软X射线对血液有形成分表面电荷的影响——2、淋巴细胞和血小板膜电荷的变化

软X射线不仅能引起红细胞表面电荷的变化,同时也能导致淋巴细胞和血小板表面电荷下降,表现为照射后它们的电泳率下降。低剂量范围内,这种电荷的变化是暂时性的,照后4小时降到最低点,24小时后恢复到对照的水平。细胞电泳率的下降与辐射剂量相关。淋巴细胞是一个复杂的细胞群,正常状态下,按细胞在电场中泳动速度的快慢,可分为两个组分:快峰为T细胞,慢峰为B细胞。软X射线照射以后,T和B细胞的电泳率皆减慢,频数分布峰值下降,离散度加大。血小板成分单一,电泳率较一致。 从照射浓集的血小板再加回自身血浆中电泳率的下降较照射血浆再加到血小板中的电泳率下降大得多;受照射的血小板在磷酸缓冲液中电泳率下降较在血浆悬液中严重得多;2000 rad照后,悬浮于血浆中的血小板电泳率能恢复,而悬浮于磷酸缓冲液中则不能恢复,三个方面来看,血浆中可能存在抗辐射因子。超氧化物岐化酶能有效地预防血小板电泳率的下降,从而可阻止血小板的凝聚。     

��ԭ����φ118mm�����꾮�̾�����

作为一项钻井新技术，小眼井钻井可大幅度降低钻井成本,正愈来愈受到国内外各油气田的重视。小眼井钻井技术在中原油田主要用于φ139.7mm套管开窗侧钻井裸眼段的钻进，根据中原油田20余口φ139.7mm套管开窗侧钻井的钻井实践，探讨了中原油田φ118mm井眼钻 井的若干技术问题，其中包括钻头选择、钻井参数的优选、钻具组合和轨迹控制、固井技术及井下复杂情况和事故处理技术等。     

MODELING OF WATER DYNAMICS AND POLLUTANT SPREADING IN THE LUOMAHU RESERVOIR FOR WATER TRANSFER FORM SOUTH TO NORTH OF CHINA

1 .　ＩＮＴＲＯＤＵＣＴＩＯＮＷａｔｅｒＴｒａｎｓｆｅｒＦｒｏｍＳｏｕｔｈＴｏＮｏｒｔｈＰｒｏｊｅｃｔ(ＷＴＦＳＴＮＰ)ｉｓａｇｒｅａｔｄｅｃｉｓｉｏｎｔｏｓｏｌｖｅｔｈｅｐｒｏｂｌｅｍｏｆｗａｔｅｒｓｈｏｒｔａｇｅｉｎｔｈｅｎｏｒｔｈａｎｄｃｅｎｔｒａｌｐａｒｔｓｏｆＣｈｉ ｎａ .Ｔｈｉｓｐｒｏｊｅｃｔ ,ｉｎｃｌｕｄｉｎｇＥａｓｔ ,Ｃｅｎｔｒａｌ ａｎｄＷｅｓｔ Ｌｉｎｅ ,ｗｉｌｌｄｒａｗｗａｔｅｒｆｒｏｍｔｈｅＹａｎｇｔｚｅＲｉｖｅｒｔｏｔｈｅｎｏｒｔｈａｎｄｃｅｎｔｅｒｏｆＣｈｉｎａｓｏｔｈａ…     

企业培训中心的六个主要特征

提出企业培训中心的本质特征,并以此为基点阐述企业培训中心的六个主要特征;通过对企业培训中心的使命、培训对象的确定、培养目标、培训内容、组织设置、组织发展的分析,力求揭示企业培训中心组织构建和发展的自身规律。     

The Synthesis of Sulfated Titanium Oxide Nanotubes

TiO₂ nanotubes can be prepared in gram quantities by treating anatase TiO₂ powder with concentrated NaOH solution. These TiO₂ nanotubes acquired strong acidity after being impregnated with sulfuric acid solution and calcined at 300 °C. The anatase TiO₂ powder used to prepare the nanotube did not catalyze the esterification between cyclohexanol and acetic acid, while sulfated TiO₂ nanotubes were very reactive toward the esterification reaction.     

数据增值业务在DVB中的实现

首先对DVB标准作了简单介绍，然后讨论了在数字电视系统中实现增值业务，最后给出了一个实例。     

用于机器人轨迹定位纠正系统的回声状态神经网络研究

循环神经网络(RecurrentNeuralNetworks)是人工神经网络(ArtificialNeuralNetworks)中重要的分支,与前馈神经网络(ForwardNeuralNetworks)相比具有更好的时间序列学习能力。但长期以来其学习法一直不能脱离前馈神经网络而自成一体,回声状态神经网络(EchoStateNetworks(ESN))是打破这一局面的全新学习方法。其独特的结构,良好的短期记忆能力,方便的学习方法,不俗的非线性特性是以前循环神经网络所不可比的。本文在介绍了回声状态神经网络之后将其用于四轮机器人的位置测量系统中,有良好的表现。     

Amorphous diffusion bonding of steel pipe and its impact toughness

An iron-based amorphous foil (FeNiCrSiB) was used as an interlayer for the amorphous diffusion bonding of low carbon steel pipes under argon flux. The microstructure and mechanical properties of the joint were analyzed using an electron probe micro-analyzer (EPMA), tensile test, bending test and impact test. The results show that the joint microstructure resembles that of the base metal and no precipitates form at the joint. Melting point depressants (B, Si) diffuse far away from the joint and the base metal element is homogenous across the joint. The joint impact toughness is greater than the base metal toughness and the mechanical properties of the joint are similar around the pipe.     

Fabrication of multi-walled carbon nanotube reinforced polyelectrolyte hollow nanofibers by electrospinning

Hybrid hollow multi-walled carbon nanotubes (MWCNTs)/polyelectrolytes (PE) nanofibers were prepared by a combination of the electrospinning method and layer-by-layer (LbL) technique. The mixed polystyrene (PS)/MWCNTs nanofibers were obtained by electrospinning method, which were employed as templates to self-assembly multilayered polyelectrolytes by LbL technique. Hollow MWCNTs/PE nanofibers were obtained by selectively removed part of the template: PS, which is confirmed by Raman spectra, transmission electron microscopy (TEM) and scanning electron microscopy (SEM).