基于FPGA的ASI信号接收与发送的实现

提出了一种用FPGA芯片代替Cypress公司的CY78933和CY78923芯片来实现ASI信号接收与发送的方案，详细阐述了DVB—ASI接口的硬件组成与FPGA实现，该接口符合DVB—ASI的接口规范，可实现270Mbps的信号传输，已经得到实际运用。     

An Improved Immune Genetic Algorithm for Solving the Optimization Problems of Computer Communication Networks

1　IntroductionIndesigningacomputercommunicationnet work ,thenetworkaveragedelayisanimportantpa rameterinthenetworkperformance .Inthispaper,weonlyconsiderM /M/1networks,whichmeansthatthemessageprocessingtimeisaprobabilisticdensityfunctionwithnegativepower,thegroupar rivalandsendingisofPoissiondistributionwithasinglequeue .Supposethatthenetworktopologicalstructureandtheestimatesoftheexternaltrafficrequirementsaregiven ,howtoselecttheoptimalroutestobeusedbythecommunicatingnodesinthenetworksoast…     

Gamma-irradiation-induced Ag/SiO2 composite films and their optical absorption properties

Small Ag particles or clusters dispersed mesoporous SiO₂ composite films were prepared by a new method: First the matrix SiO₂ films were prepared by sol-gel process combined with the dip-coating technique, then they were soaked in AgNO₃ solutions followed by irradiation of γ-ray at room temperature and in ambient pressure. The structures of these films were examined by X-ray diffraction (XRD), high-resolution transmission electron microscope (HRTEM), and optical absorption spectroscopy. It has been shown that the Ag particles grown within the porous SiO₂ films are very small, and they are isolated and dispersed from each other with very narrow size distributions. With increasing the soaking concentration and an additional annealing, an opposite peakshift effect of the surface plasmon resonance (SPR) was observed in the optical absorption measurements.     

流量比对等离子体基团分布和薄膜结构的影响

使用光强标定的发射光谱(AOES)测量了CHF3／C6H6混合气体的微波电子回旋共振(ECR)放电等离子体中基团的分布状态。实验发现随着CHF3流量的增加，成膜基团CF、CF2、CH等的相对密度增大，而刻蚀基团F的密度也会增加，从而使得a—C：F薄膜的沉积速率降低。同时红外吸收谱(IR)分析表明，在高CHF3流量下沉积的a—C：F薄膜中含有更高的C—F键成分。可见在a—C：F薄膜的制备中CHF3／(CHF3 C6H6)流量比是重要的控制参量。     

GMSK无线接收终端设计

设计了GMSK(Gauss Minimum Shift Keying，高斯最小频移键控)无线接收终端的硬件与软件系统。硬件的射频电路对空中信号进行接收与滤波，再由以MX589构成的解调模块解调，输出数字信号；数字硬件以单片机GMS97L5为核心。软件系统设计了对IC卡AT88SCl608加密卡的认证以及对串行数据的接收与处理的中断程序。终端系统接收数据快、性能稳定。     

光通信技术发展的新亮点

自光通信问世以来，经历了研究探索、实用化、推广应用、快速发展等时期，直至2001年，达到急剧发展的高潮。随着世界经济的滑坡，通信行业的不景气，使光通信也进入了寒冷的冬天。实际上，即使在经济低速的时期，光通信的技术依然没有停止发展，而且出现了不少继续将光通信推向前进的新亮点。从技术和应用的角度，简要介绍一些光通信的新技术。     

Contact stresses in an infinite plate containing a smooth circular insert under thermal load

Summary. A solution is presented for the contact problem with a smooth circular elastic insert in an infinite, linearly elastic plate under thermal load. The thermal load considered here includes the temperature gradient applied at infinity and a uniform temperature change. One of the major difficult parts in solving the present problem is that separation may occur between an insert or inclusion and the surrounding matrix under a nonuniform expansion of the matrix and the insert due to a temperature change. Based on the complex potential theory and the method of analytical continuation, the problem is reduced to a singular integro-differential equation which is solved numerically. Results are presented for the contact angle and for the normal and circumferential stresses at the plate-insert interface. Exact solutions are found for the current problem for a special case when the material properties of the plate and the insert are identical.     

天然气吸附储存脱附过程的动态模拟

通过热动力学计算,认识了脱附过程当中储罐内温度剖面分布的典型特征:储罐轴心处的温度下降幅度最大。分析了脱附过程当中储罐壁的热交换、吸附剂的导热系数以及储罐内的初始压力对储罐内的温度剖面的影响。结论是加强储罐外壁的热交换、增大吸附剂的导热系数皆能改善吸附储罐内的温度剖面。     

Modeling and performance evaluation of a cellular mobile network

An analytic model of cellular mobile communications networks with instantaneous movement is investigated in this paper. This cellular mobile network is showed to be equivalent to a queueing network and furthermore the equilibrium distribution of this cellular mobile network is proved to have a product form. The explicit expressions for handoff rates of calls from one cell to another, the blocking probability of new calls and handoff calls are then obtained. Actual call connection time (ACCT) of a call in this cellular mobile network is characterized in detail, which is the total time a mobile user engages in communications over the network during a call connection and can be used to design appropriate charging schemes. The average ACCT for both complete call and incomplete call, as well as the probability for a call to be incomplete or complete, are derived. Our numerical results show how the above measures depend on the new call arrival process for some specific reserved channels numbers in each cell. The results presented in this paper are expected to be useful for the cost analysis for updating location and paging in cellular mobile network.     

光学材料的激光微加工研究进展与应用前景

综述了国内外在光学材料激光微加工方面的研究成果和应用状况，并展望了其发展前景。