Real Space Imaging of the Electronic States in Underdoped Ca2−x Na x CuO2Cl2 Single Crystals

Scanning tunneling microscopy (STM) has been performed on underdoped Ca_2–x Na _x CuO₂Cl₂ (Na-CCOC) single crystals to investigate the electronic states of doped Mott insulators near the metal-insulator transition. STM images taken at 7 K show patch-like or river-like irregular features superposed on the atomic corrugations. The irregular structure has a characteristic length scale of 20 Å, which is unchanged in different samples and at different doping levels studied (0.08<x<0.12). Bias voltage dependence of the STM image suggests that Na-CCOC consists of two distinct phases with different electronic states.     

Characterisation of optically driven microstructures for manipulating single DNA molecules under a fluorescence microscope

Optical tweezers are powerful tools for manipulating single DNA molecules using fluorescence microscopy, particularly in nanotechnology‐based DNA analysis. We previously proposed a manipulation technique using microstructures driven by optical tweezers that allows the handling of single giant DNA molecules of millimetre length that cannot be manipulated by conventional techniques. To further develop this technique, the authors characterised the microstructures quantitatively from the view point of fabrication and efficiency of DNA manipulation under a fluorescence microscope. The success rate and precision of the fabrications were evaluated. The results indicate that the microstructures are obtained in an aqueous solution with a precision ∼50 nm at concentrations in the order of 10⁶ particles/ml. The visibility of these microstructures under a fluorescence microscope was also characterised, along with the elucidation of the fabrication parameters needed to fine tune visibility. Manipulating yeast chromosomal DNA molecules with the microstructures illustrated the relationship between the efficiency of manipulation and the geometrical shape of the microstructure. This report provides the guidelines for designing microstructures used in single DNA molecule analysis based on on‐site DNA manipulation, and is expected to broaden the applications of this technique in the future.Inspec keywords: DNA, molecular biophysics, fluorescence, optical microscopy, radiation pressure, biological techniquesOther keywords: optically driven microstructures, single DNA molecule analysis, fluorescence microscopy, optical tweezers, nanotechnology‐based DNA analysis, manipulation technique, aqueous solution, fine tune visibility, yeast chromosomal DNA molecules, geometrical shape, on‐site DNA manipulation     

Interfacial microstructure and strength of steel/aluminum alloy joints welded by resistance spot welding with cover plate

We joined aluminum alloy A5052 to cold-rolled steel SPCC (Steel Plate Cold Commercial) and austenitic stainless steel SUS304 using resistance spot welding with a cover plate. The interfacial microstructure was observed using transmission electron microscopy. A thick two-layered reaction layer contains Fe₂Al₅ and FeAl₃ and a thin serration reaction layer contains Fe₂Al₅ and FeAl₃ were observed at the A5052/SPCC and A5052/SUS304 interface, respectively. Mechanical property analysis suggested that the reaction layer has no effect on the tensile shear strength of the A5052/SUS304 joint and that the tensile shear strength of the A5052/SPCC joint is influenced by the reaction layer formed at its interface.     

Towards a local learning (innovation) model of solar photovoltaic deployment

It is by now familiar that in the deployment of solar photovoltaic (PV) systems, the cost dynamics of major system component like solar cell/module is subjected to experience curve effects driven by production learning and research and development at the supplier side. What is less clear, however, is the economics of system integration or system deployment that takes place locally close to the user, involving other market players, in the downstream solar PV value chain. Experts have agreed that suppliers of solar PV system must customize their flexible characteristics to address local unique users’ and applications requirements and compete on price/performance basis. A lack of understanding of the drivers of the economics of system customization therefore is a deficiency in our understanding of the overall economics of this renewable energy technology option.     

Advanced energy saving in the reaction section of the hydro-desulfurization process with self-heat recuperation technology

The reaction section of the naphtha hydro-desulfurization (HDS) process is a heating and cooling thermal process consisting of a feed/effluent heat exchanger and a fired heater. Energy savings are fundamentally made as a result of the maximized heat recovery in the heat exchanger and the reduced heat duty of the fired heater. To achieve further energy saving in the process, “self-heat recuperation technology” (SHRT) was adopted. In this technology, a compressor was introduced. The suction side of the compressor needed a lower pressure and the feed stream evaporated much easily. The discharged side of the compressor satisfied the operating conditions of both pressure and temperature at the inlet of the reactor. And the reactor effluent stream was able to be used completely to preheat and vaporize the feed stream. All the heat in the process stream was re-circulated without using a fired heater. SHRT was applied to the naphtha HDS process of 18,000 barrel per stream day (BPSD) in the refinery and the mass and energy balance of the process was calculated using commercially available simulation software, Invensys PROII version 8.1. This process-simulation case study confirmed that despite there being no more energy saving potential in the conventional process that makes use of a fired heater, the advanced process with SHRT can reduce the energy consumption significantly by using the recuperated heat of the feed stream.     

An innovative modularity of heat circulation for fractional distillation

A novel modularity of heat circulation for distillation process, which reduces the energy consumption, is proposed. By incorporating compressors and heat exchangers, the heat of the distillate is recuperated and exchanged with the heat of the feed streams. The proposed technology achieves the reduction in the required energy more than 75% as compared with a benchmark process which uses external heat source for heating. This shows the proposed modularity of heat circulation for distillation process is very promising technology to drastically reduce energy demand for distillation.     

Analysis of human error in nursing care

Analysis of reports about incidental and accidental events in nursing care were made using a reliability engineering method. Unnatural working hours, such as evening duty, night duty falling next to a holiday, two consecutive night-duty shifts, and two consecutive evening-duty shifts were major factors in the occurrence of errors. In a mixed-division ward (a ward containing patients belonging to different divisions), rule-based errors happened more frequently than in a single-division ward. Also, less experienced nursing staffs made errors more frequently than experienced nursing staffs.     

The effect of a secreted form of beta-amyloid-precursor protein on intracellular Ca2+ increase in rat cultured hippocampal neurones

1. The effects of secreted forms of beta-amyloid-precursor proteins (APP(S)s) on the intracellular Ca2+ concentration ([Ca2+]i) were investigated in rat cultured hippocampal neurones. APP695S, a secretory form of APP695, attenuated the increase in [Ca2+]i evoked by glutamate. In addition, APP695S itself evoked an increase in [Ca2+]i in 1 or 2 day-cultured hippocampal cells, but not in 7 to 13 day-cultured cells. 2. Eighty-one percent of neurones which were immunocytochemically positive for microtubule-associated protein 2 responded to APP695S with an increase in [Ca2+]i. 3. APP695S induced a transient rise in [Ca2+]i even in the absence of extracellular Ca2+ and produced an elevation in inositol-1,4,5-trisphosphate (IP3) in a concentration-dependent manner from 100 to 500 ng ml(-1). In the presence of extracellular Ca2+, APP695S caused a transient rise in [Ca2+]i followed by a sustained phase at high [Ca2+]i, suggesting Ca2+ entry from the extracellular space. 4. The [Ca2+]i elevation was mimicked by amino terminal peptides of APPs, but not by carboxy terminal peptides. 5. These results taken together suggest that APP695S induces an increase in [Ca2+]i in hippocampal neurones through an IP3-dependent mechanism that changes according to the stage of development.     

Effects of short duration morning bright light in healthy elderly. II: sleep and motor activity

Subjective sleep feelings and motor activity were measured in seven healthy elderly subjects for 6 days. The subjects were exposed to bright light (6000 lux) for 30 min in the morning or instructed to sit in front of a desktop lighting device without light. The average level of motor activity during the night was significantly decreased in the bright light condition, compared with the controlled condition. However, daytime motor activity did not show significant differences between the two conditions. From these findings, even a short duration of morning bright light is effective in maintaining sleep without changing daytime activity.     

LES analysis of flow and turbulent mixing in an unsteady jet

The flow and mixing process of unsteady jets are fundamentally analyzed by large eddy simulations. The effects of nozzle velocity and turbulence intensity on the turbulent eddy structure and mixing process between the nozzle fluid and ambient fluid were investigated. The results show that a toroidal‐shaped vortex, which emerges around the jet tip, primarily accelerates the entraining flow. Also, increasing the turbulence intensity in the nozzle encourages mixing in the jet without changing the jet‐contour. Furthermore, when the rise‐up time of the initial nozzle velocity is elongated, turbulent mixing is suppressed. © 2007 Wiley Periodicals, Inc. Heat Trans Asian Res, 36(5): 303–313, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20158