the two zeros are purposely located at the two leading higher order harmonics, the upper rejection band can be greatly extended. Chebyshev bandpass filters with spurious resonances up to 4.4f/sub o/, 6.5f/sub o/, and 8.2f/sub o/ are fabricated and measured to demonstrate the idea.     

Triple-frequency planar monopole antenna for side-feed communication device on GSM/DCS/PCS operation

A novel side-feed planar monopole antenna capable of triple-frequency operation at about 900, 1800 and 1900 MHz is presented. The planar monopole antenna occupies a small area of 6/spl times/31 mm, and is easily made using thin copper. The planar monopole antenna can be side-fed and mounted perpendicularly to the main circuit board of a communication device so that it offers a novel design with a free degree of feed point so as to save device space, resulting in a low profile to the system ground plane. In addition, the obtained impedance bandwidths of the proposed antenna at about 900, 1800 and 1900 MHz can cover the GSM (890-960 MHz), DCS (1710-1880 MHz) and PCS (1850-1990 MHz) bands.     

Confined Ferroelectric Properties in Poly(Vinylidene Fluoride‐co‐Chlorotrifluoroethylene)‐graft‐Polystyrene Graft Copolymers for Electric Energy Storage Applications

Dielectric polymer film capacitors having high energy density, low loss and fast discharge speed are highly desirable for compact and reliable electrical power systems. In this work, we study the confined ferroelectric properties in a series of poly(vinylidene fluoride‐co‐chlorotrifluoroethylene)‐graft‐polystyrene [P(VDF‐CTFE)‐g‐PS] graft copolymers, and their potential application as high energy density and low loss capacitor films. Thin films (ca. 20 μm) are prepared by different processing methods, namely, hot‐pressing or solution‐casting followed by mechanical stretching at elevated temperatures. After crystallization‐induced microphase separation, PS side chains are segregated to the periphery of PVDF crystals, forming a confining interfacial layer. Due to the low polarizability of this confining PS‐rich layer at the amorphous–crystalline interface, the compensation polarization is substantially decreased resulting in a novel confined ferroelectric behavior in these graft copolymers. Both dielectric and ferroelectric losses are significantly reduced at the expense of a moderate decrease in discharged energy density. Our study indicates that the best performance is achieved for a P(VDF‐CTFE)‐g‐PS graft copolymer with 34 wt‐% PS; a relatively high discharged energy density of approximately 10 J cm^?3 at 600 MV m^?1, a low dielectric loss (tanδ = 0.006 at 1 kHz), and a low hysteresis loop loss (17.6%) at 550 MV m^?1.     

A high-speed low-voltage double-switch optical crossconnect using stress-induced bending micromirrors

A high-speed low-voltage double-switch electrostatically actuated optical crossconnect (OXC) is demonstrated using stress-induced bending micromirrors. A curved polysilicon seesaw structure substantially lowers the electrostatic operating voltage of the OXC and provides a double-switch option. Large mirror deflection angles of 13/spl deg/ (mirror elevation of 290 /spl mu/m high) and 5/spl deg/ (cantilever deflection of 90 /spl mu/m high), corresponding to low operating voltages of 25 and 18 V, could be obtained. A submillisecond switching time (<850 /spl mu/s), a low optical insertion loss (0.65 dB), and a small polarization-dependent loss (<0.08 dB) are achieved.     

Design of quasi-elliptic function filters with a dual-passband response

Compact miniaturized hairpin resonators are used to design cross-coupled filters with a dual-passband response of elliptic function type. The hairpin resonators are treated as a stepped impedance resonator (SIR) in analysis. In a filter, two different hairpin resonators are used to establish proper couplings required for the two design frequencies. Two filters are fabricated and measured. The results show a good agreement with the simulation.     

As/sup +/-implanted AlGaAs oxide-confined VCSEL with enhanced oxidation rate and high performance uniformity

We report the utilization of an As/sup +/-implanted AlGaAs region and regrowth method to enhance and control the wet thermal oxidation rate for 850-nm oxide-confined vertical-cavity surface-emitting laser (VCSEL). The oxidation rate of the As/sup +/-implanted device showed a four-fold increase over the nonimplanted one at the As/sup +/ dosage of 1/spl times/10/sup 16/ cm/sup -3/ and the oxidation temperature of 400/spl deg/C. 50 side-by-side As/sup +/-implanted oxide-confined VCSELs fabricated using the method achieved very uniform performance with a deviation in threshold current of /spl Delta/I/sub th//spl sim/0.2 mA and slope-efficiency of /spl Delta/S.E./spl sim/3%.