Throughput analysis of a CSMA based WLAN with successive interference cancellation under Rayleigh fading and shadowing

In this paper, we consider a carrier sense multiple access based wireless local area network (WLAN) with a successive interference cancellation (SIC) technique. We develop an analytical model to compute the average throughput of a user in a WLAN with the SIC technique in presence of path loss, Rayleigh fading and log-normal shadowing. We then validate the model via simulation. By means of the developed analytical model, we compute the average throughput of a user in WLAN systems without and with the SIC technique and evaluate the throughput gain provided by the SIC technique. We find that the throughput gain provided by the SIC technique is significant. However, the throughput gain varies significantly depending on the parameters of network and wireless channel. We find that the throughput gain provided by the SIC technique increases with increasing the number of users in WLAN, medium access rate of the users and the variance in shadowing and it decreases with increasing the data transmission rate. We also investigate the effect of the decoding capability of the SIC technique on the throughput performance. We find that throughputs obtained with decoding capability of 2 and 3 packets are very close.     

FIR system identification based on a nonparametric Bayesian model using the Indian buffet process

In this paper, we propose a nonparametric Bayesian model combined with the Indian buffet process (IBP) for a finite impulse response (FIR) system. We develop an FIR system identification method that can simultaneously estimate the number of FIR taps and coefficients. In the proposed model, each FIR tap consists of a coefficient and a gain, and the gain is a binary value. An infinite-dimensional binary vector is composed of binary values, and we assume that this binary vector is generated by the IBP. To identify the FIR system, we specify the likelihood function and prior distributions of the parameters and derive their posterior distributions. We can simultaneously estimate the number of FIR taps and coefficients by sampling from posterior distributions using the Gibbs sampler. Our simulations demonstrate that although the number of FIR taps is unknown, the identification performance of the proposed method in a high signal-to-noise ratio environment is similar to or better than that of the conventional least square solution.     

A dynamic search pattern motion estimation algorithm using prioritized motion vectors

Motion estimation is one of the critical parts in video compression standards with a high computational load. Many motion estimation algorithms have been developed to reduce the number of search points compared to a full-search algorithm without losing the quality considerably. Most of them use fixed search patterns in their first step which may suffer from trapping into local minima or searching unnecessary blocks due to inappropriate size and type of search patterns. In this paper, a new dynamic search pattern using motion vectors of spatial and temporal neighboring blocks is proposed. The motion vectors of neighboring blocks are prioritized, in order to efficiently use of halfway stop technique. The simulation results indicate that proposed algorithm is very close to the full-search algorithm in quality, compared to other rivals. Moreover, the average number of searches is often less than other algorithms.     

Salient object detection via images frequency domain analyzing

Salient object detection has become an important direction in image processing and computer vision. The traditional center-priori theory believes that salient target should be closer to the central area of the image. However, false detection will often occur when the salient object is closer to the image boundary. So, this paper obtains center coordinates of the salient object by using Harris corner detection algorithm and convex hull. Accordingly, an improved center-priori saliency detection model is obtained by applying the frequency-tuned method. And then, the local saliency is set up by wavelet transforming which has the local characteristic information representation ability in the time domain and frequency domain. In addition, we obtain the global saliency by spectral residual analyzing. Finally, an advanced center-priori saliency model is established. The experimental results show that the model in this paper has better detection effects and higher target detection rates.     

Morphology Associated Positive Correlation between Carrier Mobility and Carrier Density in Highly Doped Donor–Acceptor Conjugated Polymers

Molecular doping in conjugated polymers (CPs) has recently received intensive attention for its potential to achieve high electrical conductivity in organic thermoelectric materials. In particular, it affects not only the carrier density n but also the carrier mobility µ because high degree of molecular doping changes the morphological properties. Herein, the effect of molecular doping in CP thin films on the pathways and mechanisms of charge transport is investigated, which govern the µ-n relationship. Two representative donor–acceptor type CPs with similar µ but different molecular assembly in an undoped state, that is poly[2,5-(2-octyldodecyl)-3,6-diketopyrrolopyrrole-alt-5,5-(2,5-di(thien-2-yl)thieno[3,2-b]thiophene)] (DPPDTT) and indacenodithiophene-co-benzothiadiazole (IDTBT), are prepared. Heavy doping with iron chloride (FeCl₃) induced DPPDTT with highly crystalline edge-on orientation to increase its µ up to 19.6 cm² V⁻¹ s⁻¹, whereas IDTBT with irregular intermolecular stacking showed little change in µ. It is revealed that this different µ-n relationship is highly attributed to the initial molecular ordering of CP films. The charge transport mechanism also becomes significantly different: both coherent and incoherent transports are observed in the doped DPPDTT, whereas incoherent transport is only found in the doped IDTBT. This study suggests guidelines for enhancing charge transport of CPs under doping in terms of structural disorder.     

Indicator Sensor Development and Fuel Cell Degradation Imaging

Although extensive research has been conducted, understanding the exact phenomena occurring during the operation of polymer electrolyte fuel cells (PEFCs) remains difficult. This research attempted to identify new reasons for the reduced performance of PEFC using an imaging technique. To begin with, H⁺ and OH⁻ indicator sensors, which display red, blue, and green values (RGB) using digital microscopes, are developed and attached to each electrode of a membrane electrode assembly to enable quantitative analysis of ion generation. The proposed reaction in the fuel cell can be confirmed, and various reactions occurring in the electrode can be examined using this approach. In particular, H⁺ is generated at the anode and cathode of the anion exchange membrane fuel cell, which is found to be a major cause of performance deterioration.     

The Impacts of an Electronic Marketplace with Multiple Independent Retailers for Smart Grocery Ordering Systems

This study investigates the impacts of an electronic marketplace with multiple independent retailers for a smart grocery ordering system. Apart from replenishing products from suppliers, the system can also purchase/sell products from/to the electronic marketplace through ‘spot shops’. Both static and dynamic pricing models for the electronic marketplace are developed. An extensive numerical experiment is conducted and the results show that under both static and dynamic pricing, (i) the inventory cost of the aggregated supply chain is significantly reduced; (ii) each participant also enjoys significant cost savings from employing the electronic marketplace. Furthermore, the cost savings increase as the lead times from suppliers increase and/or the variability of their demands increases. The participants’ cost savings also increase as more participants employ the electronic marketplace.     

Electromigration in a Sn-3 wt.%Ag-0.5 wt.%Cu-3 wt.%Bi Solder Stripe Between Two Cu Electrodes Under Current Stressing

The electromigration behavior of a Sn-3 wt.%Ag-0.5 wt.%Cu-3 wt.%Bi solder stripe between two Cu electrodes under current stressing at various densities has been investigated for a current stressing time of 72 h and a temperature of 120°C. After current stressing at a density of 1.0 × 10⁴ A/cm², the solder matrix exhibited a slight microstructural change as well as formation of a distributed Cu₆Sn₅ phase near the anode-side solder/Cu interface. Upon increasing the current density to 3.9 × 10⁴ A/cm² and 5.0 × 10⁴ A/cm², a high density of distributed Cu₆Sn₅ phase was formed across the entire solder stripe, resulting in pronounced microstructural change of the solder. Hillocks were also formed near the anode-side interface due to accumulation of a Sn-rich phase, a Bi-rich phase, and a distributed Cu₆Sn₅ phase, while voids were formed in the solder matrix and at the opposite cathode side. The mechanisms of formation of the distributed Cu₆Sn₅ phase and migration of Bi and Sn are discussed.     

A model for calculating channel share of 802.11 access points with overlapping wireless cells

Consider a collection of 802.11 access points. Each serves as the gateway to the Internet for clients in its WiFi cell. These cells have an arbitrary interference pattern, and reception at a client may be corrupted by transmissions nearby. The popularity of WiFi has made such dense deployment increasingly common. As interference can seriously degrade performance, there is much interest in optimizing the configuration of these cells. One factor to consider in optimization is channel share, defined as the useful fraction of channel bandwidth that an access point gets when there is downlink traffic saturation. Interference affects channel share on the sender side through carrier sensing and transmission deferral, and on the receiver side through collisions, which result in exponential backoff and retransmission. There exists a simple, “back-of-the-envelope” (BoE) technique to model the impact of pairwise sender-side interference. This paper tackles the harder task of determining the impact of receiver-side and non-pairwise sender-side interference. It proposes a technique for modeling the channel share of wireless links, and the accuracy is demonstrated with Qualnet simulation.