直接转矩控制在矿井提升机中的应用

针对当前矿井提升机低速运行稳定性差、控制准确性低的主要问题，提出了应用交流电机直接转矩控制技术，采用优化U-N磁链模型和优化PI控制算法，并提出了相应的办法进行优化设计，经实际运行表明：提高了提升机的低速运行平稳性和控制精度。     

Influence of Shaping Condition on Etherification Performance of Hβ Zeolite

Etherification reaction of FCC light gasoline over Hβ zeolite was investigated to decrease the light olefins in motor gasoline while enhancing octane. Etherification activity of several molecular sieve catalysts for FCC light gasoline was studied in a fixed-bed reactor. The influence of pore-enlarging agent (PEG) with different molecular weight, binder (γ-Al₂O₃), and peptizing agent (HNO₃) in the shaping process on etherification activity of Hβ zeolite was studied. The impregnating ways of precursor of oxides and the order of extruding and impregnating were also investigated. The results show that the activity of extruded Hβ zeolite before impregnating precursor of oxides is higher than the reverse order. The best shaping condition obtained was PEG-4000 10%, γ-Al₂O₃ 20%, and HNO₃ 10%. At the optimal reaction condition, the conversion of tert-olefins reached the peak. 62.93%, the yield of TAME, is also high and the technology can be applied to industry as well.     

The use of transparent conducting indium-zinc oxide film as a current spreading layer for vertical-structured high-power GaN-based light-emitting diodes

In this study, the performance of vertical-structured high-power GaN-based light-emitting diodes (VM-LEDs) with a transparent and low-resistant indium-zinc oxide (IZO) film as a current spreading layer (CSL) was investigated. Nickel electroplating and patterned laser liftoff techniques were employed for the transfer of sapphire substrate to nickel substrate. The novel IZO CSL atop n-side-up VM-LEDs offering benefits of superior current spreading ability, larger extraction efficiency, and lower forward voltage drop was demonstrated. As compared to the regular LED without IZO CSL, the use of an IZO CSL with an optimum thickness of around 300 nm leads to an increase in light output power by 97.1 (67.8)% and a decrease in forward voltage drop by 4.9 (15.5)% under an injection current of 350 (800) mA.     

WDB620高强钢应用于大型蜗壳的焊接制造工艺研究

2005年初,水电十四局承担了漫湾二期水电站和小湾水电站蜗壳的制造任务。蜗壳钢材选用国产600 MPa级别高强钢,为了全面综合地考核该级别钢种的材料强度和安全裕度,检验模拟大型蜗壳焊接制造工艺的可靠性。对国产的WDB620高强钢进行了可焊性和制造工艺性试验研究,并在国内首次设计、制造模拟压力容器并对其进行水压试验和爆破试验。研究成果通过中国水电集团公司鉴定,结论为该课题研究成果达到国内选进水平。     

Performance of the polymer- and oxide-supported triphase catalysts and effect of ultrasound on their stabilities

In this study, several trialkylamines were immobilized on chloromethylated polystyrene (CMPS), silica gel, and alumina to prepare triphase catalysts for catalyzing the etherification reaction of allyl bromide (the organic reactant) and sodium phenolate (the aqueous reactant). The reactor was agitated mechanically or with the aid of ultrasonic vibration. Performances of the prepared catalysts were compared, and the effect of imposing ultrasound was investigated based on the activity, selectivity, and stability of the catalyst. Experimental results show that tri-n-propylamine is the best active species when CMPS is used as the support, while tri-n-butylamine is the best when SiO₂ and Al₂O₃ are employed as the supports. The CMPS-supported catalyst is far better than the SiO₂- and Al₂O₃-supported catalysts in activity and selectivity but not in stability. Imposing the ultrasound can effectively increase the reaction rate. Mechanical agitation at a low speed with the imposition of ultrasonic vibration not only results in a conversion slightly higher than the case with a high mechanical agitation speed without ultrasonic vibration, but also gives a constant stability for the CMPS-supported catalyst.     

Preparation and Characterization of Carboxymethyl Chitosan and β-Cyclodextrin Microspheres by Spray Drying

Three kinds of carboxymethyl chitosan/β-cyclodextrin microspheres loaded with theophylline were prepared by spray drying intended for pulmonary delivery. Mucociliotoxicity, permeation rate, and drug release characteristics of the product were investigated. The microspheres obtained by spray drying were found to be spherical with smooth or wrinkled surfaces. The mean particle size was between 3.39 and 6.06 µm. The microspheres demonstrated high product yield (43.7-50.2%), high drug loading (13.7-38.1%), and high encapsulation efficiency (86.9-92.8%). FT-IR indicated that there were interactions of theophylline with carboxymethyl chitosan matrix. Further studies on mucociliotoxicity and permeation confirmed that microspheres had better adaptability and high permeation rate. In vitro drug release from the microspheres was not related to the drug/polymer ratios.     

Optimal biocompatible solvent design for a two-stage extractive fermentation process with cell recycling

In this study, crisp and fuzzy multiple-goal optimization approaches are respectively introduced to design an optimal biocompatible solvent to a two-stage extractive fermentation with cell recycling for ethanol production. When designing a biocompatible solvent for the extractive fermentation process, many issues, such as extractive efficiency, conversion, amount of solvent utilized and so on, have to be considered. An interactive multiple-goal design procedure is introduced to determine a trade-off result in order to satisfy such contradicted goals. Both approaches could be iterated to solve the interactive multiple-goal design problem in order to yield a trade-off result. However, the crisp optimization design is a tedious task that requires the designer to provide various pairs of the upper bounds for the design problem to obtain the corresponding solution. The fuzzy optimization approach is able to be trade-off several goals simultaneously and to yield the overall satisfactory grade for the product/process design problem.     

The deposition morphology of Brownian/non-Brownian particles within a constricted tube

The deposition morphology of Brownian/non-Brownian particles within a constricted tube is investigated by applying the Brownian dynamics simulation method in the present paper. Two different geometric structures, the parabolic constricted tube (PCT) and the sinusoidal constricted tube (SCT), are adopted. The effect of various types of the total interaction energy curves of the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory, and of the shadow area cast by those deposited particles, on the particles’ collection efficiencies are also examined. For the PCT structure, under the same interaction energy curve, it is found that the non-Brownian particles always own a higher collection efficiency than that of the Brownian particles. Since the deposition location moves closer to the constriction part of the tube, the collection efficiencies of the Brownian/non-Brownian particles increase with the decrease of flow velocity. The SCT behaves differently, it is found that the collection efficiencies of non-Brownian particles are only slightly higher than those of Brownian particles when SCT is adopted. The steep slope of the tube wall near the constriction part of SCT dominates the whole deposition process of Brownian/non-Brownian particles. In comparison with the available experimental data, it is found that the present method can give a good simulation result.