燃烧合成三元碳化合物Ti2AlC1-x

采用Ti，Al和C元素粉末为反应物原料，通过燃烧合成法首次成功地制备出了单相三元碳化合物Ti2AlC1-x。实验结果表明：若以“理想”晶体结构化学式Ti2AlC化学计量比为起始反应原料配比，燃烧产物主晶相为Ti2AlC2；以缺碳的非化学计量比(Ti2AlC1-x)为反应原料配比，即Ti：Al：C=3：1．5：1=2：1：0．7(摩尔比)，得到单相的燃烧产物Ti2AlC1-x。从热力学原理的角度探讨了不同原料摩尔配比对燃烧产物相组成的影响机理。     

铝质材料的摩擦学表面改性

铝质材料阳极氧化膜系均匀、规则的微观多孔质结构，利用物理、化学或电化学的方法在其中沉积或原位合成润滑性物质，在保持阳极氧化膜质硬、耐磨特性的基础上，使其具有一定的白润滑性，是近十多年来铝质材料表面改性研究的热点领域之一，本文对该研究的基本原理和国内外发展概况进行了概述，并重点介绍了我们在这一方面研究中的一些最新进展和结果，分别介绍了三种新型体系的自润滑改性阳极氧化铝材料．     

Electrochemical Study on Formation of Dy-Ni Alloy in Molten Chlorides

ＥｌｅｃｔｒｏｃｈｅｍｉｃａｌＳｔｕｄｙｏｎＦｏｒｍａｔｉｏｎｏｆＤｙ－ＮｉＡｌｌｏｙｉｎＭｏｌｔｅｎＣｈｌｏｒｉｄｅｓＴｏｎｇＹｅｘｉａｎｇ；ＬｉｕＧｕａｎｋｕｎ；ＹａｎｇＱｉｑｉｎ；ＨｏｎｇＨｕｉｃｈａｎ，（童叶翔）（刘冠昆）（杨绮琴）（洪惠婵）...     

Predicting phase equilibrium,phase transformation,and microstructure evolution in titanium alloys

Phase transformation and microstructural evolution in commercial titanium alloys are extremely complex. Traditional models that characterize microstructural features by average values without capturing the anisotropy and spatially varying aspects may not be sufficient to quantitatively define the microstructure and hence to allow for establishing a robust microstructure-property relationship. This article discusses recent efforts in integrating thermodynamic modeling and phase-field simulation to develop computational tools for quantitative prediction of phase equilibrium and spatiotemporal evolution of microstructures during thermal processing that account explicitly for precipitate morphology, spatial arrangement, and anisotropy. The rendering of the predictive capabilities of the phase-field models as fast-acting design tools through the development of constitutive equations is also demonstrated. For more information, contact Y.-Z. Wang, Department of Materials Science & Engineering, Ohio State University, 2041 College Road, Columbus, OH 43221, USA; (614) 292-0682; fax (614) 292-1537; e-mail wang.363@osu.edu.     

电动车制动能量再生反馈控制研究

研究了电动汽车制动过程中的能量回馈，设计了混合励磁无刷电动机在汽车制动过程的能量再生反馈控制系统。以脉宽调制调压调速系统为例，研究各种制动态下的能量回馈过程。并将其安装在EV6600电动汽车上进行试验，结果表明：该控制系统可达到10%左右的能量回收效率。     

汽车喷烤漆自动控制系统

本文通过研究目前汽车烤漆房的实际运行情况，提出了一种汽车烤漆房喷漆自动控制系统，阐述了系统喷漆装置的构成、配合与运行原理，并构成了实际试验系统。     

NH4F及燃烧温度对燃烧合成长柱状Yb α-Sialon粉体的影响

采用SHS法合成了Yb α-Sialon粉体，采用XRD和SEM分析和研究了添加剂NH4F及燃烧温度对燃烧合成长柱状Yb α-Sialon相组成和形貌的影响。实验发现，在不同条件下，添加剂NH4F对燃烧合成长柱状α-Sialon的晶体形貌可以起到抑制和促进两个相反的作用。温度越高，晶体生长速率越大，反应降温越慢，晶体生长时间越长，长柱状晶体生长越完整。燃烧合成得到的长柱状α-Sialon粉体，在室温下，以酒精为介质经过30min以上的超声分散，可以达到较好的分散效果。     

基于危险理论的人工免疫原理与应用*

侧重以危险理论的基本机制为线索,对危险理论的研究现状加以系统论述.首先以危险理论的免疫模型入手,归纳提炼出仿真机理并建立起隐喻算法;介绍其中具有代表性领域中的应用情况;最后对基于危险理论的人工免疫研究的下一步工作进行展望.     

Red-Blood-Cell-Membrane-Coated Metal-Drug Nanoparticles for Enhanced Chemotherapy

To overcome high toxicity, low bioavailability and poor water solubility of chemotherapeutics, a variety of drug carriers have been designed. However, most carriers are severely limited by low drug loading capacity and adverse side effects. Here, a new type of metal-drug nanoparticles (MDNs) was designed and synthesized. The MDNs self-assembled with Fe(III) ions and drug molecules through coordination, resulting in nanoparticles with high drug loading. To assist systemic delivery and prolong circulation time, the obtained MDNs were camouflaged with red blood cell (RBCs) membranes (RBCs@Fe-DOX MDNs) to improve their stability and dispersity. The RBCs@Fe-DOX MDNs presented pH-responsive release functionalities, resulting in drug release accelerated in acidic tumor microenvironments. The outstanding in vitro and in vivo antitumor therapeutic outcome was realized by RBCs@Fe-DOX MDNs. This study provides an innovative design guideline for chemotherapy and demonstrates the great capacity of nanomaterials in anticancer treatments.     

消失模精密铸造工艺研究

借助熔模铸造制壳工艺制成消失模铸造用的超薄空腔型壳，以减少消失模铸造在浇注过程中因聚苯乙烯气化而产生的铸件增碳、增氢等缺陷。聚苯乙烯模失模工艺为随炉升温至600℃，保温60min,型壳焙烧工艺为800℃焙烧1h。