Gold nanoparticles induce cytotoxicity in the alveolar type-II cell lines A549 and NCIH441

Background  

During the last years engineered nanoparticles (NPs) have been extensively used in different technologies and consequently many questions have arisen about the risk and the impact on human health following exposure to nanoparticles. Nevertheless, at present knowledge about the cytotoxicity induced by NPs is still largely incomplete. In this context, we have investigated the cytotoxicity induced by gold nanoparticles (AuNPs), which differed in size and purification grade (presence or absence of sodium citrate residues on the particle surface) in vitro, in the human alveolar type-II (ATII)-like cell lines A549 and NCIH441.     

Decoding two-dimensional complex multicomponent separations by autocovariance function

A new method for decoding two-dimensional (2D) multicomponent separations based on the use of the 2D Autocovariance function (2D-ACVF) has been developed. Theoretical models of single component (SC) spot distributions in 2D separations, both random and structured, are developed as the basis for a nonlinear estimation of both sample and separation system parameters from experimental 2D separations. The number of SCs, the average spot size, the spot capacity, and the saturation factor can be evaluated in the case of random SC spot patterns. The procedure was validated by extensive numerical simulation under conditions close to those usually found in GC x GC or 2D-polyacrylamid gel electrophoresis of proteins. The worse precision degree was no greater than 10% in the case of maximum spot density. This imprecision was fully accounted for, and it seems acceptable owing to the intrinsic statistical character of the estimation method. Structured multicomponent 2D separations, where SCs are linked by linear relationships, give rise to specific structured patterns in 2D-ACVF plots from which the parameters (phase and frequency) of the structured SC sequences can be evaluated: the study of 2D-ACVF makes it possible to decode multicomponent 2D separation, that is, to determine the number, relative abundance, and structural similarities of the single components. Pertinent expressions of the theoretical 2D-ACVF were derived for simple cases, and a procedure for decoding cases of structured 2D separations was developed and applied. It was shown that 2D separations containing both random and structured patterns of SC spots give rise to 2D-EACVF, which is the superimposition of the two component parts. This feature allows one, in principle, to decode the two components. The relevance of these results for Giddings sample dimensionality and separation dimensionality and their effective experimental evaluation is discussed.     

Poly(vinyl alcohol) as versatile biomaterial for potential biomedical applications

In this paper, we present some new case examples where the chemical versatility of poly (vinyl alcohol) (PVA) can be used for potential biomedical applications. PVA, the polymeric material used for designing new nanostructured devices, is water soluble, biocompatible and has excellent physical properties. We point out the possibility of obtaining wall-to-wall chemical hydrogels as well as microgels without diminishing the biocompatibility available in the starting PVA material. Injectability is another important factor to take into account in controlled drug delivery for gene therapy. In this respect, in this paper, established and more innovative methods are prospected in order to obtain particles with dimensions suitable for these applications.     

How you move reveals who you are: understanding human behavior by analyzing trajectory data

The widespread use of mobile devices is producing a huge amount of trajectory data, making the discovery of movement patterns possible, which are crucial for understanding human behavior. Significant advances have been made with regard to knowledge discovery, but the process now needs to be extended bearing in mind the emerging field of behavior informatics. This paper describes the formalization of a semantic-enriched KDD process for supporting meaningful pattern interpretations of human behavior. Our approach is based on the integration of inductive reasoning (movement pattern discovery) and deductive reasoning (human behavior inference). We describe the implemented Athena system, which supports such a process, along with the experimental results on two different application domains related to traffic and recreation management.     

Neural network systems to reproduce crash behavior of structural components

The use of neural networks as global approximation tool in crashworthiness problems is here investigated. Neural networks are not only asked to return some meaningful indices of the structural behavior but also to reproduce load-time curves during crash phenomena. To contain the number of examples required for the training process, parallel subsystems of small neural networks are designed. Design points for the training process are obtained by explicit finite element analyses performed by PAMCRASH. The settlement of the points in the design domain is defined using a maximum distance concept. The procedure is applied to different typical absorption structures made of aluminum alloy: riveted tubes, honeycomb structures, longitudinal keel beam and intersection elements of helicopter subfloors.     

Dye‐Doped Polyhedral Oligomeric Silsesquioxane (POSS)‐Modified Polymeric Matrices for Highly Efficient and Photostable Solid‐State Lasers

Here, the design, synthesis, and characterization of laser nanomaterials based on dye‐doped methyl methacrylate (MMA) crosslinked with octa(propyl‐methacrylate) polyhedral oligomeric silsesquioxane (8MMAPOSS) is reported in relation to their composition and structure. The influence of the silicon content on the laser action of the dye pyrromethene 567 (PM567) is analyzed in a systematic way by increasing the weight proportion of POSS from 1 to 50%. The influence of the inorganic network structure is studied by replacing the 8MMAPOSS comonomer by both the monofunctionalized heptaisobutyl‐methacryl‐POSS (1MMAPOSS), which defines the nanostructured linear network with the POSS cages appearing as pendant groups of the polymeric chains, and also by a new 8‐hydrogenated POSS incorporated as additive to the polymeric matrices. The new materials exhibit enhanced thermal, optical, and mechanical properties with respect to the pure organic polymers. The organization of the molecular units in these nanomaterials is studied through a structural analysis by solid‐state NMR. The domain size of the dispersed phase assures a homogeneous distribution of POSS into the polymer, thus, a continuous phase corresponding to the organic matrix incorporates these nanometer‐sized POSS crosslinkers at a molecular level, in agreement with the transparency of the samples. The silicon–oxygen core framework has to be covalently bonded into the polymer backbone instead of being a simple additive and both the silica content and crosslinked degree exhibit a critical influence on the laser action.     

Designing and Rightsizing the Information System Architecture

Information system design and sizing constitute a complex, top-down process that tailors the technology architecture to application requirements. Practitioners usually tackle this top-down process by focusing on individual design aspects, such as data or specific applications, and by relying on their previous experiences to compare alternative architectural solutions. Acquisition costs are usually accounted for, but related operating and maintenance costs are often neglected or underestimated. The complexity of optimizing individual design problems leads researchers to avoid a global optimization perspective and, thus, the IS architecture is usually a result of the juxtaposition of multiple local optima.This paper takes an overall perspective on the cost minimization problem of information system design to achieve a better trade-off between cost and performance over the whole expected life of the technology architecture. A comprehensive design methodology is discussed as an integrating framework that accounts for all categories of costs, including design, implementation, maintenance, and operation, to achieve a globally cost-minimizing solution.     

PCBs and selected organochlorine compounds in Italian mountain air: the influence of altitude and forest ecosystem type

Passive air samplers (polyurethane foam disks) were deployed on an altitudinal transect in the rural Italian Alps to investigate the potential influence of forest cover on air concentrations. Samplers were exposed overtwo periods, each of several weeks, either in clearings or in forests. In the first period, there was high leaf coverage (high leaf area index, LAI); in the second, the LAI was low after the autumnal leaf fall. PCBs sequestered in the PUF generally declined with altitude, for example, in the clearings PCBs-28, 52, 90/101, 118, and 138, all showed statistically significant declines (p < 0.05). The mass of HCB sequestered increased with altitude, evidence of cold condensation. Ratios of the forest:clearing concentrations were calculated; this ratio expresses the filtering ability of forests to deplete air concentrations compared to the adjacent clearings. During the high LAI sampling period, these depletion factors ranged between 0.93 and 0.54 and were inversely correlated with temperature-corrected log K0A. This relationship was notobserved during the low LAI sampling period. The depletion factors were normalized using the LAI to give a density independent depletion factor (DIDF). The slopes of the correlations with K0A were comparable for broadleaf or coniferous forests at different altitudes, suggesting that leaf surfaces determine the exchanges with air. Broadleaf forests at 1000 and 1400 m showed similar behavior, while a conifer forest at 1800 m gave depletion factors which were higher by about a factor of 2. It is suggested that DIDF can be used in regional environmental fate models to estimate the contribution of forests to contaminant fate.     

Easy Preparation of Liposome@PDA Microspheres for Fast and Highly Efficient Removal of Methylene Blue from Water

Mussel-inspired chemistry was usefully exploited here with the aim of developing a high-efficiency, environmentally friendly material for water remediation. A micro-structured material based on polydopamine (PDA) was obtained by using liposomes as templating agents and was used for the first time as an adsorbent material for the removal of methylene blue (MB) dye from aqueous solutions. Phospholipid liposomes were made by extrusion and coated with PDA by self-polymerization of dopamine under simple and mild conditions. The obtained Liposome@PDA microspheres were characterized by DLS and Zeta potential analysis, TEM microscopy, and FTIR spectroscopy. The effects of pH, temperature, MB concentration, amount of Liposome@PDA, and contact time on the adsorption process were investigated. Results showed that the highest adsorption capacity was obtained in weakly alkaline conditions (pH = 8.0) and that it could reach up to 395.4 mg g⁻¹ at 298 K. In addition, adsorption kinetics showed that the adsorption behavior fits a pseudo-second-order kinetic model well. The equilibrium adsorption data, instead, were well described by Langmuir isotherm. Thermodynamic analysis demonstrated that the adsorption process was endothermic and spontaneous (ΔG⁰ = −12.55 kJ mol⁻¹, ΔH⁰ = 13.37 kJ mol⁻¹) in the investigated experimental conditions. Finally, the applicability of Liposome@PDA microspheres to model wastewater and the excellent reusability after regeneration by removing MB were demonstrated.