全封闭转子式CO2压缩机的开发

使用天然制冷剂的制冷系统在全世界范围内受到了越来越多的关注。CO2(R744)制冷剂重新兴起，它无毒、不可燃，并且作为工业生产过程中的副产品而被广泛应用。然而，CO2系统的工作压力要比其它使用诸如HCFC、HFC、HFC混合制冷剂的系统高得多。因此，有必要开发可在这种高压下高效、可靠运行的压缩机。一种适应这一要求的双级全封闭式滚动活塞压缩机现已研发成功。其外径尺寸为207．8mm、高445．8mm、容积为21．8cc。在第一级中，吸入气体被压缩到7～8MPa；在第二级中，气体被压缩至11～12MPa。在压缩机的研发过程中，机壳、轴承和曲轴的设计为其关键因素。     

Evolutionary Fuzzy ARTMAP Neural Networks and their Applications to Fault Detection and Diagnosis

In this paper, two mutation-based evolving artificial neural networks, which are based on the Fuzzy ARTMAP (FAM) network and evolutionary programming, are proposed. The networks utilize the knowledge base extracted from a set of data to perform search and adaptation. The performances of the two networks are assessed using benchmark problems, with the results analyzed and discussed. The effects of the network parameters are evaluated through a parametric study. The applicability of the networks is also demonstrated using a real fault detection and diagnosis task in a power generation plant. The experimental results consistently indicate the usefulness of the proposed evolutionary FAM-based networks in yielding good classification performances with parsimonious network structures.     

Effect of curing moisture on the indentation force deflection of flexible polyurethane foam

The moisture effect on the indentation force deflection (IFD) of flexible polyurethane foam was examined through the curing of the foam with different moisture contents. The employed foam was cured at 30, 40, 50, 60, 70, and 80% relative humidity, and the corresponding curing temperature was constant at 23°C. The experiments showed that the measured IFD and support factor of the flexible polyurethane foam decreased, and the hysteresis increased with the curing moisture. A statistical conversion formula was generated experimentally to correct the measured IFD of the flexible polyurethane foam to eliminate the deviation caused by the moisture effect. The measured IFD was inversely exponentially proportional to the curing moisture. The accuracy of the correction formula was verified by the conditioning of the foam again with different moisture contents. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1679–1682, 2007     

Cysteine‐Rich Antifungal Proteins from Filamentous Fungi are Promising Bioactive Natural Compounds in Anti‐Candida Therapy

The emerging number of life‐threatening invasive fungal infections caused by drug‐resistant Candida strains urges the need for the development and application of fundamentally new and safe antifungal strategies in the clinical treatment. Recent studies demonstrated that the extracellular cysteine‐rich and cationic antifungal proteins (crAFPs) originating from filamentous fungi, and de novo designed synthetic peptide derivatives of these crAFPs provide a feasible basis for this approach. This mini‐review focuses on the global challenges of the anti‐Canidia therapy and on the crAFPs as potential drug candidates to overcome existing problems. The advantages and limitations in the use of crAFPs and peptide derivatives compared to those of conventional antifungal drugs will also be critically discussed.     

Optimization and evaluation of reduced graphene oxide hydrogel composite as a demulsifier for heavy crude oil-in-water emulsion

The rising production of produced water from oilfields had been proven to bring detrimental environmental effects. In this study, an efficient, recyclable, and environmental-friendly reduced graphene oxide immobilized κ-Carrageenan hydrogel composite(κCa GO) was fabricated as an alternative sorbent for crude oil-in-water demulsification. Polyethyleneimine(PEI) was employed to form a stable hydrogel composite. The conditions for the immobilization of graphene oxide(GO) on PEI-modified κ-Carrageenan(κC) beads were optimized appropriately. An immobilization yield of 77% was attained at 2% PEI, 2 h immobilization activation time, and p H6.5. Moreover, the synthesized κCa GO is capable of demulsification with an average demulsification efficiency of 70%. It was found that the demulsification efficiency increases with salinity and κCa GO dosage, and it deteriorates under alkaline condition. These phenomena can be attributed to the interfacial interactions between κCa GO and the emulsion. Furthermore, the κCa GO can be recycled to use for up to six cycles without significant leaching and degradation. As such, the synthesized κCa GO could be further developed as a potential sorbent substitute for the separation of crude oil from produced water.     

Synthesis and Characterization of NiO Nano‐Spheres by Templating on Chitosan as a Green Precursor

In this study, nickel oxide was prepared through the calcination of extrusion dripped chitosan/nickel nitrate beads. The morphology and structural properties of the products were studied using various characterization techniques. Uniformly distributed nickel oxide was formed as observed from the studies of surface morphology where the processing parameters play a huge role on the resulting morphology. TEM results have shown that nickel oxide with crystallite sizes of 10–30 nm was obtained. The Fourier‐transform infrared spectra studies show an intense peak at 525 cm^?1, which is attributed to the vibration of Ni–O bond. Furthermore, the XRD results show NiO diffraction peaks correspond to (111), (200), (220), (311), and (222) which indicates that a bunsenite structure with a face‐centered cubic phase was produced in this study. The usage of 500°C as the lower limit in this study is justified due to the complete removal of the templating material as seen in the thermalgravimetric analysis studies. Furthermore, it was obtained that the largest surface area of nickel oxide synthesized using this technique is 48.024 m²/g with pore sizes of 19.843 nm. The usage of chitosan as a green template for the synthesis of nanoparticles has shown promising results which allows a more economical and sustainable approach for the fabrication of nanomaterials.     

Formulation and Characterization of Novel Nanostructured Lipid Carriers with Photoprotective Properties Made from Carnauba Wax,Beeswax, Pumpkin Seed Oil,and UV Filters

Pumpkin seed oil (PSO) with carnauba wax and beeswax was used to develop nanostructured lipid carriers (NLC) loaded with a UV filter, Uvinul® A Plus B. The aims of the study were to optimize the concentration of PSO to develop a stable NLC formulation, determine storage stability of the NLC with and without PSO, and the synergistic effect of PSO-NLC with UV filter for photoprotective properties. The physical properties of NLC were optimized based on the mean particle size, polydispersity index, and storage stability. The optimized NLC consisted 10% lipid phase (3.5% carnauba wax, 3.5% beeswax, and 3.0% PSO) and 90% aqueous phase. After optimization, Uvinul® A Plus B was added in the optimized PSO-NLC to produce a photoprotective formulation. Uvinul® A Plus B consisted of both UVA (Diethylamino Hydroxybenzoyl Hexyl Benzoate) and UVB (Ethylhexyl Methoxycinnamate) filters. The NLC produced with PSO and Uvinul® A Plus B had mean particle size of 135 ± 2 nm and showed good physical stability under storage time. Besides that, the NLC produced also proven to have positive effect in enhancing the entrapment efficiency and drug loading, which were 82.86 ± 0.15% and 55.41 ± 0.04%, respectively, and showed sun protection factor value of 16.61 ± 3.45. The results indicated the presence of synergistic effect among the PSO-NLC with Uvinul® A Plus B.     

Machining and Ceramic/Ceramic Joining to Form Internal Mesoscale Channels

Ceramics and semiconducting materials with internal channels are crucial in a variety of diverse technologies such as "lab on a chip," fuel cell applications, and cooling of microelectronics. In this paper, techniques for fabricating internal channels in brittle materials first are reviewed. Then, the mechanical machining of surface channels in 99.99% pure alumina partially sintered at 600°C and 700°C is discussed. After machining, the partially sintered alumina is sintered to a density of about 97% of theoretical and then joined to 96% pure alumina to convert the surface channels into internal channels.     

Rapid Repair of Earthquake Damaged RC Interior Beam-wide Column Joints and Beam-wall Joints Using FRP Composites

This paper studies the seismic performance of FRP-strengthened RC interior non-seismically detailed beam-wide columns and beam-wall joints after limited seismic damage.Four eccentric and concentric beam-wide column joints and two beam-wall joints,initially damaged in a previous study,were repaired and tested under constant axial loads(0.1fc′Ag and 0.35fc′Ag) and lateral cyclic loading.The rapid repair technique developed,aimed to restore the original strength and to provide minimum drift capacity.The repair...