高含硫钻井液缓蚀剂的合成及性能研究

本文合成了抑制H₂S腐蚀的咪唑啉类缓蚀剂,并研究了它们的性能。正交试验表明,最佳合成条件是:反应温度:190～200℃;酸:胺(mol比)=1:1.05;反应时间以3～5小时为宜。根据以上条件合成的缓蚀剂,在含有3200mg/lH₂S的泥浆中,用量为0.2%时,抑制效果能达到80～90%,与碱式碳酸锌复配使用时,能提高缓蚀效率和降低碱式碳酸锌的用量,并发现缓蚀剂与CaO之间具有明显的协同效应。泥浆流变性能试验表明,缓蚀剂能提高泥浆的动切力和动塑比,对失水量影响不大。此外,利用X-射线衍射试验证明:(1)低碳钢在含H₂S的泥浆中,腐蚀产物的主要组成为Fe₉S₆;(2)H₂S会破坏FCLS的稳定性,分解出Fe²⁺,与H₂S反应生成面心立方的Fe₂S₄。     

用于重离子核反应实验测量的纵向电场气体电离室

本文报道了一种新型的大动态范围，多叠层探测器系统组件之一的纵向电场气体电离室的构造，性能和在中能得离子核反应实验中的应用。     

~（60）Co辐照对聚四氟乙烯表面润湿性的影响

研究了具有低表面能的氟聚合物聚四氟乙烯（ＰＴＦＥ），经６０Ｃｏγ射线辐照后表面状态的变化，以及其对液体介质蒸馏水的润湿性。较详细地论述了辐照后表面粗糙度、结晶度以及表面化学基因等不同因素对ＰＴＦＥ表面润湿性的影响。通过对ＰＴＦＥ及其表面的红外、Ｘ光衍射，表面粗糙度的分析，弄清了辐照后ＰＴＦＥ表面化学基团的改变对有机氟聚合物表加的润湿性影响很大，而粗糙度和结晶度的变化对润湿性影响较小。     

GL—2型Φ600mm螺旋选别攀枝花钛铁矿生产实践

攀矿选钛厂设计采用传统的螺旋选矿设备ＦＬＸ一１型φ６００ｍｍ螺旋选矿机和φ１２００ｍｍ螺旋溜槽，从选矿（铁）厂磁选尾矿物料中回收原生粒状钛铁矿积累了多年生产实践经验。而广东有色金属研究院研制的ＧＬ一２型φ６００ｍｍ螺旋选矿机具有处理能力大、分选效率高、选别粒级宽、不需冲洗水及占地面积小等特点，有取代选钛厂目前使用的螺旋选矿设备之趋势。     

6M32(51)氮氢气压缩机系统的技术改造

1 机组简介 6M32(51)-190/320-BX型氮氢气压缩机的基础件采用德国博尔格公司的专有技术,具体参数如下: 压缩介质:氮氢气,压缩级数:6级;转速:375rpm;行程:320mm,轴功率:2920kW,容积流量:190m~3/min;气量调节:回路调节,冷却填料润滑油:1.95 kg/h;重量:主机69.45t,     

Comparisons of PWM and one-cycle control for power amplifier with multilevel converter

Based on the concepts of cascade multilevel converters and one-cycle technique, comparisons are conducted to characterize the distortion of the pulsewidth modulation (PWM) and one-cycle control methods that were applied to converters. Simulation results for the different control schemes are obtained in PSIM software initially to see the effect of one-cycle control different from that of PWM control. Through the comparisons, the advantages and disadvantages are identified for each method. The one-cycle scheme is better than PWM control in reducing undesirable harmonics and tracing dynamic waveforms. Simulation and experimental results are also provided to verify the conclusions.     

Non‐reflecting artificial boundaries for transient scalar wave propagation in a two‐dimensional infinite homogeneous layer

This paper presents an exact non‐reflecting boundary condition for dealing with transient scalar wave propagation problems in a two‐dimensional infinite homogeneous layer. In order to model the complicated geometry and material properties in the near field, two vertical artificial boundaries are considered in the infinite layer so as to truncate the infinite domain into a finite domain. This treatment requires the appropriate boundary conditions, which are often referred to as the artificial boundary conditions, to be applied on the truncated boundaries. Since the infinite extension direction is different for these two truncated vertical boundaries, namely one extends toward x →∞ and another extends toward x→‐ ∞, the non‐reflecting boundary condition needs to be derived on these two boundaries. Applying the variable separation method to the wave equation results in a reduction in spatial variables by one. The reduced wave equation, which is a time‐dependent partial differential equation with only one spatial variable, can be further changed into a linear first‐order ordinary differential equation by using both the operator splitting method and the modal radiation function concept simultaneously. As a result, the non‐reflecting artificial boundary condition can be obtained by solving the ordinary differential equation whose stability is ensured. Some numerical examples have demonstrated that the non‐reflecting boundary condition is of high accuracy in dealing with scalar wave propagation problems in infinite and semi‐infinite media. Copyright © 2003 John Wiley & Sons, Ltd.