Nanoscratch testing to assess the fiber adhesion of short‐carbon‐fiber composites

In a composite material, the degree of adhesion between the fiber and the matrix plays an important role in the overall performance of the material. Because the load between the fiber and the matrix is realized throughout the interphase region material, a lot of effort has gone into characterizing the strength of the interphase. In this study, nanoscratch tests on the composite samples were used to provide a relative measure of adhesion in different composite materials. Carbon‐filled nylon 6,6 and polycarbonate resins were evaluated with this method. The carbon fillers we used were polyacrylonitrile‐based carbon fibers sized and surface‐treated for the respective matrix and pitch‐based carbon fibers without any sizing or surface treatment. Tensile and X‐ray photoelectron spectroscopy data for the composites we considered are also presented to compare to the nanoscratch results. It is shown that nanoscratch testing on the composites, with the proposed data analysis, can be an effective tool for determining the relative degree of adhesion between different composites. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 328–335, 2007     

Size and Shape Effects for Gamma Prime in Alloy 738

Cast IN-738 and wrought Inconel 738 are generic applications for most metallurgical designers of gas turbine blades in the Power Generation Industry on a worldwide basis... Particularly, where first stage buckets are concerned. This is the case because both alloy types exhibit outstanding creep and stress rupture properties to provide an extended service period in a harsh environment. Typically, Alloy 738 is fired in the turbine at 1970 °F (1074 °C) which is about 0.9T _m where T _m represents the melting temperature... A very demanding service temperature, indeed. Furthermore, Alloy 738 is expected to endure this high temperature for a duration of 26,000 h at base load before being retired (R) or replaced (R′) or reused (R′′) issues are ever considered. When these three (3) problems (R-R′-R′′) are brought before a given Materials Review Board for appropriate debate, many pro and con arguments are always evident because (1) Gas turbine blades are not inexpensive and (2) The threat of field failures with possible product liability litigation is of maximum interest to all gas turbine repair shop personnel. The intent of this paper is show how gamma prime precipitate particles can be better examined and more efficiently evaluated using a new characterization method. This research is offered as a contribution to the sum of total knowledge.     

Synthesis of nanodispersed oxides of vanadium, titanium, molybdenum, and tungsten on mesoporous silica using atomic layer deposition

The advantages of the atomic layer deposition (ALD) method for preparation of tungsten, vanadium, titanium, and molybdenum oxide catalyst supported on mesoporous silica are discussed, with emphasis on the importance of synthesis conditions on dispersion, structure and activity of the resulting materials. A suite of complementary techniques such as DRS-UV/Vis, BET, ¹H-NMR, XRD, and TEM were used to study the structural properties of the supported metal oxides, and probe reactions such as 2-butanol dehydration and ethanol partial oxidation were used to demonstrate the potential advantages of the ALD-prepared catalysts. Specifically, highly dispersed oxides of titanium, molybdenum, and tungsten oxide on mesoporous silica were synthesized using the ALD method. It is also demonstrated that attainment of high dispersions of vanadium oxide on mesoporous silica requires the presence of at least a single layer of titanium oxide due to the well-known poor interaction between vanadia and silica. The highly dispersed catalysts prepared here by ALD methods exhibited superior catalytic performance relative to those prepared using conventional incipient wetness impregnation.     

Electrophoretic Deposition of YSZ Particles on Non-Conducting Porous NiO–YSZ Substrates for Solid Oxide Fuel Cell Applications

This paper reports a method of performing electrophoretic deposition (EPD) on non-conducting substrates overcoming the requirement of a conducting substrate through the use of porous substrates. The conductivity of the substrate is therefore no longer a limiting factor in the application of EPD. This method is applicable to the fabrication of thick or thin layers of ceramic or metal for various applications. As an example, thin and dense yttria-stabilized zirconia (YSZ) layers have been deposited on a non-conducting NiO–YSZ substrate by EPD from a non-aqueous suspension. A solid oxide fuel cell constructed on these sintered bilayers exhibited power densities of 384 and 611 mW/cm² at 750° and 850°C, respectively.     

Mechanism of paper wet strength development by polycarboxylic acids with different molecular weight and glutaraldehyde/poly(vinyl alcohol)

In our previous research, we found that crosslinking paper using poly(carboxylic acid)s with different molecular weight or using the combination of glutaraldehyde and poly(vinyl alcohol) (PVA) significantly improved the wet strength of the paper. In this research, we studied the mechanism of paper wet strength development using crosslinking systems with different molecular weight by measuring scanning electron microscopic (SEM) images, wet strength, folding endurance, wet thickness, water retention, and Z‐direction tensile strength of the treated paper. The paper crosslinked by a high‐molecular weight (MW) poly(carboxylic acid) shows more swelling by water than that crosslinked by a low‐MW polycarboxylic acid in the SEM micrographs even though both treated paper samples have similar wet strength. Thus, the data suggest that high‐MW poly(carboxylic acid)s promote the formation of interfiber crosslinking. Crosslinking paper by glutaraldehyde, a crosslinking agent of small molecular size, improves wet strength and reduces flexibility and swellability of paper because of the formation of intrafiber crosslinking. Combining glutaraldehyde with PVA as a coreactant increases wet strength and also retains flexibility and swellability of the treated paper because of the formation of interfiber crosslinking. The hypothesis that PVA reacts with glutaraldehyde to form a polymeric pentanedialated‐PVA crosslinking system and promotes the formation of interfiber crosslinking on the paper is supported by the data of wet strength, folding endurance, wet thickness, water retention, and Z‐direction tensile strength of the treated paper. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 277–284, 2006     

Measurement of soybean fatty acids by near-infrared spectroscopy: Linear and nonlinear calibration methods

A key element of successful development of new soybean cultivars is availability of inexpensive and rapid methods for measurement of FA in seeds. Published research demonstrated applicability of NIR spectroscopy for FA profiling in oilseeds. The objectives of this study were to investigate the applicability of NIR spectroscopy for measurement of FA in whole soybeans and compare performance of calibration methods. Equations were developed using partial least squares (PLS), artificial neural networks (ANN), and support vector machines (SVM) regression methods. Validation results demonstrated that (i) equations for total saturates had the highest predictive ability (r ²=0.91–0.94) and were usable for quality assurance applications, (ii) palmitic acid models (r ²=0.80–0.84) were usable for certain research applications, and (iii) equations for stearic (r ²=0.49–0.68), oleic (r ²=0.76–0.81), linoleic (r ²=0.73–0.76), and linolenic (r ²=0.67–0.74) acids could be used for sample screening. The SVM models produced significantly more accurate predictions than those developed with PLS. ANN calibrations were not different from the other two methods. Reduction in the number of calibration samples reduced predictive ability of all equations. The rate of performance degradation of SVM models with sample reduction was the lowest.     

Synthesis of Organotin Polyamine Ethers Containing Acyclovir and their Preliminary Anticancer and Antiviral Activity

Organotin polyamine ethers containing acyclovir in their backbone were synthesized in moderate to high yield employing the aqueous interfacial polycondensation system. The products are high molecular weight polymers. Infrared spectroscopy of the products shows new bands characteristic of the formation of Sn–N and Sn–O bonds consistent with the proposed structure. MALDI-TOF MS below 2000 Da shows the presence of organotin and acyclovir units containing these two moieties. The products show moderate inhibition of a number of cancer cell lines and exhibit the ability to inhibit a number of viruses, particularly the herpes simplex virus-1 and varicella zoster virus that are responsible for herpes, chicken pox and shingles.     

Synthesis, thermal stability, light emission, and fluorescent photopatterning of poly(diphenylacetylene)s carrying naphthalene pendant groups

Naphthalene (Nap)-containing poly(diphenylacetylene)s with different spacer lengths (-{C₆H₅CC[C₆H₄O(CH₂)_mO-Nap]}_n-; P1(m), m = 4, 6, 8) are synthesized. The monomers are prepared by etherifications of 1,m-dibromoalkanes with 1-naphthol and 1-(4-hydroxy)phenyl-2-phenylacetylene and are polymerized by TaCl₅-n-Bu₄Sn and WCl₆-Ph₄Sn catalysts. Whereas the tantalum-based catalyst gives insoluble products in low yields, the tungsten-based catalyst furnishes soluble polymers with high molecular weights (M_w up to 5.0 × 10⁴) in satisfactory yields (up to 62%). The structures and properties of the polymers are characterized and evaluated by IR, NMR, TGA, UV, PL, and EL analyses. All the polymers are thermally stable: while the polymers lose 5% of their weights at ∼420 °C under nitrogen, no decreases in molecular weights are found after they have been annealed at 200 °C for 2 h in air. When their THF solutions are photoexcited, the polymers emit strong green lights with high efficiencies (up to 98%). No significant shifts in the photoluminescence spectra are observed when the polymers are cast into thin solid films, suggestive of little involvement of aggregative or excimeric emission. A multilayer EL device with a configuration of ITO/P1(8):PVK/BCP/Alq₃/LiF/Al is constructed, which emits a green light of 520 nm with a maximum external quantum efficiency of 0.16%. The spectral stability is outstanding: no recognizable change is observed in the EL spectrum when the device current is raised. Irradiation of a film of P1(8) through a mask photooxidizes and quenches the emission of the exposed regions, resulting in the formation of two-dimensional luminescent photopatterns.     

The role of clay network on macromolecular chain mobility and relaxation in isotactic polypropylene/organoclay nanocomposites

It is well known that a so-called “three-dimensional filler network structure” will be constructed in the polymer/layered silicate nanocomposites when the content of layered clay reaches a threshold value, at which the silicate sheets are incapable of freely rotating, due to physical jamming and connecting of the nanodispersed layered silicate. In this article, the effect of such clay network on the mobility and relaxation of macromolecular chains in isotactic polypropylene(iPP)/organoclay nanocomposites was investigated in detail with a combination of DMTA, DSC, TGA, TEM, rheometry and melt flow index measurements. The main aim is to establish a relationship between the mesoscopic filler network structure and the macroscopic properties of the polymer nanocomposites, particularly to explore the role of the clay network on the mobility and relaxation of macromolecular chains. It was found that the nanodispersed clay tactoids and layers play less important or dominant roles on the mobility of iPP chains depending on the formation of percolating filler network. The turning point of macroscopic properties appeared at 1 wt% organoclay content. Before this point, the effect of organoclay can be negligible, and the increase of chain mobility was ascribed to the decrease of molecular weight of polymer chains, as commonly occurs during dynamic melt processing; after this point, however, a reduced mobility of chains and a retarded chain relaxation were observed and attributed to the formation of a mesoscopic filler network. The essential features of such a mesoscopic organoclay network were estimated and discussed on the basis of stress relaxation and structural reversion measurements. A schematic model was proposed to describe the different relaxation and motion behaviors of macromolecular chains in the unfilled polymer and the filled hybrids with partial and percolated organoclay networks, respectively.