Process diagnostics using trace alignment: Opportunities, issues, and challenges

Business processes leave trails in a variety of data sources (e.g., audit trails, databases, and transaction logs). Hence, every process instance can be described by a trace, i.e., a sequence of events. Process mining techniques are able to extract knowledge from such traces and provide a welcome extension to the repertoire of business process analysis techniques. Recently, process mining techniques have been adopted in various commercial BPM systems (e.g., BPM|one, Futura Reflect, ARIS PPM, Fujitsu Interstage, Businesscape, Iontas PDF, and QPR PA). Unfortunately, traditional process discovery algorithms have problems dealing with less structured processes. The resulting models are difficult to comprehend or even misleading. Therefore, we propose a new approach based on trace alignment. The goal is to align traces in such a way that event logs can be explored easily. Trace alignment can be used to explore the process in the early stages of analysis and to answer specific questions in later stages of analysis. Hence, it complements existing process mining techniques focusing on discovery and conformance checking. The proposed techniques have been implemented as plugins in the ProM framework. We report the results of trace alignment on one synthetic and two real-life event logs, and show that trace alignment has significant promise in process diagnostic efforts.     

A survey: Ant Colony Optimization based recent research and implementation on several engineering domain

Ant Colony Optimization (ACO) is a Swarm Intelligence technique which inspired from the foraging behaviour of real ant colonies. The ants deposit pheromone on the ground in order to mark the route for identification of their routes from the nest to food that should be followed by other members of the colony. This ACO exploits an optimization mechanism for solving discrete optimization problems in various engineering domain. From the early nineties, when the first Ant Colony Optimization algorithm was proposed, ACO attracted the attention of increasing numbers of researchers and many successful applications are now available. Moreover, a substantial corpus of theoretical results is becoming available that provides useful guidelines to researchers and practitioners in further applications of ACO. This paper review varies recent research and implementation of ACO, and proposed a modified ACO model which is applied for network routing problem and compared with existing traditional routing algorithms.     

Synthesis of Nanocrystalline Lanthanum Strontium Manganite Powder by the Urea–Formaldehyde Polymer Gel Combustion Route

Nanocrystalline lanthanum strontium manganite (LSM) powder has been synthesized by combustion of a transparent gel obtained by the polymerization of methylol urea and urea in a solution containing La³⁺, Sr²⁺, and Mn²⁺ (LSM ions). Chemistry of the transparent urea–formaldehyde (UF) polymer gel formation and structure of the gel have been proposed such that the LSM ions act in between the growing UF polymer chains by interacting through NH, OH, and CO groups by co-ordination and prevent polymer self-assembly through inter-chain hydrogen bonding as evidenced from infrared spectrum. Thermally stable structures formed by the decomposition of UF polymer below 300°C undergo combustion in the presence of nitrate oxidant in a temperature range from 350°–450°C. A perovskite LSM phase has been formed by self-sustained combustion of the dried gel initiated with little kerosene. The powder obtained after deagglomeration and calcination at 600°C for 2 h has a D ₅₀ value of 0.19 μm, and the particles are aggregates of crystallites 10–25 nm in size.     

Choroidal neovascular membrane in Best's vitelliform macular dystrophy

The right eye of a 9-year-old white boy with Best's vitelliform macular dystrophy had an intact egg-yolk lesion and a retinal pigment epithelial defect superiorly, suggesting an early pseudohypopyon stage. The disruptive phase of the left eye showed subretinal hemorrhages, a "signet ring," and a subretinal neovascular membrane.     

Nano and micro structural studies of thin films of ZnO

Zinc oxide thin films grown by sol–gel and RF sputtering methods have been characterized. The characterization techniques used involve ellipsometry, optical absorption, scanning tunneling microscopy, scanning and transmission electron microscopy. The films grown by sol–gel spin method which followed zinc acetate route exhibited a smoother texture than the films, which were deposited by using zinc nitrate route. The later type of films showed a dendritic character. Nano-structured fine grains of size ranging from 20 to 60 nm were observed with zinc nitrate precursor film. Individual grains show a sharp contrast with different facets and boundaries. Crystal planes and lattice parameters calculated by electron diffraction and X-ray diffraction are quite close and in agreement with the reported values in literature. Scanning tunneling microscopy has been used for measuring the average roughness of the surface and estimating the lattice constants. The STM studies of RF sputtered films, although showing a ZnO structure, exhibited a disturbed lattice. This was presumably due to the fact that after deposition the films were not annealed. Nanographs of 2D and 3D view of atomic positions of ZnO have been presented by using scanning tunneling microscopy.     

Corrosion behavior of carbon steel rock bolt in simulated Yucca Mountain ground waters

Medium carbon steel (AISI 1040) was one of the candidate materials for rock bolts to reinforce the borehole liners and emplacement drifts of the high-level nuclear waste repository in Yucca Mountain. The corrosion performance of this structural steel was investigated by techniques such as linear polarization, electrochemical impedance spectroscopy (EIS), and laboratory immersion tests in simulated ground waters. The corrosion rates of the steel were measured for the temperatures in the range from 25 °C to 85 °C, for the ionic concentrations of 1 time (1×), 10 times (10×), and a hundred times (100×) ground water concentration. The steel corroded uniformly at penetration rates of 35 to 200 μm/year in the deaerated waters, and at 200 to 1000 μm/year in the aerated waters. Increasing temperatures in the deaerated waters increased the corrosion rate of the steel. However, increasing ionic concentrations influenced the corrosion rate only slightly. In the aerated 1×and 10×waters, increasing temperatures increased the rates of the steel significantly. In the aerated 100×waters, the corrosion rate increased from 25 °C to 45 °C and decreased at higher temperatures (65 °C and up) due to the formation of oxide/hydroxide films and salt scales on the surface of the steel specimen. The steel suffered pitting corrosion in the both deaerated and aerated hot ground water environments after anodic polarization. This article is based on a presentation made in the symposium “Effect of Processing on Materials Properties for Nuclear Waste Disposition,” November 10–11, 2003, at the TMS Fall meeting in Chicago, Illinois, under the joint auspices of the. TMS Corrosion and Environmental Effects and Nuclear Materials Committees.     

Searching for points-to analysis

The points-to analysis problem is to find the pointer relationships that could arise during program execution. Many points-to analysis algorithms exist, each making a particular trade off between cost of the analysis and precision of the results. In this paper, we show how points-to analysis algorithms can be defined as transformed versions of an exact algorithm. We present a set of program transformations over a general program model and use them to define some existing points-to analysis algorithms. Doing so makes explicit the approximations involved in these algorithms. We also show how the transformations can be used to define new points-to analysis algorithms. Our transformations are generic and may be useful in the design of other program analysis algorithms.     

Influence of Liquid Phase Additives on Structural and Sintering Behaviour of Samarium Modified Lead Titanate Ceramics

The combination of metal oxides Bi₂O₃:Li₂O in a ratio 89:11 gives a eutectic with a melting point of ～680°C. Such a low melting point oxide combination creates a working liquid phase at a highly favorable temperature for use as a densification aid. A liquid—phase sintering aid incorporating Bi₂O₃ and Li₂O is presented which demonstrates not only a reduction in the required sintering temperature but also shows relatively higher ‘c/a’ ratio (tetragonality) of PbTiO₃ ceramics with no fragility of the samples. Detailed dilatometric investigations have been performed in order to study the dominant shrinkage mechanism in the present system. Besides acting as a liquid phase fluxing agent, Bi₂O₃/Li₂O also behave as Curie shifter, which decreases Curie temperature in lead titanate system. The Curie temperature has also been verified from the thermal expansion behavior of sintered specimens. The value of dielectric constant increases after poling which may be due to the dominance of 180° domain wall over 90°.     

Improved Routh-Pade/spl acute/ approximants: a computer-aided approach

A geometric programming based computer-aided method to derive a reduced order (rth-order) approximant for a given (stable) SISO linear continuous-time system is presented. In this method, stability and the first r time moments/Markov parameters are preserved as well as the errors between a set of subsequent time moments/Markov parameters of the system and those of the model are minimized.     

Laser composite surfacing of AISI 304 stainless steel with titanium boride for improved wear resistance

The present study concerns development of a hard in situ boride-dispersed composite layer on the surface of AISI 304 stainless steel substrate to improve the wear resistance property. Laser processing was carried out by melting the surface of sand-blasted AISI 304 stainless steel substrate using a continuous wave CO₂ laser and simultaneous deposition of a mixture of K₂TiF₆ (potassium titanium hexafluoride) and KBF₆ (potassium hexafloroborate) (in the weight ratio of 2:1) using Ar as shrouding environment. Powder feed rate was maintained constant at 4 g/min. Irradiation results in dissociation of a pre-deposited mixture along with a part of the stainless steel substrate, intermixing and rapid solidification to form the composite layer on the surface. The micro-structure of composite layer consists of dispersion of titanium boride particles in AISI 304 stainless steel matrix. Volume fraction of particles is found to be uniform throughout the composite layer, though varied with laser parameters. The micro-hardness of the surface was improved 250–350 VHN as compared to 220 VHN of the AISI 304 stainless steel substrate with a significant improvement in wear resistance property. The mechanism of wear was found to be a combination of adhesive and abrasive in as-received stainless steel. However, it was predominantly abrasive for laser composite surfaced stainless steel.