Homogenization for Dispersion and Reduction in Length of Carbon Nanotubes

An important aspect that limits the use of carbon nanotubes (CNTs) is the difficulty in obtaining homogeneously dispersed CNTs of uniform length. Hence, homogenization of multi-walled carbon nanotubes (MWCNTs) and single-walled carbon nanotubes (SWCNTs) was carried out using bullet blender and the dispersion behavior was compared with that of ultrasonication. 1% sodium dodecyl sulphate (SDS), Triton-x-100 and polyethylene glycol 4000 were used as dispersing agents during homogenization. The dispersed CNTs were studied using transmission electron microscopy, ImageJ and Raman spectroscopy. Though dispersion and reduction in length of MWCNTs were observed both with ultrasonication and homogenization, lowest length range with about 75% reduction in polydispersity index was obtained on homogenization. Longer time of ultrasonication resulted in damage to small MWCNTs. Well dispersed and shorter MWCNTs were obtained with Triton-x-100 while reduction in length was minimum with SDS. SWCNTs of less than 1 μm length could be obtained by homogenization with Triton-x-100.     

Phytochemical Constituents,Attenuated Total Reflectance Fourier Transform Infrared Analysis and Antimicrobial Activity of Four Plant Leaves Used for Preparing Rice Beer in Assam,India

Phytochemicals content and antimicrobial activity of Artocarpus heterophyllus, Cyclosorus extensa, Oldendia corymbosa, and Alpinia malaccensis were investigated. Maximum alkaloids and terpenoids were found in A. heterophyllus; tannins and saponins in C. extensa; flavonoids, polyphenols, and phytosterols in O. corymbosa and anthraquinone, glycosides, and anthocyaninin A. malaccensis. Aqueous, methanolic, ethyl acetate, and hexane extracts were prepared from all the leaves. Attenuated total reflectance Fourier transform infrared spectrophotometric (ATR-FTIR) analysis revealed that alkanes and alkyl halides were prevalent in all the extracts and the ethyl acetate extracts contained comparatively higher number of functional groups, which were also more effective against Candida albicans, Escherichia coli, and Staphylococcus aureus. The minimum inhibitory concentration values of A. malaccensis against the tested pathogens were found to be lesser than the other species.     

Use of mesalime and electric arc furnace (EAF) dust as neutralising agents in biooxidation and their effects on gold recovery in subsequent cyanidation

The cost of lime/limestone for neutralisation is the second largest operating cost in bioleaching. Therefore, these studies have been conducted with the aim to investigate the possibilities for use of by-products such as mesalime and electric arc furnace (EAF) dust for neutralisation during biooxidation of a refractory gold concentrate. Experiments were carried out using a retention time of 57 h in a one-stage reactor and the influence of two industrial by-products on the biooxidation performance was evaluated. The neutralising capacity of EAF dust was lower, while the mesalime was similar to the Ca(OH)₂ reference. The arsenopyrite oxidation in experiments ranged from 85% to 90%, whereas the pyrite oxidation was 63–74%. In subsequent cyanidation, final gold recoveries of 90% were achieved in bioresidues from mesalime and Ca(OH)₂, while the EAF dust bioresidue had a recovery of 85%. A comparatively high elemental sulphur content in EAF dust probably encapsulates part of the gold, which explains the lower recovery for the EAF dust bioresidue despite a longer residence time. Cyanide consumption was relatively high and ranged from 8.1 to 9.2 kg/ton feed after 24 h of cyanidation. Overall, the by-products tested here have proved to be feasible options as neutralising agents in bioleaching operations.     

Augmented reality assisted facility layout digitization and planning

Journal of Mechanical Science and Technology - Facility layout planning (FLP) has an important role in manufacturing industries. There are few approaches to solve FLP such as procedural,...     

Modelling of probability of failure of concrete columns

This paper predicts the probability of failure or short and long columns of square reinforced concrete for deterministic and probabilistic loads. The effect of various parameters; width, length of column, effective length coefficient, percentage of steel, axial load, grade of concrete and random numbers; on the probability of failure of the column is studied. The material, geometric parameters and the load are treated as probabilistic. The results for short columns show that the rate of decrease of probability of failure is a maximum with increase in width, while it increased to a maximum with increase in loads, whereas for long columns the length of column had the predominant effect.     

Synthesis of nanostructured copper hexacyanidoferrate and its application in voltammeteric detection of salbutamol

Nanostructured copper hexacyanidoferrate has been synthesized and characterized using elemental analysis, atomic absorption spectroscopy, thermal and infrared spectral studies. The transmission electron microscopic studies of the synthesized material showed that it consisted of irregular oval and rod shaped particles with a size range 70–100 nm. Nanostructured copper hexacyanidoferrate modified glassy carbon electrode was characterized by cyclic voltammetery and nanostructured copper hexacyanidoferrate–carbon nanotube composite material modified glassy carbon electrode has been used for electrocatalytic oxidation of salbutamol. The electrode modified with composite material was found to reduce the peak potential of oxidation of salbutamol by nearly 90 mV.     

Recovery of copper from a surface altered chalcopyrite contained ball mill spillage through bio-hydrometallurgical route

Bioleaching studies for chalcopyrite contained ball mill spillages are very scarce in the literature. We developed a process flow sheet for the recovery of copper metal from surface activated (600 °C, 15 min) ball mill spillage through bio-hydrometallurgical processing route. Bioleaching of the activated sample using a mixed meso-acidophilic bacterial consortium predominantly A. ferrooxidans strains was found to be effective at a lixiviant flow rate of 1.5 L/h, enabling a maximum 72.36% copper recovery in 20 days. Mineralogical as well as morphological changes over the sample surface were seen to trigger the bioleaching efficiency of meso-acidophiles, thereby contributing towards an enhanced copper recovery from the ball mill spillage. The bio-leach liquor containing 1.84 g/L Cu was purified through solvent extraction using LIX 84I in kerosene prior to the recovery of copper metal by electrowinning. Purity of the copper produced through this process was 99.99%.     

Green composites based on high‐density polyethylene and Saccharum spontaneum: Effect of filler content on morphology,thermal, and mechanical properties

Here we report the preparation and characterization of a green composite based on high‐density polyethylene and Kaans grass (Saccharum spontaneum). The composites were prepared by conventional melt‐mixing method, using maximum loading of Kaans grass in powder form (KG‐filler) to achieve acceptable range of required properties. Maleic anhydride grafted polyethylene was used as compatibilizer to achieve effective interaction for improved surface adhesion which was confirmed by FT‐IR spectroscopy. Morphological studies revealed good interaction between the base polymer matrices and the KG‐fillers that improved the mechanical and thermal properties of the composites up to certain (10 phr) KG‐filler loading. Study on water absorption property revealed moderate increase in weight at higher KG‐filler loadings. Thermogravimetric analysis (TGA) and melt flow index (MFI) studies indicated retention of thermal stability and flow property of the HDPE/KG‐filler composite at lower filler loadings. POLYM. COMPOS., 36:2157–2166, 2015. © 2014 Society of Plastics Engineers     

Chitosan/calcium–alginate beads for oral delivery of insulin

A mild chitosan/calcium alginate microencapsulation process, as applied to encapsulation of biological macromolecules such as albumin and insulin, was investigated. The microcapsules were derived by adding dropwise a protein-containing sodium alginate mixture into a chitosan–CaCl₂ system. The beads containing a high concentration of entrapped bovine serum albumin (BSA) as more than 70% of the initial concentration were achieved via varying chitosan coat. It was observed that approximately 70% of the content is being released into Tris-HCl buffer, pH 7.4 within 24 h and no significant release of BSA was observed during treatment with 0.1M HCl pH 1.2 for 4 h. But the acid-treated beads had released almost all the entrapped protein into Tris-HCl pH 7.4 media within 24 h. Instead of BSA, the insulin preload was found to be very low in the chitosan/calcium alginate system; the release characteristics were similar to that of BSA. From scanning electron microscopic studies, it appears that the chitosan modifies the alginate microspheres and subsequently the protein loading. The results indicate the possibility of modifying the formulation in order to obtain the desired controlled release of bioactive peptides (insulin), for a convenient gastrointestinal tract delivery system. © 1996 John Wiley & Sons, Inc.