Hybrid polymer networks of unsaturated polyester–urethane as composite matrices for jute reinforcement

Reactions of unsaturated polyester resin and 4,4′ diphenyl methane diisocyanate were carried out at different NCO/OH ratios in presence of catalysts to form the hybrid polymer networks. Chain extender (1,4 butanediol) added in the hybrid network (NCO/OH ratio: 0.76) was optimized at a level of ～ 3 wt % only of the polyester resin. The curing of these networks was studied by a rigid body pendulum type (RPT) method in terms of reduced damping ratio and increased frequency. Lack of multiple glass transition temperatures, sharp Tan delta peak, and particulate composite type morphology clearly demonstrated the formation of phase mixed domains in the hybrid networks. The storage modulus and loss modulus master curves obtained by dynamic mechanical analysis indicate that hybrid polymer networks retained higher modulus at lower and intermediate frequencies over the polyester resin showing their superior time‐dependent response. Efficacy of these hybrid network resins was examined as matrices in the jute composites and compared with those of polyester resin and unsaturated polyester–polyurethane interpenetrating network matrices. It is found that the hybrid polymer network matrix composites exhibited superior physicomechanical properties under both dry and boiling water age test. Fractographic evidences such as fiber–matrix adhesion, hackle markings, and fiber breakage also supported their superior behavior over other composite matrices. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

SPECTROSCOPIC CHARACTERIZATION OF SOLVENT SOLUBLE FRACTIONS OF PETROLEUM VACUUM RESIDUES

ABSTRACT

NMR and FTIR spectroscopic techniques were used to investigate the effect of different solvent extraction schemes on the composition and chemical nature of species of vacuum residues of two Indian crude oils (namely Jodhpur and Heera) extractable into polar (ethyl acetate) and non-polar (n-pentane and n-heptane) solvents. The obtained soluble fractions were found to consist of mainly simple aliphatic and naphthenic ring structures, while insoluble fractions consisted primarily aromatic compounds. The results were used to draw inferences on the relative utility of different extraction schemes to upgrade vacuum residues as feedstocks for secondary conversion processes in petroleum industry.     

Pressure dependent phase transitions in (Pb,Ca)TiO3: Determination of structure using high pressure synchrotron X-ray and Raman studies

Pressure dependent studies on technologically important ferroelectric material Pb_0.70Ca_0.30TiO₃ show the occurrence of a new hitherto unreported pressure dependent phase transition around 4 GPa. In the pressure range 4–14 GPa, the parent tetragonal (P4mm) phase of Pb_0.70Ca_0.30TiO₃ transforms in to a monoclinic (Cm) phase before attaining its paraelectric cubic (Pm3m) phase around 15 GPa. High pressure Raman studies reveal the presence of a critical pressure above which the ferroelectric phase starts to reappear in the paraelectric phase. This critical pressure is found to be much lower than the critical pressure observed in pure PbTiO₃. Possible reasons for this lowering of the critical pressure are presented.     

Catalytic hydrogenation for improvement of GaAs/Ge solar cell efficiency

Hydrogen passivation on MOCVD grown p-GaAs epilayers on Ge substrate have been studied by plasma and catalytic hydrogenation and the results were compared. The conversion efficiency of the GaAs/Ge solar cells was found to increase by 10% after catalytic hydrogenation at AM1.5. This increase in efficiency is probably due to passivation of surface dangling bonds.     

Characterization and Studies on Hydro Dynamically Stable Operation of an Angular Jet SOG for COIL

Chemical oxygen-iodine Laser (COIL) is one of the fast emerging high power laser source for near Infrared (λ=1.315μm) laser generation. The heart of the system is the singlet oxygen generator (SOG) which is a pumping source for this laser. A Jet type SOG with a novel approach was designed and fabricated. Singlet oxygen was taken out of the SOG at an angle of 40° thus avoiding the carry over of droplets, which is one of the major drawbacks of horizontal system. The preliminary results have been reported in our earlier publication. The present paper discusses the performance of this generator for various operational conditions viz. diluent's gas nitrogen / helium, basic hydrogen peroxide composition, generator pressure and gas velocity. Further, conditions for the stable operation from generator as well as chlorine injection point of view have been identified.     

Cooperative Impulse Radio Ultra-Wideband Communication Using Coherent and Non-Coherent Detectors: A Review

Ultra-wideband (UWB) is a booming technology in the field of wireless communication. This paper presents a brief idea related to the various coherent and non-coherent IR-UWB detectors. Due to the limitation in transmit power spectral density of UWB system, the major challenges faced by UWB system includes, achieving Quality of Service, system performance and coverage area. So, the combination of UWB system with cooperative communication will not only improve the system performance, but also help in expanding coverage area of signals. A brief review of the work done by various researchers in the field of cooperative impulse radio (IR) UWB communication is also presented in this paper. The working principle and performance analysis of the various coherent and non-coherent IR-UWB detectors using cooperative relay strategies are also discussed at large in this paper. The various fixed cooperative relay strategies used for cooperative UWB communication is Amplify and Forward, Decode and Forward and Detect and Forward. From the simulation results it can be inferred that, even though IR-UWB DTR receiver gives a much better BER performance than IR-UWB ED receiver using both cooperative and non-cooperative strategies, yet ED receiver is preferred because of its less complexity and low power consumption. Future prospects in the field of cooperative IR-UWB communication have also been discussed in this paper.     

Structural and electronic properties of lead nanowires: Ab-initio study

Ab-initio self-consistent study has been performed to analyze the stability of lead nanowires in its six stable configurations like linear, zigzag, triangular, ladder, square and dumbbell. In the present study, the lowest energy structures have been analyzed under the revised Perdew-Burke-Ernzerhof (revPBE) parameterization of generalized gradient approximation (GGA) potential. The two-atom zigzag shaped atomic configuration with highest binding energy and lowest total energy has been confirmed as the most stable structure out of the six atomic configurations. The electronic band structure and density of states have been discussed in detail with a remarkable observation in case of three-atom triangular lead nanowire having a very small band gap while other configurations are found to be metallic. Bulk modulus, pressure derivatives and lattice parameters for different lead nanowires have also been computed and discussed.     

Parameter optimization of ferro-sonication pre-treatment process for degradation of bisphenol A and biodegradation from wastewater sludge using response surface model

In this study, the application of response surface model in predicting and optimizing the ferro-sonication pre-treatment for degradation of bisphenol A (BPA), an endocrine disrupter compound from wastewater sludge (WWS) was investigated. The ferro-sonication pre-treatment process was carried out according to central composite design (CCD) with four independent variables such as wastewater sludge solids concentration, pH, ultrasonication time and FeSO(4) concentration. The effect of ferro-sonication pre-treatment was assessed in terms of increase in sludge solids (suspended solids (SS) and volatile solids (VS)) and organic matter (chemical oxygen demand (COD) and soluble organic carbon (SOC)) solubilization and simultaneous BPA degradation from WWS. It was observed that among all the variables studied, ultrasonication time had more significantly affected the efficiency of the ferro-sonication pre-treatment process followed by FeSO(4) and solids concentration. Through this optimization process, it was found that maximum BPA degradation of 88% could be obtained with 163 min ultrasonication time, 2.71 mg/L FeSO(4) concentration, pH 2.81 with 22 g/L SS. Further, the effect of ferro-sonication pre-treatment on biodegradation of WWS was also studied. It was observed that ultrasonication time had significant effect and the higher biodegradation (32.48%) was observed at 180 min ultrasonication time.