MC(Mid-Century)催化氧化过程的研究进展

介绍了MC催化氧化过程规律；从催化荆体系的改进、新型溶剂体系的开发、反应器构型和配套设施的改进、富氧氧化技术的开发等方面综述了近年来MC技术的发展；探讨了MC液相催化氧化技术应用范围的拓展以及MC液相催化氧化过程的发展方向。     

Crystallization behavior,mechanical properties,and environmental biodegradability of poly(β‐hydroxybutyrate)/cellulose acetate butyrate blends

The miscibility, crystallization behavior, tensile properties, and environmental biodegradability of poly(β‐hydroxybutyrate) (PHB)/cellulose acetate butyrate (CAB) blends were studied with differential scanning calorimetry, scanning electron microscopy, wide‐angle X‐ray diffraction, and polarizing optical microscopy. The results indicated that PHB and CAB were miscible in the melt state. With an increase in the CAB content, the degree of crystallinity and melting temperature of the PHB phase decreased, and this broadened the narrow processability window of PHB. As the elongation at break increased from 2.2 to 7.3%, the toughness and ductility of PHB improved. From the degradation test, it could be concluded that degradation occurred gradually from the surface to the inside and that the degradation rate could be adjusted by the addition of the CAB content. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2116–2122, 2003     

Reaction mechanism and microstructure evolution of reaction sintered <Emphasis Type="Italic">h</Emphasis>-BN

Hexagonal boron nitride ceramic (h-BN) based on the nitridation of B powders was obtained by reaction sintering method. The effects of sintering temperature on the mechanical properties and microstructure of the resultant products were investigated and the reaction mechanism was discussed. Results showed that the reaction between B and N₂ occurred vigorously at temperatures ranging from 1 000 °C to 1 300 °C, which resulted in the generation of t-BN. When the temperature exceeded 1 450 °C, transformation from t-BN to h-BN began to occur. As the sintering temperature increased, the spherical particles of t-BN gradually transformed into fine sheet particles of h-BN. These particles subsequently displayed a compact arrangement to achieve a more uniform microstructure, thereby increasing the strength.     

Simple Preparation of Crystal Co3（BTC）2·12H2O and Its Catalytic Activity in CO Oxidation Reaction

Crystalline metal-organic framework cobalt(Ⅱ) benzenetricarboxylate Co3(BTC)2?12H2O(MOF-Co) has been prepared using solvothermal method. The reaction of cobalt(Ⅱ) nitrate and 1,3,5-benzenetricarboxylic(BTC) acid in a mixed solution of N,N-dimethylformamide(DMF)/C2H5OH/H2O(1:1:1, ν/ν) at low temperature for short reaction times produced this crystalline compound. Compared with traditional hydrothermal method, a mixed solution method for the synthesis of crystalline metal complex was found to be highly efficient. After water molecules were removed from this metal complex, its exposed nodes served as active sites. When this MOF-Co was employed in the oxidation of CO, it showed good catalytic properties causing 100% conversion of CO to CO2 at low temperature of 160 ℃.     

微创业:大学生创业实践教育的思考

大学生创业实践是高校创业教育的一个难题。当前国内高校创业教育普遍存在实践教育环节薄弱、效果不显著等问题,本研究同步社会经济发展,尝试以微创业视角思考高校创业实践教育,通过梳理微创业的概念及应用,从契合大学生需求角度分析微创业具有的时代性、低门槛、大众化、创新性等特点。并根据高校实际情况,从完善微创业环境、开设微创业课程、建立微创业实践基地、提供微创业网络平台服务等方面提出推动高校大学生微创业的路径建议。     

超细Al（OH）3的粒度控制研究

采用铝酸钠种子分解法制备超细Al（OH）3.用X射线衍射仪（XRD）表征了样品的晶相组成,用扫描电子显微镜（SEM）观察了样品的形貌,用激光粒度分析仪测定样品的粒度分布.研究了NaOH浓度、NaOH/Al（OH）3摩尔比,分解温度,分解时间、晶种率和搅拌速率等因素对Al（OH）3的粒度的影响.结果表明：NaOH浓度越高,分解温度越低,NaOH/Al（OH）3摩尔比越小,得到的Al（OH）3颗粒的粒度越小.试验条件为：NaOH浓度180 g/L,NaOH/Al（OH）3摩尔比1.15,分解温度40℃,分解时间26 h,晶种率8％,搅拌速率200 rpm时,氢氧化铝颗粒的平均粒度为2.89 μm.     

Electrochemical investigation of La0.4Sr0.6TiO3 synthesized in air for SOFC application

Journal of Applied Electrochemistry - La-doped titanate materials have been widely investigated as alternative Ni-free anodes for solid oxide fuel cells (SOFCs). In this study, La0.4Sr0.6TiO3 (LST)...     

硝硫混酸与Ag、Cu反应的动力学

用失重法探讨了硝硫混酸此例、浸出温度和时间等因素对银的溶解和铜的钝化的影响。结果表明:在一定的[HNO_3]范周内,较高温度时,银的溶解符合一级反应规律;求得银的溶解量与时间、HNO_3起始浓度等的关系式和相应的反应活化能;铜在此条件时是钝化的。本实验再一次证实了银的溶解和铜的钝化机理的正确性,也为银、铜的分离提供了实验依据。     

含Cl^-溶液中SO4^2-对316不锈钢临界点蚀温度的影响

采用外加恒电位下腐蚀电流-温度扫描方法研究了在0．5％Cl^-溶液中，SO4^2-浓度对316不锈钢点腐蚀行为的影响．结果表明，随着SO4^2-浓度的增加，钝化电流增加，开路电位降低．当SO4^2-浓度低于0．42％时，316不锈钢的临界点蚀温度比不存在SO4^2-时的临界点蚀温度低；当SO4^2-浓度大于0．42％时，临界点蚀温度比不存在SO4^2-时的临界点蚀温度高．从离子竞争吸附的角度进行分析，对SO4^2-加速与抑制点蚀两种作用规律的形成原因进行了解释．