Polyacrylonitrile-reinforced poly(vinyl alcohol) membranes: Mechanical and dialysis performance

Membranes used for hemodialysis should have good mechanical strength to withstand the maximum transmembrane pressure. Although crosslinked poly(vinyl alcohol) membrane has superior permeability to solutes, its wet breaking strength is low. Mechanical strength, dry and wet, of membranes made from crosslinked blendmers of poly(vinyl alcohol) and polyacrylonitrile was investigated. The possibilities of these membranes for the application as dialysis membranes were evaluated by estimating its solute permeabilities. The optimum membrane selected shows permeability and mechanical properties comparable with the commercial regenerated cellulose membrane. Polyelectrolyte grafting made the membrane more blood-compatible. © 1995 John Wiley & Sons, Inc.     

Oxime-Modified Aluminum(III) Isopropoxide: A Promising Sol–Gel Precursor for Corrosion Resistive Nano-Alumina Coating on an Aluminum Alloy

Protection of Metals and Physical Chemistry of Surfaces - Dense alumina coatings were fabricated over aluminum alloy via dip coating method using oxime-modified aluminum(III) isopropoxide as a...     

Rheology of Zirconia Suspensions in a Nonpolar Organic Medium

Three dispersants (stearic acid, oleic acid, and poly(12-hydroxystearic acid)) are compared for their ability to produce low-viscosity suspensions of zirconia in kerosene. Rheological measurements and sediment packing density measurements show that poly(12-hydroxystearic acid) is a better dispersant than stearic acid or oleic acid; this is explained in terms of the longer tail of the poly(12-hydroxystearic acid) surfactant molecule. The amount of dispersant can be optimized to reduce viscosity and yield point of the suspension, and to eliminate thixotropic hysteresis. The use of a dispersion medium of lower viscosity than the dispersant makes it easy to detect when complete monolayer coverage has been achieved. The loss of pseudoplasticity, brought about by a higher degree of deflocculation, can be recovered by increasing the volume fraction of solids of a suspension and this is beneficial in the plastic forming of ceramics. Rheological measurements showed that these suspensions reach a "critical state" above a critical shear stress (τ_c). This critical state is described by several parameters, i.e., the Bingham yield stress (τ_b), the plastic viscosity (ν_Pl), and the critical shear rate (γ_c), which are dependent on the volume fraction of solids.     

Ceiling mounted personalized ventilation system in hot and humid climate—An energy analysis

This study is to evaluate energy saving potential of ceiling mounted personalized ventilation (PV) system in conjunction with background mixing ventilation compared with mixing ventilation system alone and with mixing ventilation system when occupants are provided with individually controlled desk fans for generating additional air movement at each desk. Control strategy applied includes different number of personalized ventilation air terminal devices used and different PV airflow rates supplied. Energy calculation is based on design conditions in Singapore, representing a hot and humid climate. The results reveal that increasing room temperature can save cooling energy when the combination of PV with ceiling mounted personalized ventilation nozzles and background mixing ventilation is used. In this case the energy for transport of air increases but the total energy decreases, i.e. energy can be saved due to elevated room temperature. Comparing with mixing ventilation plus desk fans, ceiling mounted personalized ventilation cannot only realize better cooling effect but also decrease the total energy consumption.     

An improved damage diagnostic technique based on Singular Spectrum Analysis and time series models

An approach to enhance the sensitivity of the damage index using the prediction errors of autoregressive – autoregressive exogenous models by augmenting Singular Spectrum Analysis (SSA) to detect and locate minor damage is presented. Numerical simulation studies are carried out by considering a simply supported beam with single and multiple cracks. An experimental study on a reinforced cement concrete beam has been carried out to validate the technique using different levels of damage. The studies emphasise that the SSA improves the sensitivity of the damage index for detection and also localisation, handling environmental/operational variability and measurement noise.     

Hybrid approach for congestion management using optimal placement of distributed generator

Congestion management (CM) in a large power system network is a difficult task which can be solved by placing one or more distributed generators (DGs) on congested lines. The first concern is to determine the exact location of congested line for the placement of optimal size of DG so that cost can be minimised. In this work, hybridisation of firefly technique and differential evolution optimisation search has been proposed, which manages congestion effectively by rescheduling of generators satisfying the system constraints both technically and economically in the deregulated market scenario. To validate the proposed hybrid approach, results have been compared with firefly optimisation technique results. It is observed that the hybrid approach is an efficient tool in handling CM resulting in a secure operation to reduce flows in the heavily loaded lines with low system loss and increasing power capability with improved stability of network by controlling power flows in the network.     

Experimental study on productivity enhancement of an improvised inclined solar still

Experimental studies are carried out on the inclined solar still with baffle plates for enhancing its performance. The baffles placed in the inclined solar still act as a solar collector which helps in increasing the contact time with solar radiation thereby raising the saline water temperature. Experiments are carried out during winter and early summer climate of Chennai, India. Experimental parameters, such as ambient temperature, solar radiation, glass temperature, water temperature and distillate output are recorded. Hourly productivity is found to be higher during sunny days. The estimated production of fresh water through analytical study is 3.50?kg/m² per day for a minimum mass flow rate of 0.0833?kg/min. The actual experimental yield is 2.793?kg/m² per day. Also, the inlet saline water temperature affects the yield and the latter is found to be highest at 48.5°C.     

Identifying the critical success factors for relationship management in PPP projects

The longer the contract period, the higher the chance that major changes will arise. Thus a greater reliance on the established relationships is needed to maintain the contractual bond in PPP project. Relationship management (RM) can therefore be expected to be even more valuable in the PPP context. This paper aims to investigate current perceptions and experiences of RM in PPP projects and more importantly, to identify the CSFs for RM in PPP projects. By means of an empirical questionnaire survey geared towards PPP practitioners with direct hands-on experience, the opinions were solicited, analyzed and compared in relation to potential PPP RM success factors. The survey findings indicate that industry practitioners currently lack a general understanding of concepts and applications of RM, given that it is relatively new in PPP. However, they do think that RM is very important to improve the present performance of PPPs. Future PPP business opportunities can also be increased by effective RM. The top four CSFs for RM are found to be commitment of senior executives, defining the objectives, integration of the different divisions and a multidisciplinary team. However, the relative importance presently assigned for each of the above factors is insufficient, and commitment from senior management is perceived as the most difficult factor to improve.     

Design and construction of lightweight EPS geofoam embedded geomaterial embankment system for control of settlements

This paper presents a research study on a bridge site located along US highway 67 over SH 174 in Cleburne, Texas, where bridge approach slabs have experienced more than 0.4 m (17 in.) of settlement within a span of 16 years after construction. Many treatment methods attempted to mitigate this problem had proven to be ineffective. As part of novel rehabilitation works, the top of existing fill soil on the embankment was replaced with lightweight expanded polystyrene (EPS) geofoam blocks to alleviate the approach slab settlements. This paper describes initial design and construction details of the rehabilitation works performed on the embankment system along with a focus on the early performance details. Field monitoring studies were conducted for almost three years to study the bump/settlements under the EPS geofoam embankment system. Short term measured settlement data was analyzed with hyperbolic model to predict the long term settlements. Numerical finite element studies attempted in this study showed that settlements could be reasonably predicted by modeling these geofoam embankments. Based on the monitoring and modeling studies, the effectiveness of utilizing EPS geofoam as an embankment fill material was addressed to mitigate the differential settlements under a bridge approach slab.     

A review on solar still: a simple desalination technology to obtain potable water

Present review paper presents an overall summarised presentational view of the research work to be discussed on the solar still. The current review paper also includes the infused crisis and struggle for obtaining fresh water for drinking purpose and consumption for other household activities which are a result of the ecological imbalance that has prevailed and is in continuation for past many centuries. It also shows the various tested and applied techniques for freshwater production and their suitability in the usability context in the present scenario of the scarcity of clean water. The use of solar desalination technology is discussed elaborately for a broader consumption to be employed in the current and future works.