Authentication and correction of digital watermarking images

A novel function for image watermarking is introduced. The proposed function gives a restoration/correction capability to image watermarking as well as the detection and localisation of alterations. The basic idea of the proposed watermarking technique is to adopt conventional error control coding techniques for generating a watermark.     

Transient interstitial fluid flow in brain tumors: Effect on drug delivery

The presence of high interstitial pressure within the tumor's center [Baxter, L.T., Jain, R.K., 1989. Transport of fluid and macromolecules in tumors I role of interstitial pressure and convection. Microvascular Research 37, 77-104] poses severe problems to chemotherapy via systemic administration. Removal of the tumor core by surgery and subsequent insertion of drug-carrying polymers in the resection cavity may improve the treatment [Wang, C.H., Li, J., 1998. Three dimensional simulation of IgG delivery to tumors. Chemical Engineering Science 53 (20), 3579-3600]. The operation establishes a favorable pressure gradient towards the center of the tumor and thus creates flow reversal immediately after the operation. The simulation results of the transient flow field of interstitial fluid in the surgical cavity of a brain tumor are presented. The simulation is carried out using a computational fluid dynamics software, Fluent, with the model geometry constructed from magnetic resonance images (MRI) with reference to the Gliadel^® wafers application [Sampath, P., Brem, H., 1998. Implantable slow-release chemotherapeutic polymers for the treatment of malignant brain tumors. Cancer control. Journal of Molecular and Cellular Cardiology 5 (2), 130-137]. The coupled mass and momentum equations are solved for the steady-state solutions of the pressure and velocity distributions at a cut section of a tumor. The steady-state solution thus obtained is then perturbed to compute the characteristic time scale of the variation in the interstitial fluid pressure and velocity in a surgical cavity immediately after surgery. Simulation results show that the flow field reaches an equilibrium state in less than 3 h. The surgery produces a transient enhancement of the drug delivery but the surgery alone is not capable of removing permanently the unfavorable pressure gradient against the delivery of drug to tumor. The presence of post-surgery edema increases the interstitial pressure and fluid velocity, thus causing higher relative toxicity in the surrounding normal tissues. Simulations employing complete 3D structure show qualitatively similar results with 2D simulation and hence the use of a cut section of the tumor for simplified model calculations is validated.     

A collaborative wheelchair system.

This paper describes a novel robotic wheelchair, and reports experiments to evaluate its efficiency and understand how human operators use it. The concept at the heart of the collaborative wheelchair assistant (CWA) is to rely on the user's motion planning skills while assisting the maneuvering with flexible path guidance. The user decides where to go and controls the speed (including start and stop), while the system guides the wheelchair along software-defined guide paths. An intuitive path editor allows the user to avoid dangers or obstacles online and to modify the guide paths at will. By using the human sensory and planning systems, no complex sensor processing or artificial decision system is needed, making the system safe, simple, and low-cost. We investigated the performance of the CWA on its interaction with able-bodied subjects and motion efficiency. The results show that path guidance drastically simplifies the control. Using the CWA, the wheelchair user needs little effort from the first trial, while moving efficiently with a conventional wheelchair requires adaptation.     

Lipase‐catalyzed production of medium‐chain triacylglycerols from palm kernel oil distillate: Optimization using response surface methodology

Optimization of lipase‐catalyzed esterification for the production of medium‐chain triacylglycerols (MCT) from palm kernel oil distillate and glycerol was carried out in order to determine the factors that have significant effects on the reaction system and MCT yield. Novozyme 435 from Candida antarctica lipase was found to have the highest activity at 52.87 ± 0.03 U/g. This lipase also produced the highest MCT yield, which is 56.67%. The effect of different variables on MCT synthesis was studied with a two‐level five‐factor fractional factorial design. The various variables include (1) reaction temperature, (2) enzyme load, (3) molecular sieves concentration, (4) reaction time and (5) molar substrate ratio. Reaction temperature, reaction time and molar substrate ratio strongly affect MCT synthesis (p <0.05). However, enzyme load and molecular sieve concentration did not have a significant (p >0.05) influence on MCT yield. Therefore, the significant variables such as reaction temperature, reaction time and molar substrate ratio were further optimized through central composite rotatable design (CCRD). Comparisons between predicted and experimental values from the CCRD optimization procedures revealed good correlation, implying that the quadric response model satisfactorily expressed the percentage yield of MCT in the lipase‐catalyzed esterification. The optimum MCT yield is 73.3% by using 2 wt‐% enzyme dosage, a molecular sieves concentration of 1 wt‐%, a reaction temperature of 90 °C, a reaction time of 10 h and a molar substrate ratio of 4 : 1 (medium‐chain fatty acid/glycerol). Experiments to confirm the predicted results using the optimal parameters were conducted and an MCT yield of 70.21 ± 0.18% (n = 3) was obtained.     

Fluorination of carbon fibres in atmospheric plasma

Carbon fibres were successfully fluorinated in atmospheric-pressure plasma. By treating carbon fibres in a chlorodifluoromethane containing nitrogen atmospheric-pressure plasma, we were able to introduce fluorine groups to the surface of the carbon fibres. XPS confirms the presence of fluorine moieties on the carbon fibre surfaces. Measured contact angles confirm a significantly increased hydrophobicity of the treated carbon fibres. Zeta-potential measurements showed that acidic character of carbon fibres was increased. Although exposure of the carbon fibres to the atmospheric plasma jet causes surface sputtering; XRD analysis, Raman spectroscopy and conductivity measurements performed on the treated fibres show that atmospheric plasma treatment only modifies the surface of the carbon fibres without affecting the bulk properties.     

Linear Size Optimal $q$-ary Constant-Weight Codes and Constant-Composition Codes

An optimal constant-composition or constant-weight code of weight w has linear size if and only if its distance d is at least 2w-1. When d ? 2w, the determination of the exact size of such a constant-composition or constant-weight code is trivial, but the case of d=2w-1 has been solved previously only for binary and ternary constant-composition and constant-weight codes, and for some sporadic instances. This paper provides a construction for quasicyclic optimal constant-composition and constant-weight codes of weight w and distance 2w-1 based on a new generalization of difference triangle sets. As a result, the sizes of optimal constant-composition codes and optimal constant-weight codes of weight w and distance 2w-1 are determined for all such codes of sufficiently large lengths. This solves an open problem of Etzion. The sizes of optimal constant-composition codes of weight w and distance 2w-1 are also determined for all w ? 6, except in two cases.     

Composite beam composed of steel and precast concrete (Modularized Hybrid System,MHS). Part I: experimental investigation

An experimental investigation of composite beams composed of wide flange steel and precast concrete is presented. The bottom flange of the steel section is encased in precast concrete. Utilizing the merits of both steel and concrete material, the size of the steel beams can be reduced without sacrificing performance. The bottom flange of the steel beam is reinforced with concrete at a manufacturing plant, eliminating the use of temporary pour forms. The composite beams were tested to investigate how the size of the wide flange steel and how the top and bottom reinforcements influence the behaviour of the beams. Flexural load carrying capacity, load displacement relationships and failure modes were examined. The test specimens were T‐shaped composite beams with slabs, each measuring 10‐m long. The flexural moment strength of all of the composite beams—at both the yield limit state and the maximum load limit state—was measured and compared with the analytical flexural capacity. The stiffness degradation, ductility and dissipating energy capabilities of the composite beams were investigated based on the hysteresis curves. The composite beams tested in this study successfully reduced both the floor height of the building and the size of the steel beams needed to meet code requirements. Copyright © 2008 John Wiley & Sons, Ltd.     

Optimizing natural rubber blends for examination gloves: Vacuum radiation for mechanical strength and solvent barrier

Natural rubber (NR) is emblematic of sustainability compared to synthetic rubber. However, the tradition of adding sulfur as a vulcanization ingredient results in the release of toxic substances and the potential for health issues. In this study, a feasible strategy was proposed to replace sulfur and discover a safe bulk modification process for NR films. The results have shown that the NR particle size was disintegrated to below 10 nm by gamma irradiation. High tension strength up to 24.45 MPa was observed in the vulcanized NR blend film, which could be elongated up to 800% strain after exposure to an optimum dose of 14 kGy. In comparison to commercial NR latex and nitrile gloves, the vulcanized NR/ SIS films exhibited better chemical resistance ability against hexane, methanol, toluene, and acetone, as revealed by the permeation test. The appearance of amorphous regions and highly oriented NR crystallites was observed through transmission electron microscopy. Findings from this study propose the vacuum radiation strategy that can replace conventional vulcanization methods, resulting in NR films with high mechanical and barrier performance. Furthermore, the emission of toxic substances is reduced by this green process, making it practically useful for potential chemical-resistant examination glove applications.     

Spectral analysis of the Crab Pulsar and Nebula with the Fermi Large Area Telescope

The Crab Pulsar is a relatively young neutron star. The Pulsar is the central star in the Crab Nebula, a remnant of the supernova SN 1054, which was observed on Earth in the year 1054. The Crab Pulsar has been extensively observed in the gamma-ray energy band by the Large Area Telescope (LAT), the main instrument onboard the Fermi gamma-ray space telescope, during its first months of data taking. The LAT data have been used to reconstruct the fluxes and the energy spectra of the pulsed gamma-ray component and of the gamma-rays from the Nebula. The results on the pulsed component are in good agreement with the previous measurement from EGRET, while the results on the Nebula are consistent with the observations from Earth based telescopes.