提高干凝胶强度的途径

干凝胶作为一种新型的轻质多孔材料在工业生产和人们的生活中具有广泛的应用,但是其较低的强度和易碎裂的特点却限制了其实际应用.结合干凝胶的制备过程,总结了几种有效的降低结构破坏的途径,并对其机理做了简要分析,最后对干凝胶的应用前景做了展望.     

A new method for producing high melt strength polypropylene with reactive extrusion

A high‐melt‐strength polypropylene (HMSPP) was prepared using a twin‐screw reactive extruder from a commercial isotactic polypropylene through two stages, first, maleic anhydride is grafted to polypropylene to obtain a maleic anhydride‐grafted polypropylene (PP‐g‐MA), and then the grafted polymer is reacted with epoxy to extend the branched chain. Fourier transformed infrared spectroscopy indicated that maleic anhydride was grafted on polypropylene and reacted with epoxy. Melt flow rate and sag resistance test showed that the melt strength of the HMSPP improved considerably. Differential scanning calorimetry test showed that the long chain branches (LCBs) act as a nucleating agent in the crystallization of the HMSPP, which leads to a high crystallization temperature and crystallinity. Furthermore, the LCB efficiency of the HMSPP can also be calculated by analyzing its rheological property. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

Characteristics of Milk Powders Produced by Spray Freeze Drying

Skim and whole milk powders were manufactured at lab scale by spray freeze drying (SFD), using liquid nitrogen as the cryogen. The polydispersity of droplet/particle sizes was limited using an encapsulator nozzle to atomize the feed. Particle morphology was examined using a scanning electron microscope. Samples were compared with equivalent spray-dried powders in tests of wettability and dissolution in water. The spray freeze-dried powders were found to be highly porous, with a uniform structure of pores throughout the entire particles. When tested in water, SFD skim milk powders wetted roughly three times as fast as industrially spray-dried agglomerated skim milk powders and were observed to dissolve rapidly by breaking down into smaller particles.     

Two-dimensional symmetric multimode interferences in silicon square waveguides

Symmetric interference in two-dimensional multimode silicon waveguides is experimentally investigated. For a 100/spl times/100 /spl mu/m/sup 2/ cross section, 2700-/spl mu/m-long waveguide fabricated on silicon-on-insulator substrate, an 8/spl times/8 matrix of replicated images with high contrast ratio is demonstrated for 1530-1570 nm wavelength range. Symmetric interference results in reduced device length, and the actual device length is consistent with the theoretical expectation. The device also exhibits stable imaging in terms of good loss uniformity, and low wavelength and polarization dependencies among the replicated images.     

Catalytic oxidation of naphthalene using a Pt/Al2O3 catalyst

Polycylic aromatic hydrocarbons (PAHs) are listed as carcinogenic and mutagenic priority pollutants, belonging to the environmental endocrine disrupters. Most PAHs in the environment stem from the atmospheric deposition and diesel emission. Consequently, the elimination of PAHs in the off-gases is one of the priority and emerging challenges. Catalytic oxidation has been widely used in the destruction of organic compounds due to its high efficiency (or conversion of reactants), its economic benefits and good applicability.

This study investigates the application of the catalytic oxidation using Pt/γ-Al₂O₃ catalysts to decompose PAHs and taking naphthalene (the simplest and least toxic PAH) as a target compound. It studies the relationships between conversion, operating parameters and relevant factors such as treatment temperatures, catalyst sizes and space velocities. Also, a related reaction kinetic expression is proposed to provide a simplified expression of the relevant kinetic parameters.

The results indicate that the Pt/γ-Al₂O₃ catalyst used accelerates the reaction rate of the decomposition of naphthalene and decreases the reaction temperature. A high conversion (over 95%) can be achieved at a moderate reaction temperature of 480 K and space velocity below 35,000 h⁻¹. Non-catalytic (thermal) oxidation achieves the same conversion at a temperature beyond 1000 K. The results also indicate that Rideal–Eley mechanism and Arrhenius equation can be reasonably applied to describe the data by using the pseudo-first-order reaction kinetic equation with activation energy of 149.97 kJ/mol and frequency factor equal to 3.26 × 10¹⁷ s⁻¹.     

镁热还原K2ZrF6制备镁锆中间合金

在KCl、NaCl熔剂的保护下,液态Mg能够还原K2ZrF6.通过控制炉料配比、还原温度、还原时间,并用机械正反向交替搅拌,成功地解决了传统生产工艺中渣相与Mg-Zr中间合金难以分离、合金杂质含量偏高、合金成分偏析的难题,获得了高质量的Mg-Zr中间合金.     

Fabrication of Dicing-Free Vertical-Structured High-Power GaN-Based Light-Emitting Diodes With Selective Nickel Electroplating and Patterned Laser Liftoff Techniques

Through the use of selective nickel (Ni) electroplating, patterned laser liftoff technique, and surface roughing of the top n-GaN epilayer, a novel process for the fabrication of vertical-structured metal-substrate GaN-based light-emitting diodes (VM-LEDs) to avoid difficulties in Ni substrate dicing and improve device yield was proposed and demonstrated. In conjunction with a sidewall passivation with SiO₂ and keeping the size of epilayer smaller than that of Ni island, a considerable improvement in yield and device performance were shown. As compared to conventional lateral-structured GaN-based LEDs, VM-LEDs show an increase in light output power about 174% at 350 mA with a significant decrease in forward voltage from 3.5 to 3.17 V     

基于Lab VIEW的小型汽油机磁电机点火提前角的测量

本文介绍了磁电机点火系统的点火提前角测量原理。对点火系统的点火信号和触发信号进行采集、调理，再用单片机进行处理，最后用LabVIEW进行点火提前角数据存储和显示。     

3D velocity from 3D Doppler radial velocity

We present local least squares and regularization frameworks for computing 3D velocity (3D optical flow) from 3D radial velocity measured by a Doppler radar. We demonstrate the performance of our algorithms quantitatively on synthetic radial velocity data and qualitatively on real radial velocity data, obtained from the Doppler radar at Kurnell Radar station, Botany Bay, New South Wales, Australia. Radial velocity can be used to predict the future positions of storms in sequences of Doppler radar datasets.© 2005 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 15, 189–198, 2005     

A novel broadcast scheduling strategy using factor graphs and the sum-product algorithm

This paper presents a novel self-organizing distributed algorithm for finding a broadcasting schedule in a packet radio network via only local collaborative interactions among neighboring network stations. Inspired by the huge success of the low density parity check (LDPC) codes in the field of error control coding, we transform the broadcast scheduling problem (BSP) into an LDPC-like problem through a factor graph. In the proposed algorithm, the constraint rules of the BSP are divided into many simple local rules, each of which is enforced by a local processing unit in the factor graph. The soft-information, describing the probability that each station will transmit a data packet, is then efficiently exchanged among the local processing units by using the sum-product algorithm to iteratively optimize the broadcasting schedule. Simulation results indicate that the proposed algorithm performs better than the other existing central-processing algorithms in terms of the channel utilization and the average packet delay. This is true especially when the network scenario is very complex. Furthermore, the proposed algorithm is both low in complexity and completely distributed, which makes it suitable for implementation in practical network applications.