A steel surface defect inspection approach towards smart industrial monitoring

Journal of Intelligent Manufacturing - With the advance in Industry 4.0, smart industrial monitoring has been proposed to timely discover faults and defects in industrial processes. Steel is widely...     

一种新的无线电高度表原位检测的高度模拟方法

针对目前对高度表进行原位检测的需求,设计了一种新的高度模拟方法;该方法的实现以ARM为核心,通过高度模拟电路产生各种需要的高度电压信号,从而达到高度模拟的目的,并且无需对机载高度表进行拆装,操作简单、快捷、可靠性较高;实验结果表明,这种方法的高度模拟精度较高,具有一定的实用价值和经济效益.     

EFFECT OF RARE EARTH ADDITIONS ON THE IMPACT FRACTURE OF Cr18Nil8Si2 STEEL

<正> Cr 18 Ni 18 Si 2钢经热处理后的低温冲击断口,其中加稀土的为穿晶断口,而未加稀土的为混合型断口。 试验用钢用高频感应炉冶炼,锭重20kg,锻成15×15mm方棒,再加工成冲击试样。其化学成分如下。稀土的加入是将一号混合稀土合金缚在钢棒上插入熔池。     

One-step molten salt carbonization of tobacco stem for capacitive carbon

Journal of Porous Materials - High-performance carbon materials for supercapacitors were prepared by a one-step molten salt carbonization of tobacco stem in molten carbonate. Physicochemical...     

含多端口能量路由器的多能互补系统故障保护功能测试研究

针对某区域用电负荷存在严重的季节性过载现象,以及可再生能源存在功率波动大、稳定性较差的问题,研制了多能(含水电、光伏、储能)、多端口的能量路由器装置及其能量管理系统.综合考虑当地多场景运行,解决了季节性过载问题,实现了能量的合理配置与利用.首先,对比分析选定能量路由器各端口变换器的拓扑结构;然后,对多场景下的工作模式进行介绍;最后,对含能量路由器的多能互补系统进行故障保护功能测试.测试结果表明,该系统具有较好的故障保护功能,有效实现了不同场景下的工作模式切换,直流母线电压稳定以及上层功率指令跟踪等功能,解决了当地用电负荷季节性过载和可再生能源功率波动较大的问题.     

关节式电分相电磁暂态过程研究

关节式电分相是电气化铁路牵引供电系统较为薄弱的环节,电力机车在通过关节式电分相时经常会产生过电压现象,过电压可能会造成机车放电间隙击穿、牵引所馈线保护跳闸,严重影响铁路的安全运营.从实测结果来看,机车在过渡区和中性区行驶时过电压会持续存在一段时间,与以往对关节式电分相产生过电压的研究作对比,分析造成电磁暂态过程以及过电压延续的原因可能是机车的移动.在MATLAB/Simulink软件上建立了机车过关节式电分相的仿真模型,用多个离散过程来近似模拟机车过电分相的连续过程,最后与实测波形对比,验证等效模型是有效的.     

Properties of poly(n‐butyl methacrylate) prepared by reverse atom transfer radical polymerization in an aqueous dispersed system

Reverse atom transfer radical polymerization (ATRP) of n‐butyl methacrylate (BMA) in waterborne media using Cu(II) complexes with azo initiators (i.e., reverse ATRP) was conducted. The influence of several factors, such as surfactant, catalyst, and reaction time, on the stability of the emulsion, the particle size, the morphology of the emulsion particles, and the control of the polymerization was investigated. The results showed great differences between ATRP and conventional emulsion polymerization, especially the nucleation mechanism and the kinetics. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1542–1547, 2003     

Transformation of β-Ni(OH)2 to NiO nano-sheets via surface nanocrystalline zirconia coating: Shape and size retention

Shape and size of the synthesized NiO nano-sheets were retained during transformation of sheet-like β-Ni(OH)₂ to NiO at elevated temperatures via nano-sized zirconia coating on the surface of β-Ni(OH)₂. The average grain size was 6.42 nm after 600 °C treatment and slightly increased to 10 nm after 1000 °C treatment, showing effective sintering retardation between NiO nano-sheets. The excellent thermal stability revealed potential application at elevated temperatures, especially for high temperature catalysts and solid-state electrochemical devices.     

铟（Ⅲ）－钼酸铵－罗丹明B显色反应体系的研究及其应用

铟（Ⅲ）与钼酸铵和罗丹明Ｂ在ＰＶＡ存在下的酸性水溶液中形成离子缔合物而产生显色反应，该体系的灵敏度高，摩尔吸光系数ε＝２．４４×１０５Ｌ·ｍｏｌ－１ｃｍ－１，离子缔合物稳定性好，至少稳定４８ｈ。研究了显色体系的光度特性和３０多种共存离子的影响，该法应用于纯锡中痕量铟的测定，结果满意。     

PVC／PU合金的制备与研究

叙述了选择混炼型聚氨酯(PU)与分子量适中的Ⅱ型聚氯乙烯(PVC)树脂制备PVC/PU合金的过程,讨论了PVC/PU共混比、填充剂、硫化体系、共混工艺等因素对PVC/PU合金性能的影响。结果表明:选择PVC/PU=60/40(质量比),硫化剂TD15份,白炭黑30份,混炼温度140—160℃,可制得性能优良的PVC/PU合金。动态力学性能实验显示了PVC/PU合金有较好的相容性。