Altered responding to cholecystokinins and dopaminergic agonists following 6-hydroxydopamine treatment in rats.

In 5 experiments with 265 male Wistar albino rats, production of lesions in the brain dopamine (DA) system by intraventricular injection of 6-hydroxydopamine (6-OHDA) resulted in increased responses to subcutaneous apomorphine (0.5 mg/kg) and reduced responses to methamphetamine (0.15 mg/kg). It also made Ss increase responding to intracerebroventricular (icv) cholecystokinin octapeptide (CCK-8; 0.5–2 μg) and reduce responding to cholecystokinin tetrapeptide (CCK-4; 0.5–2 μg). Response changes were quantified by measuring the level of general activity. Results indicate that DA dysfunction not only affected DA receptor sensitivity but also the sensitivity of the CCK system. The response to CCK-8 was partially blocked by a selective CCK-8 antagonist, proglumide (5 μg, icv), a result suggesting the involvement of the CCK-8 receptor system. Results indicate that manipulation of 1 neuronal system could induce sensitivity changes in another closely related system. (32 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effectiveness of estradiol in preventing and reversing obesity induced by ovariectomy and high-caloric diet in female rats.

Four experiments with 77 female Holtzman rats examined the effects of estradiol benzoate (EB) on food intake, body weight (BW), ano-nasal length, and BW/body length ratio in ovariectomized (OVX) and intact Ss maintained on control or high-fat diets and of OVX and intact Ss that had been reduced by deprivation. EB was highly effective in preventing the increase in food intake, BW, and ano-nasal growth after OVX; it was relatively ineffective in reversing BW gain after OVX. However, when ano-nasal length was also considered, BW was effective in returning OVX Ss to an appropriate BW for their increased ano-nasal length. Intact Ss fed a high-caloric diet did not exhibit an increased rate of ano-nasal growth, which indicates that the skeletal growth that occurred after OVX was not simply a result of increased food intake. It is concluded that EB modulates food intake and BW by multiple mechanisms, one of which is by modulating skeletal growth. The nature of the effect of EB on BW of intact Ss suggests that this effect occurs by still another mechanism. (13 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Fibrin-Based Drug Delivery Systems. II. The Preparation and Characterization of Microbeads

An emulsion method was employed to prepare fibrin beads having different sizes in this study. The oil phase of emulsion system was consisted of mineral oil with various amount of oleic acid as surfactant. Fibrin was converted from fibrinogen with thrombin in Tris buffer solution, then the mixture was emulsified into the oil phase forming droplets. After curing for one hour, 400 ul of glutaraldehyde solution (0.5% v/v) was added to minimize coagulation. The recovery of fibrin beads was simply done by decanting the oil phase and washing the residual with diethyl ether once and then with a mixture of isopropanol and n-hexane (1:3) containing 0.2% w/v Tween 80 twice. As expected, increasing the amount of oleic acid in the oil phase decreased the size of fibrin beads. It is due to the decrease of interfacial tension with increasing oleic acid amount. The presence of macromolecules showed no interference on the formation of fibrin beads except lysozyme. The diffusion characteristics of fibrin beads was evaluated using macromolecules of different molecular weight as model. The size of fibrin beads affected the penetration rate, whereas the effect of molecular weight of macromolecules was inconclusive. An exponential equation was able to approximate the penetration of macromolecules into fibrin beads during the late-time period. The possibility of using fibrin beads as the carrier to deliver protein drugs was appreciated.     

An Open-Loop Computer-Based Drug Infusion System

This study reports the development of a computer-based infusion system and methodology to produce and maintain selected plasma concentrations. The method identifies pharmacokinetic infusion parameters for subjects from bolus injection response data, employs these values in control equations implemented by a portable microcomputer and computer-controlled infusion pump, and achieves and maintains selected stepwise drug levels by intravenous drug infusion. Infusion studies with four dogs and five humans resulted in correlation coefficients of 0.98 for the dogs and 0.94 for the humans, with rms errors in maintaining the drug concentration at the desired level of 13.4 and 19.3 percent, respectively. An analysis of error demonstrated that: 1) the control error was less than the value of the pharmacokinetic parameter estimation error in determining a single parameter value, 2) errors in several parameters can have cancelling or additive effects depending on their sign, and 3) an error in the sum of two of the model parameters (A and B) directly translates to equivalent time-independent error in the controlled level.     

The rolling texture of iron of different purities

Deformation texture of 90% cold rolled iron of various purities was studied by pole figure measurements from which complete orientation distribution functions ODF were calculated using series expansion including the zero range method. The texture type consists of two mutually perpendicular orientation tubes which can be idealized as ( 110 )//RD and ( 111 )//ND in accordance with microstructural investigations which revealed two types of microstructures corresponding to these idealized fibres. The intensity superposition of the two fibres yields a maximum density in slightly deviating positions especially in the vicinity of the intersection of the two tubes which may be idealized as ( 110 ) 30° ND fibre component. The texture of the high-purity iron is nearest to the ( 111 )//ND fibre. Within this general texture type, two subtypes can be distinguished corresponding to high-purity iron on the one hand and the low-purity materials on the other. The texture of the high-purity iron at 90% of deformation still corresponds to the low-degree type of the lower-purity materials which is attributed to the occurrence of dynamic recovery in the high-purity iron.     

An Efficient Value Predictor Dynamically Using Loop and Locality Properties

Value prediction, a technique to break data dependency, is important in enhancing instruction-level parallelism and processor performance. A new value predictor utilizing both the loop and locality properties of data values has been proposed in this paper to pursue desirable prediction accuracy at reasonable cost. The proposed value predictor, called the Dynamic Loop and Locality-based (DLL) predictor, makes predictions by dynamically practicing the loop or locality-based prediction policy according to the state. With certain simple designs, the DLL predictor gains prediction accuracy in an efficient way. To secure more comprehensive experimental evaluation of value predictors, a new performance measure, accuracy improvement per cost, briefed as the A/C ratio, is introduced in the paper. Simulation results show that, compared with other existing value predictors, the proposed DLL predictor produces better A/C ratios in almost all situations due to flexible application of different prediction policies and reduced cost.     

A note on total ordering multicast using propagation trees

Jia (1995) proposed a multicast scheme, using propagation trees, to ensure the total ordering (including causal ordering) delivery of messages for group communication. Our study indicates that causal relation between some messages may not actually be presented in this protocol. We then present a revised approach for closed group communication     

Surface-Mediated Interconnections of Nanoparticles in Cellulosic Fibrous Materials toward 3D Sensors

Fibrous materials serve as an intriguing class of 3D materials to meet the growing demands for flexible, foldable, biocompatible, biodegradable, disposable, inexpensive, and wearable sensors and the rising desires for higher sensitivity, greater miniaturization, lower cost, and better wearability. The use of such materials for the creation of a fibrous sensor substrate that interfaces with a sensing film in 3D with the transducing electronics is however difficult by conventional photolithographic methods. Here, a highly effective pathway featuring surface-mediated interconnection (SMI) of metal nanoclusters (NCs) and nanoparticles (NPs) in fibrous materials at ambient conditions is demonstrated for fabricating fibrous sensor substrates or platforms. Bimodally distributed gold–copper alloy NCs and NPs are used as a model system to demonstrate the semiconductive-to-metallic conductivity transition, quantized capacitive charging, and anisotropic conductivity characteristics. Upon coupling SMI of NCs/NPs as electrically conductive microelectrodes and surface-mediated assembly (SMA) of the NCs/NPs as chemically sensitive interfaces, the resulting fibrous chemiresistors function as sensitive and selective sensors for gaseous and vaporous analytes. This new SMI–SMA strategy has significant implications for manufacturing high-performance fibrous platforms to meet the growing demands of the advanced multifunctional sensors and biosensors.     

Biocompatibility of Amine‐Functionalized Silica Nanoparticles: The Role of Surface Coverage

Here, amorphous silica nanoparticles (NPs), one of the most abundant nanomaterials, are used as an example to illustrate the utmost importance of surface coverage by functional groups which critically determines biocompatibility. Silica NPs are functionalized with increasing amounts of amino groups, and the number of surface exposed groups is quantified and characterized by detailed NMR and fluorescamine binding studies. Subsequent biocompatibility studies in the absence of serum demonstrate that, irrespective of surface modification, both plain and amine‐modified silica NPs trigger cell death in RAW 264.7 macrophages. The in vitro results can be confirmed in vivo and are predictive for the inflammatory potential in murine lungs. In the presence of serum proteins, on the other hand, a replacement of only 10% of surface‐active silanol groups by amines is sufficient to suppress cytotoxicity, emphasizing the relevance of exposure conditions. Mechanistic investigations identify a key role of lysosomal injury for cytotoxicity only in the presence, but not in the absence, of serum proteins. In conclusion, this work shows the critical need to rigorously characterize the surface coverage of NPs by their constituent functional groups, as well as the impact of serum, to reliably establish quantitative nanostructure activity relationships and develop safe nanomaterials.     

Synthesis of Large‐Area InSe Monolayers by Chemical Vapor Deposition

Recently, 2D materials of indium selenide (InSe) layers have attracted much attention from the scientific community due to their high mobility transport and fascinating physical properties. To date, reports on the synthesis of high‐quality and scalable InSe atomic films are limited. Here, a synthesis of InSe atomic layers by vapor phase selenization of In₂O₃ in a chemical vapor deposition (CVD) system, resulting in large‐area monolayer flakes or thin films, is reported. The atomic films are continuous and uniform over a large area of 1 × 1 cm², comprising of primarily InSe monolayers. Spectroscopic and microscopic measurements reveal the highly crystalline nature of the synthesized InSe monolayers. The ion‐gel‐gated field‐effect transistors based on CVD InSe monolayers exhibit n‐type channel behaviors, where the field effect electron mobility values can be up to ≈30 cm² V^?1 s^?1 along with an on/off current ratio, of >10⁴ at room temperature. In addition, the graphene can serve as a protection layer to prevent the oxidation between InSe and the ambient environment. Meanwhile, the synthesized InSe films can be transferred to arbitrary substrates, enabling the possibility of reassembly of various 2D materials into vertically stacked heterostructures, prompting research efforts to probe its characteristics and applications.