“Predissociation and Preionization Lifetimes of Polyatomic Ions in the Gas Phase”

Experimental results concerning predissociations of polyatomic positive ions in the gas phase are reviewed. These include the observation of “metastable” ions; photoionization efficiency curves; “metastable” ion decay curves and isotope effects. Examples are given for the three cases of predissociation. Predissociation by vibration is treated in greater detail and the data are compared with predictions of the quasi-equilibrium theory (QET). Results concerning preionization of polyatomic negative ions are also included. The theoretical treatment of this problem is presented and discussed. Suggestions are made as to possible future developments in this field.     

Tomographic reconstruction of incompressible flow

In many experiments facilitating tomography the reconstruction problem is under-determined, meaning there are many possible solutions consistent with the measurements. If the sampling rate is fast relative to the typical evolution time, the known physical dynamics of the system can be used as additional reconstruction constraints. Here we demonstrate that incorporating the requirement of incompressible flow can improve significantly the fidelity of the reconstructed sequence. The incompressibility of the reconstruction is assured by requiring the conservation of the density moments. It is demonstrated that the "incompressible" reconstruction can be significantly more accurate than the reconstruction using standard methods. A consequence of the density moments' conservation is the conservation of the density histogram throughout the reconstructed sequence.     

C3N—A 2D Crystalline,Hole‐Free,Tunable‐Narrow‐Bandgap Semiconductor with Ferromagnetic Properties

Graphene has initiated intensive research efforts on 2D crystalline materials due to its extraordinary set of properties and the resulting host of possible applications. Here the authors report on the controllable large‐scale synthesis of C₃N, a 2D crystalline, hole‐free extension of graphene, its structural characterization, and some of its unique properties. C₃N is fabricated by polymerization of 2,3‐diaminophenazine. It consists of a 2D honeycomb lattice with a homogeneous distribution of nitrogen atoms, where both N and C atoms show a D_6h‐symmetry. C₃N is a semiconductor with an indirect bandgap of 0.39 eV that can be tuned to cover the entire visible range by fabrication of quantum dots with different diameters. Back‐gated field‐effect transistors made of single‐layer C₃N display an on–off current ratio reaching 5.5 × 10¹⁰. Surprisingly, C₃N exhibits a ferromagnetic order at low temperatures (<96 K) when doped with hydrogen. This new member of the graphene family opens the door for both fundamental basic research and possible future applications.     

Carbon Dots as Fillers Inducing Healing/Self‐Healing and Anticorrosion Properties in Polymers

Self‐healing is the way by which nature repairs damage and prolongs the life of bio entities. A variety of practical applications require self‐healing materials in general and self‐healing polymers in particular. Different (complex) methods provide the rebonding of broken bonds, suppressing crack, or local damage propagation. Here, a simple, versatile, and cost‐effective methodology is reported for initiating healing in bulk polymers and self‐healing and anticorrosion properties in polymer coatings: introduction of carbon dots (CDs), 5 nm sized carbon nanocrystallites, into the polymer matrix forming a composite. The CDs are blended into polymethacrylate, polyurethane, and other common polymers. The healing/self‐healing process is initiated by interfacial bonding (covalent, hydrogen, and van der Waals bonding) between the CDs and the polymer matrix and can be optimized by modifying the functional groups which terminate the CDs. The healing properties of the bulk polymer–CD composites are evaluated by comparing the tensile strength of pristine (bulk and coatings) composites to those of fractured composites that are healed and by following the self‐healing of scratches intentionally introduced to polymer–CD composite coatings. The composite coatings not only possess self‐healing properties but also have superior anticorrosion properties compared to those of the pure polymer coatings.     

Reducing milking frequency from thrice to twice daily in early lactation improves the metabolic status of high-yielding dairy cows with only minor effects on yields

Reducing milk production during early lactation might be of interest to improve the energy balance (EB) of high-yielding dairy cows. Therefore, the objective of this study was to determine how reducing the milking frequency (MF) of high-yielding dairy cows from thrice to twice a day during the first 30 d in milk (DIM) affects yields, intake, efficiency, metabolic status, and carryover effects. To this end, 42 multiparous cows were divided into 2 groups according to their previous lactation performance, parity, and body weight. The control cows were milked 3 times a day (3ML) and the treated cows were milked twice a day (2ML) until 30 DIM and then both groups were milked 3 times a day. Milk samples were taken twice a week from 2 or 3 consecutive milkings until 45 DIM for analysis of milk solids, and both groups were followed until 100 DIM to determine the carryover effects of MF until 30 DIM. Individual dry matter intake (DMI), milk yield, and body weight were recorded daily. Blood samples were taken 3 times weekly from 14 d prepartum until 45 DIM. Milk yield during the first 30 DIM was 8.6% higher (49.3 and 45.4 kg/d, respectively), milk fat percentage was lower (3.96 and 4.27%, respectively), and the yields of all milk solids were higher in the 3ML cows than in the 2ML cows. Dry matter intake and 4% fat-corrected milk were similar between groups. The EB during the first 30 DIM was lower in the 3ML cows than in the 2ML cows, and milk yield, but not 4% fat-corrected milk yield, per unit of DMI was higher in the 3ML cows. No differences were observed between groups from 31 to 100 DIM in milk yield (～56.3 kg/d for both groups), milk solids yield, DMI, or milk/DMI; however, fat percentage was lower and EB was higher in the 3ML cows. Blood glucose concentrations between 0 and 30 DIM were lower and β-hydroxybutyrate concentrations were higher in the 3ML cows than in the 2ML cows, but nonesterified fatty acids concentrations were lower, which may be attributed to the lower clearance frequency of nonesterified fatty acids from the blood stream in the 2ML cows. A lower proportion of the 3ML cows (10%) ovulated ≤15 DIM compared with the 2ML cows (40%), with no beneficial effects on preovulatory follicle characteristics. Reducing the MF from thrice to twice a day during the first 30 DIM improved EB and metabolic status, with only minor effects on production.     

Cover Image,Volume 100, Issue 11

The cover image is based on the Research Article The Israeli Palestinian wheat landraces collection: restoration and characterization of lost genetic diversity by Sivan Frankin et al., https://doi.org/10.1002/jsfa.9822 .

     

Scaling of SEU mapping and cross section, and proton induced SEU atreduced supply voltage

New experimental study of heavy ion and proton induced SEU at reduced voltage (i.e. reduced critical charge) reveals interesting results. It is shown that the heavy ion cross section and microprobe mapping scale like the threshold LET and the parameter, which is almost invariant under bias changes, is the effective charge collection depth. For studying proton induced SEU and surface-barrier-detector spectra we use protons with energies from 5.6 to 300 MeV. The results are analyzed in view of the processes involved in low energy deposition by protons. Detailed calculations show the importance of straggling in proton direct ionization which might be the leading process in very sensitive devices like photodiodes     

(Pb1–xCdx)S Nanoparticles Embedded in a Conjugated Organic Matrix,as Studied by Photoluminescence and Light‐Induced X‐ray Photoelectron Spectroscopy

Elliptically shaped (Pb_1–xCd_x)S nanoparticles (NPs) of average size 2.3 × 2.9 nm (minor axis × major axis) have been prepared via reaction of a solid [oligo(p‐phenylene‐ethynylene) dicarboxylate]Pb_0.9Cd_0.1 salt matrix, with gaseous H₂S. A significantly long emission lifetime, with multi‐exponential behavior, is detected in time‐resolved photoluminescence measurements, substantially different from the decay patterns of pure PbS and CdS NPs within the same organic matrix. Evidence for the co‐existence of Cd and Pb within the same particle is provided by light‐induced X‐ray photoelectron spectroscopy.     

Core/Shell PbSe/PbS QDs TiO2 Heterojunction Solar Cell

Quasi type‐II PbSe/PbS quantum dots (QDs) are employed in a solid state high efficiency QD/TiO₂ heterojunction solar cell. The QDs are deposited using layer‐by‐layer deposition on a half‐micrometer‐thick anatase TiO₂ nanosheet film with (001) exposed facets. Theoretical calculations show that the carriers in PbSe/PbS quasi type‐II QDs are delocalized over the entire core/shell structure, which results in better QD film conductivity compared to PbSe QDs. Moreover, PbS shell permits better stability and facile electron injection from the QDs to the TiO₂ nanosheets. To complete the electrical circuit of the solar cell, a Au film is evaporated as a back contact on top of the QDs. This PbSe/PbS QD/TiO₂ heterojunction solar cell produces a light to electric power conversion efficiency (η) of 4% with short circuit photocurrent (J_sc) of 17.3 mA/cm². This report demonstrates highly efficient core/shell near infrared QDs in a QD/TiO₂ heterojunction solar cell.     

Preferred Link Based Distributed Adaptive Routing in Wavelength Routed Optical Network

As the WDM technology matures and the demand for bandwidth increases, dynamic provisioning of lightpaths at the WDM layer becomes an important and challenging problem. In this paper, we consider the problem of dynamic routing and wavelength assignment in wavelength-routed optical networks. The conventional approach to this problem is to select a route from a set of candidate routes, which has a common wavelength available on all the links of the route. In this paper, we propose a distributed algorithm which selects a route based on the state of the network (called preferred link approach). In this approach, a route is selected link by link based on a preference value given to each of the links. We propose three different heuristic functions for calculating the preference of the links, depending on the cost and congestion on the links. We evaluate our routing algorithm in terms of call acceptance ratio, cost of the path, hop length, and call setup time. Our experimental results suggest that our algorithm not only out performs the existing methods with respect to average call acceptance ratio, but, also improves the fairness among different hop connections, which is an important result in the case of WDM optical networks.