Adsorption characteristics of hexadecyl ammonium with different numbers of carbon chains in montmorillonite and the structure of the prepared composites

Journal of Porous Materials - The dynamics and thermodynamics of adsorption of hexadecyl ammonium with different numbers of carbon chains in montmorillonite (Mt) with different layer charge density...     

钢丝绳张紧装置在大行程拖链上的应用

介绍了给DY3000×20m数控机床大行程拖链增设的张紧装置,该装置解决了拖链无法自动复位的问题,使用方便、经济可行。     

Effect of sulfate on Cu(Ⅱ) sorption to polymer-supported nano-hydrated ferric oxides: Experimental and modeling studies

Incorporating of hydrous ferric oxide(HFO) inside porous supports with large sizes has become an effective way to decontaminate the water from heavy metals. Ubiquitous anions like sulfate are usually present in high concentrations in water, and might greatly affect adsorption behavior of hybrid HFO. Here, a polymer-based HFO-CPS was fabricated by encapsulating nano-HFO inside a chloromethylated polystyrene polymer(CPS) and the reactivity of HFO-CPS with Cu(Ⅱ) was evaluated in the presence of sulfate ions.Surface complexation theory was firstly employed to describe the effect of sulfate on Cu(Ⅱ) adsorption edges of hybrid HFO-CPS, where constant capacitance model(CCM) was adopted. The available weak adsorption site Fe_((2))OH of hybrid HFO-CPS was found to decrease from 20% Fe to 5% Fe, which might be caused by the pore plugging effect after HFO encapsulation. With the assumption that a ternary complex was formed, the effect of sulfate on Cu(Ⅱ) adsorption by HFO-CPS were successfully described by CCM using the optimized Fe_((2))OH site under different sulfate concentrations(1 or 10 mmol·L~(-1)) and Cu/Fe ratios(0.0042 or 0.0252). It is confirmed that the formation of Fe OHCu SO_4 ternary surface complexes played an important role in enhancing Cu(Ⅱ) adsorption on HFO-CPS in the presence of sulfate.     

一种IPMSM无位置传感器系统设计的新方法

针对内置式永磁同步电机IPMSM(interior permanent-magnet synchronous motor),本文给出一种新的无位置传感器系统设计方案.由转子永磁磁链角的估计值和同步坐标系下定子磁链的代数模型得到定子磁链的估计值,经旋转变换后与静止坐标系下由定子电压、电流积分模型得到的定子磁链进行比较形成反馈闭环来抑制积分漂移,并利用两者的叉积经锁相环得到IPMSM转子转速和位置的估计值.与已有的EEMF状态观测器方法相比较,本文所提方法简单且有更好的动态和静态估计性能.最后通过仿真和实验验证了所提算法的可行性和有效性,试验中为提高系统在低速下的性能,对逆变器的非线性进行了补偿.     

ZrO2制备方法研究进展

以ZrO₂为活性组分或载体的催化剂,在酚类定向催化转化中具有较高的研究价值。总结了ZrO₂的各种制备方法,包括溶胶-凝胶法、共沉淀法、水热法、表面活性剂辅助法、静电纺丝法、热解法、多元醇还原法、反相微乳法和超临界合成法等。阐述了各种方法的反应原理,详细比较了不同制备方法的优劣,并具体分析了制备方法对催化剂结构及性能的影响。     

Preparation of High Strength and Toughness Aramid Fiber by Introducing Flexible Asymmetric Monomer to Construct Misplaced-Nunchaku Structure

High performance fibers with high strength and toughness have great potential in composites, but contradiction between tensile strength and elongation at break makes the preparation to become a current challenge. Herein, an asymmetric structure of more flexible diamine, 3,4′-diaminodiphenyl ether (3,4′-ODA), is introduced into heterocyclic aramid (PBIA) fibers to replace rigid symmetric p-phenylenediamine (PDA). By studying the properties of copolymer (mPEBA) fibers with different ratios of diamine, it is found that the mPEBA fiber reached the optimal mechanical properties with the 30% content of 3,4′-ODA. Compared with homopolymerized heterocyclic aramid fibers, the tensile strength and elongation at break of mPEBA fiber are improved by 26.2% and 38.7%, respectively. Results of X-ray diffraction show that the introduction of 3,4′-ODA structure can increase stretchability of mPEBA fibers, improving the orientation degree during hot-drawing. Molecular dynamics simulations confirm that 3,4′-ODA structure undergoes a conformation transformation to form a straightened chain during hot-drawing, while symmetrical 4,4′-diaminodiphenyl ether (4,4′-ODA) cannot form the same conformation. The misplaced-nunchaku structure is formed based on the special meta-para position of 3,4′-ODA, achieving the synergy of high strength and high toughness.     

Room-Temperature Solid-State Lithium Metal Batteries Using Metal Organic Framework Composited Comb-Like Methoxy Poly(ethylene glycol) Acrylate Solid Polymer Electrolytes

Solid polymer electrolyte with good thermal stability and flexibility is an excellent candidate for solid-state lithium metal batteries, while its low ionic conductivity caused by high crystallinity limits its application at ambient temperature. Here a metal organic framework (zeolitic imidazolate framework-8, ZIF-8) composited comb-like methoxy poly(ethylene glycol) acrylate polymer electrolyte (MCPE) with high ionic conductivity (9.96 × 10⁻⁵ S cm⁻¹ at 30 °C) is prepared by an in situ UV polymerization method. The as-prepared MCPE exhibits improved mechanical property due to the introduction of porous ZIF-8 nanofillers, which is beneficial to suppress the growth of lithium dendrites. Consequently, the LiFePO₄||MCPE||Li cells show a high capacity of 116 mAh g⁻¹ at 30 °C and 0.5 C, and maintain 89.4% of initial capacity after 150 cycles with the average Coulombic efficiency of 99.9%. These results demonstrate that the MCPE shows great potential in solid-state lithium metal batteries near room temperature.     

Degradable Superhydrophilic Iron-Pillared Bentonite Doped with Polybutylene Adipate/Terephthalate Open-Cell Foam: Its Application in Dye Degradation,Removal of Heavy Metal Ions,and Oil–Water Separation

Development of industrialization has brought convenience to people's lives; however, it has also brought serious harm to the environment, where, water pollution is the most obvious. Here, a polybutylene adipate terephthalate (PBAT) open-cell foam doped with iron-pillared bentonite (IPB) is prepared by using sugar as a pore-forming agent and solution phase separation, and then combined with a solution dipping method to coat the foam surface with a polyacrylamide/SiO₂, which makes the PBAT foam superhydrophilic. The static adsorption effect of superhydrophilic IPB-doped PBAT open-cell foam on methylene blue (MB) and Cu²⁺ is studied. The adsorption isotherm fitting shows that the adsorption conforms to the Langmuir model and it has biased toward monolayer adsorption. The adsorption kinetics fitting confirms that the adsorption process is in line with the pseudo-second-order adsorption model, which is dominated by chemical adsorption. The modified PBAT open-cell foam has an adsorption effect on Cu²⁺; however, it has weak cyclic adsorption capacity. It shows a good cyclic adsorption ability for the cationic dye MB and it has >95% photodegradation efficiency of the MB after five time's cyclic adsorption. The superhydrophilicity makes the foam to have better applications in oil–water separation.     

Facile Modification of Biochar Derived from Agricultural Straw Waste with Effective Adsorption and Removal of Phosphorus from Domestic Sewage

Journal of Inorganic and Organometallic Polymers and Materials - In recent decades, straw waste is the major byproduct around agriculture that has become one of the factors of environmental...     

First-Principles Investigation of the Interfacial Stability,Precipitate Formation,and Mechanical Behavior of Al3Li/Al3Zr/Al Interfaces

Metallurgical and Materials Transactions A - Precipitates including Al3Li, Al3Zr and core–shell structured Al3Li (Al3Zr) produce significant strengthening effects in Al-Li alloys by means of...