Structure and properties of compatibilized blends of polyamide-6 and ABS

Mechanical and Morphological properties of polyamide-6/ABS blend systems, compatibilized by styrene-maleic anhydride (SMA) copolymer, have been studied. The strength, modulus, and impact properties improved upon the addition of SMA. Morphological studies, using small angle light scattering, polarizing microscopy, and scanning electron microscopy, showed that SMA acts as a compatibilizer for the above system. © 1993 John Wiley & Sons, Inc.     

Polybutylene terephthalate/high-density polyethylene alloys. I. Morphological studies

Polybutylene terephthalate (PBT) is a commercially successful thermoplastic polyester but has certain drawbacks such as low impact strength and low melt strength. An attempt has been made to modify the properties of PBT by blending it with polyolefin such as highdensity polyethylene (HDPE). Since PBT and HDPE are incompatible, an ionomer has been used as a compatibilizer to form an alloy. Alloys of PBT and HDPE with varying amounts (2-8%) of ionomer were prepared by melt blending. The ultimate mechanical properties improved significantly on the addition of the ionomer due to an increase in interfacial adhesion between PBT and HDPE. DSC studies show that the presence of ionomer facilitated the crystallization of PBT in the alloy. DMTA studies show that more of PBT (amorphous) is going in to the HDPE-rich phase in the presence of ionomer. The morphology of the alloys was studied using scanning electron microscopy (SEM), polarizing microscopy (PM), and small-angle light scattering (SALS). They showed improved dispersion of HDPE domains in PBT matrix with increasing ionomer content and change in the type of superstructure on adding the ionomer. It has been shown that an alloy of PBT and HDPE with improved mechanical properties and homogeneous morphology can be made with use of ionomer as a compatibilizer. Such alloys are cost effective and can find use in several engineering applications.     

Mechanical and dynamic mechanical properties of jute fibers–Novolac–epoxy composite laminates

A study was done of jute composite using a polymer matrix of epoxidized Novolac resin (ENR), diglycidyl ether of bisphenol A (DGEBA)–based epoxy, and their blends with different weight percentages of the resins. It was found that on blending ENR with DGEBA, the storage modulii at room temperature are enhanced by about 100% or more in the case of 30 and 40% ENR‐containing matrices, whereas the enhancement in the case of 20 and 12% ENR‐containing matrices is only 50% that of the pure matrix. It was also observed that the tan δ peak heights of the composites containing 30 and 40% ENR are closer to that of 20% ENR‐containing composite. The probable explanation drawn on the basis of experimental findings of DMA and mechanical analysis is that by blending ENR with DGEBA epoxy it is possible to manufacture jute composites with increased stiffness without sacrificing their ductility. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2800–2807, 2002     

Graft copolymerization of acrylonitrile onto acetylated jute fibers

Graft copolymerization of acrylonitrile (AN) onto acetylated chemically modified jute was carried out in the temperature range 40–60°C using V⁵⁺-cyclohexanone redox initiator system. The effects of temperature, time, concentrations of metal ion (V⁵⁺), monomer (AN), cyclohexanone, some inorganic salts, and organic solvents on percent grafting have been studied. IR spectra of acetylated chemically modified jute and grafted jute have been taken, and their characteristic bands have been identified. Grafting has improved the thermal stability and also the lightfastness rating of jute fibers dyed with basic dyes.     

Elevated temperature instrumented Charpy impact of a sintered silicon carbide

A commercially available, densely sintered alpha silicon carbide was tested in air from room temperature to 1700°C using a modified instrumented pendulum unit and standard Charpy size test specimens. The resistance heated silicon carbide specimens exhibited only elastic behavior, even at 1700°C. A compliance analysis of the test revealed a linear elastic decrease of the absorbed impact energy and also a decrease of the fracture stress of the silicon carbide with increasing temperature.     

Viscometric studies of starch-g-polyacrylamide composites

Composites of starch-g-polyacrylamide, starch, and polyacrylamide have been prepared by gamma radiation-initiated polymerization of acrylamide in the presence of starch in aqueous medium. The polymerization was studied as a function of the (i) amount of water (ii) monomer concentration, and (iii) total dose. The optimum conditions for maximum conversion of the monomer to homopolymer and graft copolymer have been evaluated. Percentage of grafting of polyacrylamide could not be determined precisely as both the homopolymer and the graft are soluble in common solvents and all attempts to separate the graft from the homopolymer were unsuccessful. However, the formation of the starch-g-polyacrylamide copolymer was confirmed by the turbidimetric studies using acetone as a nonsolvent. The products of polymerization of acrylamide in the presence of starch consisted of unreacted starch, starch-g-polyacrylamide, and polyacrylamide and is referred to as the composite. Acrylamide was also polymerized in the absence of starch using γ-rays as means of initiation and the optimum conditions for maximum conversion of acrylamide to polyacrylamide have been evaluated. Viscosity behavior of the composite and polyacrylamide was studied in aqueous medium at 30±0.04°C. The reduced specific viscosity of the aqueous solution of acrylamide and the composite as well was found to increase with increasing dilution, the effect being more pronounced in the composite. This tends to indicate that both the homopolymer and the composite behave as polyelectrolytes. An attempt has been made to explain the polyelectrolytic behavior of the homopolymer and the composite. © 1993 John Wiley & Sons, Inc.     

Ractions of SiC with H2/H2O/Ar Mixtures at 1300°C

The reactions of a sintered α-SiC with 5% H₂/H₂O/Ar at 1300°C were studied. Thermomchemical modeling indicates that three reaction regions are expected, depending on the initial water vapor or equivalently oxygen content of the gas stream. A high oxygen content ( P (O₂) > 10⁻²² atm) leads to a SiO₂ formation. This generally forms as a protective film and limits consumption of the SiC (passive oxidation). An intermediate oxygen content (10⁻²² atm > P (O₂) > 10⁻²⁶ atm) leads to SiO and CO formation. These gaseous products can lead to rapid consumption of the SiC (active oxidation). Thermogravimetric studies in this intermediate region gave reaction rates which appear to be controlled by H₂O gas-phase transport to the sample and reacted microstructures showed extensive grain-boundary attack in this region. Finally, a very low oxygen content ( P (O₂) < 10⁻²⁶ atm) is thermochemically predicted to lead to selective removal of carbon and formation of free silicon. Experimentally low weight losses and iron silicides are observed in this region. The iron silicides are attributed to reaction of free silicon and iron impurities in the system.     

Studies on polyblends of poly(vinyl chloride) and acrylonitrile-butadiene-styrene terpolymer

Blends of poly (vinyl chloride) (PVC) and acrylonitrile-butadiene styrene (ABS) terpolymer were prepared in different ratios by a melt blending technique. ABS containing three different levels of rubber content were used. A quantitative assessment of ABS in PVC/ABS blends has been shown by infrared studies. ABS content has been shown as the presence of the characteristic acrylonitrile peak. Differential scanning calorimetry (DSC) studies have been carried out to study the glass transition (T_g) behavior of the blends. Two T_g values corresponding to PVC and styrene-acrylonitrile (SAN) copolymer have been observed. Thermogravimetric analysis (TGA) reveals a significant improvement in thermal stability of these blends as compared to PVC. Mechanical properties show a significant increase in the impact strength which is related to rubber content of the ABS used. Morphological studies have been carried out by scanning electron microscopy which support the observation that an increase in rubber content results in greater ductility.     

Occurrence of wax esters and 1-O-alkyl-2,3-diacylglycerols in goat epididymal sperm plasma membrane

Two unusual lipid classes were detected by thin-layer chromatography in the neutral lipids derived from goat cauda-epididymal sperm plasma membrane. The lipids were identified as wax esters and 1-O-alkyl-2,3-diacylglycerols based on chromatographic properties, identity of their hydrolysis products, and infrared/¹H nuclear magnetic resonance spectral evidence. The membrane containedca. 3 and 5 μg/mg protein of wax esters and alkyldiacylglycerols, respectively. The relative proportions of wax esters and alkyldiacylglycerols in the total neutral lipids were 1.5% and 2.4%, respectively. The lipids contained fatty acids with chain lengths of C₁₄ to C₂₂. The major fatty acids of the wax esters were 14∶0, 16∶0, 16∶1ω7, 18∶0 and 18∶1ω9. The fatty acids in alkyldiacylglycerol were 16∶0, 18∶0, 22∶5ω3 and 22∶6ω3. Alkyldiacylglycerol was particularly rich in docosahexaenoic acid 22∶6ω3) representing 30% of the total fatty acids. The alcohols of wax ester were all saturated with C₂₀–C₂₉ carbon chains. The deacylated products derived from alkyldiacylglycerols were identified as hexadecyl, octadecyl and octadec-9′-enyl glycerol ethers.     

Ion-solvent interaction from viscosity and apparent molar volume of bromates,iodates and sulphates of potassium and sodium in dioxane-water mixtures at different temperatures

The viscosity and apparent molar volume of solutions of KBrO₃, NaBrO₃ KIO₃, NaIO₃, K₂SO₄ and Na₂SO₄ in dioxane (mass fraction: 10, 20 and 30%)-water mixtures at 30, 35, 40 and 45°C have been measured. The ions appear to interact appreciably and the ion-solvent interaction is of the order BrO^?₃ > IO^?₃ > SO^2?₄ and K⁺ > Na⁺.