Electrochemical removal of chromium from wastewater by using carbon aerogel electrodes

A study has been carried out to determine the feasibility of electrochemical removal of chromium ions from industrial wastewater using carbon aerogel electrodes. In this work the effect of key variables including pH (2-7), concentration 2-8 (mg/l), and charge 0.3-1.3 (A h) was determined. The metal ion removal was significantly increased at reduced pH and high charge conditions. The metal concentration in the wastewater can be reduced by 98.5% under high charge (0.8A h) and acidic conditions (pH 2). The effect of the independent parameters--pH, effluent concentration and charge on the percentage removal was depicted by a quadratic equation obtained using Box-Behnken model. The regression analysis gave a R2 value of 0.9469 shows a close fit between the experimental results and the model predictions. The model was further used to optimise the parameters to maximise the percentage Cr-removal to more than 98%.     

The magnitude of arsenic contamination in groundwater and its health effects to the inhabitants of the Jalangi--one of the 85 arsenic affected blocks in West Bengal, India

To better understand the magnitude of arsenic contamination in groundwater and its effects on human beings, a detailed study was carried out in Jalangi, one of the 85 arsenic affected blocks in West Bengal, India. Jalangi block is approximately 122 km2 in size and has a population of 215538. Of the 1916 water samples analyzed (about 31% of the total hand tubewells) from the Jalangi block, 77.8% were found to have arsenic above 10 microg l(-1) [the World Health Organization (WHO)-recommended level of arsenic in drinking water], 51% had arsenic above 50 microg l(-1) (the Indian standard of permissible limit of arsenic in drinking water) and 17% had arsenic at above 300 microg l(-1) (the concentration predicting overt arsenical skin lesions). From our preliminary medical screening, 1488 of the 7221 people examined in the 44 villages of Jalangi block exhibit definite arsenical skin lesions. An estimation of probable population that may suffer from arsenical skin lesions and cancer in the Jalangi block has been evaluated comparing along with international data. A total of 1600 biologic samples including hair, nail and urine have been analyzed from the affected villages of Jalangi block and on an average 88% of the biologic samples contain arsenic above the normal level. Thus, a vast population of the block may have arsenic body burden. Cases of Bowen's disease and cancer have been identified among adults who also show arsenical skin lesions and children in this block are also seriously affected. Obstetric examinations were also carried out in this block.     

Modelling of probability of failure of concrete columns

This paper predicts the probability of failure or short and long columns of square reinforced concrete for deterministic and probabilistic loads. The effect of various parameters; width, length of column, effective length coefficient, percentage of steel, axial load, grade of concrete and random numbers; on the probability of failure of the column is studied. The material, geometric parameters and the load are treated as probabilistic. The results for short columns show that the rate of decrease of probability of failure is a maximum with increase in width, while it increased to a maximum with increase in loads, whereas for long columns the length of column had the predominant effect.     

Developments in low-cost housing

The co-ordinator of working group W63 shows, in this abridged version of his paper, how several countries have brought a degree of pragmatism to their innovations, which take account of the realities of their situation in terms of material and manpower resources and the level of technology appropriate to their needs.     

Arsenic groundwater contamination and its health effects in the state of Uttar Pradesh (UP) in upper and middle Ganga plain, India: a severe danger

This communication presents results of our 2-year survey on groundwater arsenic contamination in three districts Ballia, Varanasi and Gazipur of Uttar Pradesh (UP) in the upper and middle Ganga plain, India. Analyses of 4,780 tubewell water samples revealed that arsenic concentrations in 46.5% exceeded 10 microg/L, in 26.7%, 50 microg/L and in 10% 300 microg/L limits. Arsenic concentrations up to 3,192 microg//L were observed. The age of tubewells (n=1,881) ranged from less than a year to 32 years, with an average of 6.5 years. Our study shows that older tubewells had a greater chance of contamination. Depth of tubewells (n=3,810) varied from 6 to 60.5 m with a mean of 25.75 m. A detailed study in three administrative units within Ballia district, i.e. block, Gram Panchayet, and village was carried out to assess the magnitude of the contamination. Before our survey the affected villagers were not aware that they were suffering from arsenical toxicity through contaminated drinking water. A preliminary clinical examination in 11 affected villages (10 from Ballia and 1 from Gazipur district) revealed typical arsenical skin lesions ranging from melanosis, keratosis to Bowens (suspected). Out of 989 villagers (691 adults, and 298 children) screened, 137 (19.8%) of the adults and 17 (5.7%) of the children were diagnosed to have typical arsenical skin lesions. Arsenical neuropathy and adverse obstetric outcome were also observed, indicating severity of exposure. The range of arsenic concentrations in hair, nail and urine was 137-10,900, 764-19,700 microg/kg, and 23-4,030 microg/L, respectively. The urine, hair and nail concentrations of arsenic correlated significantly (r=0.76, 0.61, and 0.55, respectively) with drinking water arsenic concentrations. The similarity to previous studies on arsenic contamination in West Bengal, Bihar and Bangladesh indicates that people from a significant part of the surveyed areas in UP are suffering and this will spread unless drives to raise awareness of arsenic toxicity are undertaken and an arsenic safe water supply is immediately introduced.     

Ferrofluid Lubrication of a Journal Bearing Considering Cavitation

Ferrohydrodynamic lubrication in journal bearings by considering cavitation boundary conditions is studied. It is assumed that the magnetization vector is not parallel to the magnetic field vector. Various bearing characteristics have been studied and it is seen that qualitative behavior of these characteristics remains similar to that in the case of non-ferromagnetic fluid. However, a significant quantitative enhancement of these characteristics is observed.     

组态王在风机监控系统中的应用

本文针对通风机监控系统的现状,应用组态王开发了风机的上位机监控系统,主要包括风机运行安全信息的实时监测、显示与报警,监测数据的实时处理与风机性能曲线的绘制,为实现风机的安全、高效自动运行提供了保证。     

Combined quality loss (CQL) concept in WPCA-based Taguchi philosophy for optimization of multiple surface quality characteristics of UNS C34000 brass in cylindrical grinding

The present study highlights a multi-objective optimization problem by applying Weighted Principal Component Analysis (WPCA) coupled with Taguchi method through a case study in cylindrical grinding of UNS C34000 Medium Leaded Brass. The study aimed at evaluating the best process environment which could simultaneously satisfy multiple requirements of surface quality. In view of the fact that traditional Taguchi method fails to solve a multi-objective optimization problem, to overcome this limitation, WPCA has been coupled with Taguchi method. Furthermore, to follow the basic assumption of Taguchi method, i.e., quality attributes should be uncorrelated or independent; which is not always satisfied in practical situation; the study applied WPCA to eliminate response correlation and to evaluate independent or uncorrelated quality indices called principal components which were aggregated by WPCA to compute overall quality index denoted as Multi-Response Performance Index. A combined quality loss was then estimated which was optimized (minimized) finally. The study combined WPCA and Taguchi method for predicting optimal setting. Optimal result was verified through confirmatory test. This indicates application feasibility of the aforesaid methodology proposed for multi-response optimization and off-line control of correlated multiple surface quality characteristics in cylindrical grinding.     

Study of saw-tooth chip in machining of Inconel 718 by metallographic technique

The present research work aims to understand the chip formation mechanisms in Inconel 718 machining through metallographic technique. The influence of machining speed on shear band and chip shape have been analyzed. Characterization of the shear band has been conducted by analyzing the shear band thickness, strain, strain rate, stress and micro-hardness. Additionally, chip reduction coefficient parameters and chip segmentation ratio parameters have been analyzed to understand the type of chip formation at various machining speeds. The observations and analysis of the same indicated that the formation of the saw-tooth chip is due to high-strain localization within the chip and crack initiation at the free surface of the chip. Thinner shear bands are observed at higher machining speed (120 m/min), and thicker shear bands are observed at lower machining speed (40 m/min). The magnitude of chip segmentation parameters indicates that crack generation increases with increase in machining speed.     

A Study of Non-Recessed Hybrid Flexible Journal Bearing With Different Restrictors

For bearings operating under heavy loads, the elastic deformation of bearing surface induced by fluid film pressures can no longer be neglected as it is comparable to the order of magnitude of fluid film thickness. In the present work a theoretical study describing comparative performance of non-recessed hybrid journal bearing using different flow control devices has been carried out by considering bearing shell flexibility into the analysis. The relevant governing equations have been solved using finite element method. The comparative performance of non-recessed hybrid journal bearings of two separate configurations have been studied for various values of bearing flexibility parameter (([Cbar]_d)). The results have been presented for hole-entry type journal bearings compensated by capillary, orifice and constant flow valve restrictors and for a slot-entry type journal bearing, for the same set of values of operating and geometric parameters. The computed results indicates that in order to get an improved performance of non-recessed journal bearing, a proper selection of bearing flexibility parameter (([Cbar]_d)) along with type of flow control device (i.e., capillary, orifice, constant flow valve, slot etc.) and type of bearing configuration (symmetric/asymmetric) are essential.