An iterative ADI-FDTD with reduced splitting error

We present a new iterative alternating-direction-implicit finite-difference time-domain (ADI-FDTD) method. By recognizing the ADI-FDTD method as a special case of a more general iterative approach to solve the Crank-Nicolson (CN) FDTD scheme, the splitting error in ADI-FDTD can be reduced systematically. Numerical examples are used to illustrate the improved accuracy of this method.     

美国、加拿大城市规划与建设考察报告

为扩大我省工程咨询业在国外的影响,进一步加强工程咨询企业的国际合作,学习和借鉴发达国家在城市规划与建设领域的先进理念和经验,受美国、加拿大相关部门的的邀请,经省发展改革委批准,由江苏省工程咨询协会组织的业内领导及工程咨询专业技术骨干赴美国、加拿大考察团一行9人,于6月15日至27日对美国、加拿大城市规划与建设情况进行了学习考察.     

Fabrication of multi-walled carbon nanotube reinforced polyelectrolyte hollow nanofibers by electrospinning

Hybrid hollow multi-walled carbon nanotubes (MWCNTs)/polyelectrolytes (PE) nanofibers were prepared by a combination of the electrospinning method and layer-by-layer (LbL) technique. The mixed polystyrene (PS)/MWCNTs nanofibers were obtained by electrospinning method, which were employed as templates to self-assembly multilayered polyelectrolytes by LbL technique. Hollow MWCNTs/PE nanofibers were obtained by selectively removed part of the template: PS, which is confirmed by Raman spectra, transmission electron microscopy (TEM) and scanning electron microscopy (SEM).     

Effects of contact shape on biological wet adhesion

Wet adhesion is widely adopted in biological adhesion systems in nature. Wet adhesion is studied in this paper with the focus on the effect of different contact shapes (flat, concave, convex, and ring-like) on the adhesion force. The evolution of the liquid bridge between a fiber tip and substrate during the detaching process shows two transition points. The first transition from the radius-controlled to the contact-angle controlled process is critical to influence the strength and robustness of adhesion. We show that a concave shape is more effective than a flat one, while a convex shape has no advantage. A ring-like contact shape has advantages in a hydrophobic environment and on a rough surface.     

软件无线电中采样率转换技术的实现及在3G中的应用

目前移动通信标准繁多,且新旧体制混杂,很难做到统一.为了实现互连互通,目前比较可行的方法是采用软件无线电.采样率转换技术是实现互连互通的关键.文中针对第三代移动通信系统(3G)中不同通信体制的带宽、速率要求,根据分级变换的思想,对3G中的CDMA2000和TDSCDMA的采样率转换方案进行了设计,并对3G中的5种制式的采样率转换方案进行了分析比较.实验表明,这一方案可以在采样率变换的高效网络结构基础上进一步降低滤波运算量和存储量.     

Dynamic bandwidth allocation for multimedia traffic with rate guarantee and fair access in WCDMA systems

Packet scheduling in a WCDMA system poses a new challenge due to its nature of variable bit rates and location-dependent, time-varying channel conditions. In this work, three new downlink scheduling algorithms for a WCDMA base station are proposed to support multimedia transmissions. Using a credit management and a compensation mechanism, our algorithms provide rate guarantee and fair access to mobile terminals. In particular, we propose to allow a user to simultaneously use multiple OVSF codes in a time-sharing manner, which we call a multicode, shared model. Using multiple codes allows us to compensate those users suffering from bad communication quality or even errors. The proposed schemes can tolerate a multistate link condition (compared to the typically assumed two-state, or good-or-bad, link condition) by adjusting the number of OVSF codes and the spreading factor of each code. Simulation results show that the proposed schemes do achieve higher bandwidth utilization while keeping transmission delay low.     

卧式厚箔剪切机下刀摆动的消除方法

介绍了一种当前铝加工设备中常见的卧式厚箔剪切机.重点分析了其中剪切装置的工作原理,并就其缺陷提出改进方案.     

延长测井电缆使用寿命的方法探讨

由于对测井电缆机械性能缺乏了解,使用不规范,使测井电缆使用寿命降低.通过对测井电缆结构、制造工艺进行分析,进一步掌握其性能,提出通过正确安装、使用前需进行稳定化处理、在使用中注意控制起下速度、日常清洁润滑、定期对电缆进行维护保养等方法维持铠装层正常状态,减少层间摩擦力,不扭曲,缆芯通断良好等方法,从而延长电缆的使用寿命.     

无线局域网的安全解决方案

本文描述了无线局城网中的认证和密钥管理协议,CCMP认证加密协议。IEEE 802.11依赖于IEEE 802.1x 来支持认证和密钥管理服务,更进一步的,四次握手协议用来建立分组传输的数据加密密钥。IEEE 802.11i也定义了认证者更新一个组暂时密钥(GTK)给请求者的组密钥握手,这样请求者可以接收广播消息。