微重力落塔电磁悬吊、释放技术研究

论述了微重力落塔电磁悬吊、释放、提升机构的关键技术,电磁释放过程的特性分析以及微重力落塔实际试验的情况。分析说明:悬吊、释放性能的好坏决定了试验落舱的微重力水平,也是微重力落塔试验能否成功的关键技术。     

回归分析法简化钻爆设计

以某工程钻爆参数为例,阐述了在地下工程掘进施工中,应用回归分析法建立钻爆参数的相关模型,并利用此模型帮助建立某断面钻爆方案.     

倾斜水塔的爆破拆除

针对某部倾斜水塔的定向爆破拆除,从防止水塔倾倒偏移和筒体触地冲击地面对周围环境造成影响等不利情况,确定爆破方案和采取相应的防护措施.     

检测GIS局部放电现象甚高频技术

文中介绍一种采用频率合成技术对GIS腔体内放电所产生的甚高频响应进行检测的UHF测量设备，该设备可接收到-110dBm以上的L波段放电信号，并已经通过实际测试。     

10t双电葫芦吊车的改造

介绍了 10t双电葫芦吊车在使用过程中出现的问题 ,提出改造方案     

空气中^131I的取样和测量方法的研究

本文介绍一种气态和气载~(131)I 取样器。着重介绍了一种指数分布源的效率刻度方法,讨论了与取样有关的一些问题。     

步进电机在红外系统扫描机构中的应用

介绍了在红外系统中，采用步进电机作为扫描机构驱动元件，以Ｄ／Ａ数模转换器作细分方式的定频脉宽调制驱动方式，实现微机控制下的扫描机的构步距均匀稳定，满足红外系统分辨率的要求。     

浅议岩石锚杆基础的设计

岩石锚杆基础能充分利用岩石地基的坚固性以及钢材抗拉强度高的特点,达到结构安全的技术要求,且具有减少开挖量、节省混凝土、减轻劳动量,工程造价低的优越性。文章结合若干工程实例,介绍了几种岩石锚杆基础形式,提出了在应用岩石锚杆基础中应注意的问题。     

Adiabatic shear bands on the titanium side in the titanium/mild steel explosive cladding interface: Experiments, numerical simulation, and microstructure evolution

The microstructure and microtexture in adiabatic shear bands (ASBs) on the titanium side in the titanium/mild steel explosive cladding interface are investigated by means of optical microscopy, scanning electron microscopy/electron backscattered diffraction (SEM/EBSD), and transmission electron microscopy (TEM). Highly elongated subgrains and fine equiaxed grains with low dislocation density are observed in the ASBs. Microtextures (25 deg, 75 deg, 0 deg), (70 deg, 45 deg, 0 deg), and (0 deg, 15 deg, 30 deg) formed within the ASBs suggest the occurrence of the recrystallization. The grain boundaries within ASBs are geometrically necessary boundaries (GNBs) with high angles. Finite element computations are performed to obtain the effective strain and temperature distributions within the ASBs under the measured boundary conditions. The rotation dynamic recrystallization (RDR) mechanism is employed to describe the kinetics of the nanograins’ formation and the recrystallized process within ASBs. During the deformation time (about 5 to 10 μs), the following processes take place: dislocations accumulate to form elongated cell structures, cell structures break up to form subgrains, and subgrains rotate and finally form recrystallized grains. The small grains within ASBs are formed during the deformation and do not undergo significant growth by grain boundary migration after deformation.     

微带天线RCS缩减技术及分析方法

分析了微带天线ＲＣＳ（雷达散射截面）缩减的物理机制，对典型的ＲＣＳ缩减技术进行了综述，评论了几种计算微带天线ＲＣＳ的理论方法，指出了微带天线ＲＣＳ研究中值得探索的若干问题。