Quantum-confined field-effect light emitters: device physics andexperiments

Extended experimental results on three-terminal quantum-confined field-effect light emitters with current injection and field control of luminescent characteristics in the quantum-well structure are reported. By incorporating superlattice buffer layers (SLBLs), the quantum efficiency of the device is dramatically improved and equivalently nonradiative recombination processes are sufficiently suppressed at room temperature. The red-shift of the emission spectra by the quantum-confined Stark effect assures that the electric field is effectively applied to the quantum well. The experimental data on the transient responses of emission intensity to input voltage pulses show fairly good correspondences with theoretical prediction and previous photoluminescence experiments. The authors discuss the ultimate capability of high-speed switching and point that an optical pulse with a duration as short as 30 ps and involving more than 100 photons can be generated by scaling down the size of the device with 1% external efficiency     

Preparation of one-dimensional photonic crystals by sol-gel process for magneto-optical materials

One-dimensional photonic crystal (PC) of periodically alternating low (SiO₂) and high (TiO₂) refractive index materials was prepared by sol-gel dip coating method that controls the thickness of each layer with nanometer level. The photonic band gap of high reflectivity was verified at wavelengths between 590 nm and 820 nm, which became significant with increasing the number of bilayer. The UV-vis spectra, SEM image and glow discharge optical emission spectroscopy indicate the periodic structure of SiO₂/TiO₂ multilayer. The magnetic layer of CoFe₂O₄ was also prepared by a sol-gel dip coating method. After the annealing at 700 °C, the single phase of CoFe₂O₄ film with spinel structure, without any preferred crystalline orientation, was obtained. In addition, the one-dimensional magnetophotonic crystal (MPC), in which the magnetic defect layer of CoFe₂O₄ is introduced into the periodic structure, was prepared. The light was localized at the magnetic defect due to the interference of the multilayer film, and the localized transmittance was observed around 530 nm. The Faraday rotation of MPC shows a peak at ∼ 570 nm which is close to the localized peak of transmittance. This may correspond to the enhancement of Faraday rotation due to the localization of light.     

Strain required in proof test for high-strength fiber splices

The failure properties of high-strength fiber splices following proof tests are studied experimentally and theoretically. It is clarified that splice strength can be improved by conducting proof tests and that the strength distribution and the time-to-failure after a proof test can be predicted theoretically. Taking into account the applicability of these results for submarine optical-fiber cables, it is necessary to conduct a proof-test ofsigma_{p} = 2.5-percent strain on fiber-splicing points.     

Evaluation of additive effects and homogeneity of the starting mixture on the nuclei-growth processes of barium titanate via a solid state route

In an attempt to obtain finest possible microparticles of BaTiO₃ (BT) with highest possible tetragonality via a solid state route, starting mixtures comprising BaCO₃ and TiO₂ were subjected to various pretreatments including addition of glycine and mechanical activation. Reaction processes were monitored by the changes in the weight, crystallinity, and morphology in detail. While mechanical activation with glycine significantly increased the rate of reaction and homogeneity of the particle size of the product, BT, simultaneous particle growth of BT was intolerably acute for micro-electronic devices. The fast particle coarsening was predominated by the coalescence of BT tiny particles formed around titania. A mixture with higher homogeneity was attained by using finer starting materials under wet mixing, avoiding significant mechanical stressing. Particle growth of BT was suppressed to ca. 100 nm to obtain fully crystallized BT particles without significant loss of tetragonality and, hence, close to meet our requirements for MLCCs.     

Force feedback control of robot manipulator by the accelerationtracing orientation method

The authors propose a novel approach to force and compliance control of multi-degree-of-freedom (DOF) robot manipulators. The acceleration tracing orientation method (ATOM) is applied to both controllers. The control law is described in the Cartesian space; however, the final command is the acceleration in the joint space. The interactive terms in each joint disturb and deteriorate the joint motion. The disturbance observer cancels out the total sum of these terms and enables each joint to trace the acceleration command. As a result, a robust control is possible in the force task. The testing of the proposed system in a three-DOF robot manipulator is discussed     

Spectrally efficient digital broadcast systems operated in a phasenoise environment

High spectral efficiency combined with power efficiency, is a requirement for high speed digital broadcast satellite systems. The effect of the recovered carrier phase noise and the nonlinearity on the performance of 16-QAM (quadrature amplitude modulation) and staggered 16-QAM is investigated and compared. It is found that for the phase noise, 16-QAM is more degraded for a roll-off factor of less than 0.4. For roll-off factor of more than 0.8, staggered 16-QAM has superior performance. For the nonlinearity staggered 16-QAM is more sensitive for a roll-off factor of less than 0.4. It is concluded that coincident 16-QAM is suitable for spectrally efficient digital broadcast systems     

Two‐phase flow behavior in microtube reactors during biodiesel production from waste cooking oil

Flow patterns in the course of transesterification of waste cooking oil (WCO), sunflower oil (SFO) with water and/or oleic acid as a model of WCO, and pure SFO in the presence of a KOH catalyst in microtubes were investigated. FAME yield for the transesterification of WCO reached more than 89% in the microtube reactors with a residence time of 252 s at 333 K. The flow patterns when using WCO were changed from a liquid–liquid slug flow at the inlet region to a parallel flow at the middle region, and then to a homogeneous liquid flow at the outlet region as the reaction proceeded at 333 K. Fine droplets containing glycerol and methanol generally formed in oil slugs when using pure SFO, but were almost unobservable when using WCO. The soap produced from free fatty acids was considered to be the main factor affecting the flow patterns of WCO and SFO. © 2009 American Institute of Chemical Engineers AIChE J, 2010