特种加工线切割机床智能渐进式走丝控制方案及控制器硬件电路设计

针对特种加工设备中走丝线切割机床升级改造需求大,成本高的问题,提出了一种低成本的设备改造方案。在不增加硬件投资的前提下,提出了精粗加工渐进使用电极丝的改造方案,并设计出智能渐进走丝控制器的硬件电路原理图和PCB板。通过与相关厂家的合作改造表明,该智能渐进走丝控制方案和硬件电路能够最大限度的降低改造成本,并能提升机床的加工精度、表面光洁度和加工的一致性。     

Stress Mechanism about Field Lightning Surge of High Voltage BJT Based Line Driver for ADSL System

In this paper, we have verified stress root caused by lightning surge in High voltage BJT based line driver of ADSL telecommunication and created failure mechanism. To reproduce damages in Line driver, we have applied STD surge waveform in operating condition, which is specified in IEC-6000-4-5, to component and board level. Visual isolation for Damage root was conducted with Real-time Electrical Stress Analysis (RTESA) utilizing Photon Emission Microscopy (PEM). The surge made with input of Tx output created junction breakdown of amplifier, which is made of HVBJT cells, and also caused current crowding from Vcc (supply voltage). In case of Positive pulse, current crowding was observed from between Collector and Vcc (+)12V. For negative pulse, at between Emitter and Vee (−)12V, current crowding was found. For both cases, device damage level was the same. All of these could be considered as transient latchup phenomenon created in BJT cell. Applying temporary clamping diode to line driver Tx, we have conducted Board level surge injection test. As a result, with the correlation between surge level from component level reproduction test and the one from system level, we have decided field lightning surge damage level and set up line driver protection margin.     

电流控制模式Boost电路分岔的数值分析

研究了电流模式下Boost DC/DC变换器,以电感电流作为分岔参数的分岔混沌现象,通过数值计算得出不同电容值下的分岔图,从而验证了理论分析的可靠性。     

A lightweight,self‐adaptive lock gate designation scheme for data collection in long‐thin wireless sensor networks

Constrained by the physical environments, the long‐thin topology has recently been promoted for many practical deployments of wireless sensor networks (WSNs). In general, a long‐thin topology is composed of a number of long branches of sensor nodes, where along a branch each sensor node has only one potential parent node toward the sink node. Although data aggregation may alleviate excessive packet contention, the maximum payload size of a packet and the dynamically changing traffic loads may severely affect the amount of sensor readings that may be collected along a long branch of sensor nodes. In addition, many practical applications of long‐thin WSNs demand the exact sensor readings at each location along the deployment areas for monitoring and analysis purposes, so sensor readings may not be aggregated when they are collected. This paper proposes a lightweight, self‐adaptive scheme that designates multiple collection nodes, termed lock gates, along a long‐thin network to collect sensor readings sent from their respective upstream sensor nodes. The self‐adaptive lock gate designation scheme balances between the responsiveness and the congestion of data collection while mitigating the funneling effect. The scheme also dynamically adapts the designation of lock gates to accommodate the time‐varying sensor reading generation rates of different sensor nodes. A testbed of 100 Jennic sensor nodes is developed to demonstrate the effectiveness of the proposed lock gate designation scheme. Copyright © 2011 John Wiley & Sons, Ltd.     

Effect of multiple reflows on interfacial reaction and shear strength of Sn-Ag electroplated solder bumps for flip chip package

The effect of displacement rate and intermetallic compound (IMC) growth on the shear strength of electroplated Sn-2.5Ag (in wt.%) flip chip solder with Cu under-bump metallization (UBM) were investigated after multiple reflows. Cu₆Sn₅ IMC was formed at the interface after one reflow. After five reflows, two different IMC layers, consisting of a scallop-shaped Cu₆Sn₅ phase and a planar Cu₃Sn phase, and their thicknesses increased with increasing reflow number up to 10. The shear strengths peaked after four reflows, and then decreased with increasing reflow number. Increasing displacement rate increased the shear force. The tendency toward brittle fracture characteristics was intensified with increasing displacement rate and reflow number.     

Panorama field rendering with scene depth estimation

A novel approach to image-based modelling and rendering is proposed. A set of randomly placed panoramas and omnidirectional depth information of the surrounding scene are used to generate an output image at a vantage viewpoint. Implementation results show that the proposed approach achieves smooth walkthrough at a realtime     

Mergers and Acquisitions in the Telecommunications Industry: Myths and Reality

This paper investigates how market participants react to mergers and acquisitions (M&As) involving telecommunications companies. The empirical evidence suggests that such activities convey bad news to the market. This is consistent with the synergy trap hypothesis and extant empirical findings of value‐reducing diversification strategies in recent literature. The evidence also indicates that a cross‐border, rather than a domestic M&A deal, is the main driver of the negative market reaction. Further, our evidence of negative impacts on the bidder's business after an M&A reinforces our main finding that market participants, on average, perceive M&A activities to be detrimental to shareholder value. This suggests that value creation or synergy through an M&A deal is not warranted even though it can generate an increase in size of the firm.     

Digital Laser Micropainting for Reprogrammable Optoelectronic Applications

Structural coloration is closely related to the progress of innovative optoelectronic applications, but the absence of direct, on-demand, and rewritable coloration schemes has impeded advances in the relevant area, particularly including the development of customized, reprogrammable optoelectronic devices. To overcome these limitations, a digital laser micropainting technique, based on controlled thin-film interference, is proposed through direct growth of the absorbing metal oxide layer on a metallic reflector in the solution environment via a laser. A continuous-wave laser simultaneously performs two functions—a photothermal reaction for site-selective metal oxide layer growth and in situ real-time monitoring of its thickness—while the reflection spectrum is tuned in a broad visible spectrum according to the laser fluence. The scalability and controllability of the proposed scheme is verified by laser-printed painting, while altering the thickness via supplementary irradiation of the identical laser in the homogeneous and heterogeneous solutions facilitates the modification of the original coloration. Finally, the proof-of-concept bolometer device verifies that specific wavelength-dependent photoresponsivity can be assigned, erased, and reassigned by the successive application of the proposed digital laser micropainting technique, which substantiates its potential to offer a new route for reprogrammable optoelectronic applications.     

受激布里渊散射(SBS)中的三类介质

介绍了目前使用的三类受激布里渊散射介质的化学结构及其SBS性能．并且分析了受激布里渊散射对介质的要求，