银狐皮毛被及皮板组织构造的研究

用光学显微镜和扫描电镜观察了国产人工饲养银狐的毛被和皮板组织构造 ,测定了毛的长度、细度、密度、毛的鳞片高度和皮板厚度。提供了毛和皮板组织学图片 15幅。     

气泡在粘弹性液体中溶解的研究进展

在发泡塑料的制造过程中，均相气体－聚合物体系的形成直接影响了制品的物理机械性能，因此了解气泡在粘弹性液体中的溶解机理成为必然。本文讲述了气泡在流体中塌陷行为的研究进展。对Rayleigh对低粘度牛顿流体，Foqer和Goddand在无线量线性Maxwell模型的粘弹性体，Tanasawa和Tang用oldroyd三常数粘弹模型等科学家的研究行为做了概述，总结出影响此过程的复杂的影响因素，并指出进一步的研究方向。     

定向棱镜腔平顶高斯激光束特性的研究

在XeCl准分子激光器中,采用定向棱镜作为端反射镜与平面输出镜构成激光器谐振腔,获得了近场能量分布均匀、远场能量分布高度集中的相干平顶高斯激光束输出,并具有腔镜高抗失调能力,改善了激光束质量。     

内循环好氧三相流化床处理造纸中段废水

本实验采用内循环好氧三相流化床处造纸中段废水，经过一段时间的驯化，获得了稳定的出水。CDO去除经保持在65％以上，系统对进水污染负荷的变化具有较大的承受能力。出水Cl^-的浓度有所增加，说明驯化后的微生物可能对有抽氯化物具有一定的降解作用。水气比在1／120至1／140之间可获得最好的COD去除效果。后进行絮凝处理后，出水COD降为60－80mg/L,BODo 50-60/L，色度为100－150CU，挥发性酚的质量浓度小于0．0265mg／L。     

Interfacial segregation of Ti in the brazing of diamond grits onto a steel substrate using a Cu-Sn-Ti brazing alloy

Diamond grits were brazed onto a steel substrate using a prealloyed Cu-10Sn-15Ti (wt pct) brazing alloy at 925 °C and 1050 °C. Due to the relatively high concentration of Ti in the brazing alloy, the braze matrix exhibited a composite structure, composed of β-(Cu,Sn), a Cu-based solid solution, and various intermetallic compounds with different morphologies. The reaction of Ti with diamond yielded a continuous TiC layer on the surfaces of the diamond grits. On top of the TiC growth front, an intermetallic compound, composed of Sn and Ti, nucleated and grew into a randomly interwoven fine lacey structure. An interfacial structure developed as the interwoven fine lacey phase was semicoherently bonded to the TiC layer, with the Cu-based braze matrix filling its interstices. The thickness of such a composite layer was increased linearly with the square root of isothermal holding time at 925 °C, complying with the law of a diffusion-controlled process. However, at 1050 °C, the segregation behavior of Ti and Sn to the interfaces between the TiC layer and the braze matrix diminished, due to the increased solubility of Ti in the Cu-based liquid phase. The enhanced dissolution of Ti in the Cu-based liquid phase at 1050 °C also caused the precipitation of rod-like CuTi with an average diameter of about 0.2 μm during cooling. SnTi₃ was the predominant intermetallic compound and existed in three different forms in the braze matrix. It existed as interconnected grains of large size which either floated to the surface of the braze matrix or grew into faceted grains. It also exhibited a nail-like structure with a mean diameter of about 1 μm for the rod section and a lamellar structure arising from a eutectic reaction during cooling.     

行波热声驱动器的性能分析

在简单介绍行波热声驱动器的研究历史、工作机理及其与驻波型热声驱动器的区别之后，着重对环路部分的性能进行了预测分析，并给出一些有益的结论。     

新型高k栅介质材料研究进展

随着半导体技术的不断发展，MOSFET（metal-oxide-semiconductor field effect transistor）的特征尺寸不断缩小，栅介质等效氧化物厚度已小至nm数量级。这时电子的直接隧穿效应将非常显著，将严重影响器件的稳定性和可靠性。因此需要寻找新型高k介质材料，能够在保持和增大栅极电容的同时，使介质层仍保持足够的物理厚度来限制隧穿效应的影响。本文综述了研究高k栅介质材料的意义；MOS栅介质的要求；主要新型高k栅介质材料的最新研究动态；展望了高k介质材料今后发展的主要趋势和需要解决的问题。     

有限单元法在边坡稳定分析中的应用实例：—天龙湖电站较场滑坡堆积体稳定性评价

经采用非线性有限元方法对天龙湖电站较场滑坡堆积体在自重应力，九度地震状态下和削坡整治后的应力，应变、单元安全系数和塑性区分布情况分析认为，天然状态下较场滑坡堆积体是稳定的，九度地震条件下较场滑坡堆积体处于临界破坏状态或不稳定，经削坡整治后较场滑坡堆积本能处于稳定状态。     

心理因素对分析数据的影响及预防措施

研究了分析人员的心理状态、情绪变化、内在动机等对分析数据的影响,提出了具体的对策和预防措施     

塑料挤出型材车间公用工程设计

鉴于当今人们对塑料门窗需求量的增大，通过对5个塑料挤出型材车间的设计，将其公用工程设计整理成文，总结出塑料挤出型材车间的采暖通风设计，压缩空气系统设计，制冷系统设计的较详尽的方案，以供有关设计技术人员参考。