Synthesis of C_f/TiAl_3 Composite by Infiltration-In Situ Reaction

Infiltration-in situ reaction synthesis of Cf /TiAl3 composite was investigated. The as-cast material was obtained by titanium particles, carbon fibers and pure aluminum. Titanium particles and carbon fibers were mixed and pressed to form a preform firstly, and then molten pure aluminum was pressed into the preform, subsequently, cooled rapidly. In situ reaction samples were obtained by heating the as-cast material from 600 to 1000 °C for 1 h. The microstructural evolution of in situ reaction samples was an...     

Large-scale fabrication of bioinspired fibers for directional water collection

Spider-silk inspired functional fibers with periodic spindle-knots and the ability to collect water in a directional manner are fabricated on a large scale using a fluid coating method. The fabrication process is investigated in detail, considering factors like the fiber-drawing velocity, solution viscosity, and surface tension. These bioinspired fibers are inexpensive and durable, which makes it possible to collect water from fog in a similar manner to a spider's web.     

Effect of ligand passivation on morphology,optical and photoresponse properties of CdS colloidal quantum dots thin film

In the present report, cadmium sulfide (CdS) colloidal quantum dots (CQDs) with average diameter of 6 nm were synthesized by using oleylamine as ligand and solvent. The insulating oleylamine ligands form barriers around the CdS CQDs to decrease carrier mobility. In order to remove the ligands and improve the photoelectrical properties of the closed-packed film, ethanedithiol, mercaptopropionic acid and cetyltrimethylammonium bromide (CTAB) were applied for solid state ligand exchange. CTAB treated film had the fastest 3 dB bandwidth of 144.7 Hz and yielded the highest detectivity of 1.37 × 10⁸ Jones. The excellent properties of ligand passivation have important application in nanocrystals based electronic and optoelectronic devices.     

Therapy for cerebral ischemic injury with erythropoietin-containing nanoparticles

In this study we prepared nanocarrier of erythropoietin (EPO) and the curative effect of the EPO-containing nanoparticles for periventricular leukomalacia (PVL) model was validated. It was demonstrated that EPO-containing nanoparticles can ameliorate drug-induced liquefaction caused by hypoxia. EPO-containing nanomedicine may open new therapeutic strategies in hypoxia cure.     

LaO_x(OH)_y supported platinum catalysts for CO oxidation:Deactivation by formation of lanthanum carbonate

Platinum catalyst for CO oxidation has been studied for decades,due to its high activity and good stability.In this work,we prepared three different lantha num oxide or hydroxide supports(LaO_x(OH)_y),and deposited platinum(Pt) with 0.5 at% via an impregnation approach to synthesize Pt/LaO_x(OH)_y catalysts.However,we find that these catalysts perform a poor stability for the CO oxidation reaction.The fresh and used samples were comprehensively characterized by multiple techniques including power X-ray diffraction(XRD),X-ray absorption fine structure(XAFS),transmission electron microscopy(TEM),temperature-programmed reduction by carbon monoxide(CO-TPR) and thermogravimetric analysis(TGA),to demonstrate that the oxidized platinum atoms or clusters,without any component of Pt-Pt metallic bond,are highly dispersed on the surface of LaO_x(OH)_y.Furthermore,the as-formed lanthanum carbonate(La₂O₂CO₃) during the exposure to ambient circumstances or in the reaction atmosphere of CO+O₂,severely impair the reactivity of Pt/LaO_x(OH)_y.On the basis of the obtained experimental results,we have drawn a conclusion that the oxidized P_tO_x atoms or PtxOy clusters are the active species for CO oxidation,while the formation of lanthanum carbonate is the origin of deactivation on reactivity.     

2%CrMoNiWV高低压复合转子材料的研究

试验研究了2%CrMoNiWV高低压复合转子材料。试验件在950℃奥氏体化,高压区模拟直径1350mm,模拟喷雾冷速为2.5℃/min,回火温度为660～690℃;低压区模拟直径2500mm,模拟喷水冷速为3℃/min,回火温度为630～660℃。结果表明,综合力学性能达到了目标要求。     

数控研配液压机上梁有限元计算

研配液压机的上梁为箱式梁,其受力分析采用材料力学计算,精度非常低,局部应力和应力集中处都不能表现,在主要结构完成后,需要采用有限元进行应力和变形分析.本文采用有限元法计算研配液压机的上梁,结果表明该方法有助于上梁的结构计算.     

Fabrication and performance of atmospheric plasma sprayed solid oxide fuel cells with liquid antimony anodes

A solid oxide fuel cell (SOFC) with a liquid antimony anode (LAA) is a potential energy conversion technology for the use of impurity-containing fuels.Atmospher...     

ptp通讯在锌电解供电优化系统中的研究与应用

以提高锌电解供电系统的自动化程度、实现网络控制为目的,在分析了系统总体结构和控制原理的基础上,重点讨论了ptp通讯在系统中的研究与应用;ptp通讯网络以S7-300PLC为主站,以两台晶闸管数字触发器为从站,实现电流给定和触发角反馈等信号的传输,其通讯协议简单,开发成本低,与Profibus网一道组成的控制网抗干扰能力强,可靠性高,有力地保证了锌电解供电优化系统安全运行,为锌电解提高整流效率、节约电能提供了保障.