Transient phenomena of current and field distortion due to dynamics of packet‐like charges in LDPE films

Simultaneous measurements of space charge and external current were carried out using a PEA measurement system with an electrometer on the back of a grounding electrode in order to clarify the physical situation of a huge packet of positive space charges in LDPE films. A large number of positive charges from a semiconducting anode were accumulated at the interface between LDPE and an Al‐cathode at a mean applied field of 1.5 MV/cm and then finally disappeared. The results of simultaneous measurements showed that the external current kept a relatively high value during charge accumulation and further increased when the charges disappeared. Both the charge dynamics and the external current were restricted by addition of a low‐molecular‐weight paraffin wax, indicating that carrier transport was influenced by the microstructure of the polymer. The dynamics of the residual charges after short‐circuiting is also discussed. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 179(4): 10–17, 2012; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21256     

Three-Stage Method for Selecting Informative Genes for Cancer Classification

Gene expression data produced by microarray machines are useful for cancer classification. However, the process of gene selection for the classification faces a major problem because of the properties of the data such as the small number of samples compared with the huge number of genes (high-dimensional data), irrelevant genes, and noisy data. Hence, this paper proposes a three-stage method to select a small subset of informative genes which is most relevant for the cancer classification. It has three stages: (i) pre-selecting genes using a filter method to produce a subset of genes; (ii) optimizing the gene subset using a multi-objective hybrid method to yield near-optimal subsets of genes; (iii) analyzing the frequency of appearance of each gene in the different near-optimal gene subsets to produce a small (final) subset of informative genes. Five gene expression data sets are used to test the effectiveness of the proposed method. Experimental results show that the performance of the proposed method is superior to other experimental methods and related previous works. A list of informative genes in the final gene subset is also presented for biological usage. Copyright © 2009 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Changes in hepatic key enzymes of dairy calves in early weaning production systems

The objective of the present study was to describe plasma hormonal and metabolite profile and mRNA expression levels and activities of the enzymes pyruvate carboxylase (PC), phosphoenolpyruvate carboxykinase (PEPCK), and acetyl-coenzyme A (CoA) carboxylase in the liver of male Holstein calves before (1 and 3 wk of age) and after (8, 13, and 19 wk of age) weaning at 6 wk of age. The mean plasma concentration of acetate and β-hydroxybutyrate increased, and that of plasma lactate and nonesterified fatty acids decreased with week, particularly after weaning. Plasma glucose concentration was lowest at 8 wk of age. The mean plasma concentration of insulin and glucagon did not change with time, and that of cortisol was greatest at 1 wk of age. In the liver, enzyme activity of PC was greatest at 1 wk of age and decreased with time. There was a significant relationship between the activity and the mRNA level for PC. Activity of PEPCK also decreased with week. Acetyl-CoA carboxylase activity tended to decrease with week, and activity at 13 wk of age was lower than that at other times. Expression of PC mRNA, but not that of PEPCK and acetyl-CoA carboxylase α, decreased with week. We conclude that the hepatic gluconeogenic enzymes and acetyl-CoA carboxylase activities tend to decrease with age, reflecting changes in plasma metabolites in early weaning production systems.     

Using Turmeric Oil as a Solvent Improves the Distribution of Sesamin-Sesamolin in the Serum and Brain of Mice

Accumulation of amyloid-β peptide is associated with Alzheimer's dementia. Previously, we reported that sesamin and sesamolin inhibited β-secretase activity in vitro, and each was transported to the serum and brain in mice after oral administration. However, the bioavailability of sesamin and sesamolin was poor in mice. In this study, we aimed to improve the bioavailability of sesamin and sesamolin. We found that the levels of sesamin and sesamolin in mouse serum and brain were higher after the administration of a mixture of sesame extract and turmeric oil (MST) than those after administering sesame extract alone. Serum sesamin and sesamolin contents in the MST-treated group were 23-fold and 15-fold higher, respectively, than those in the sesame extract-treated group. Brain sesamin and sesamolin contents in the MST-treated group were 14-fold and 11-fold higher, respectively, than those in the sesame extract-treated group. These results suggest that turmeric oil is an effective solvent to enhance the bioavailability of sesamin and sesamolin.     

Abscopal Effect of Frozen Autograft Reconstruction Combined with an Immune Checkpoint Inhibitor Analyzed Using a Metastatic Bone Tumor Model

We evaluated the abscopal effect of re-implantation of liquid nitrogen-treated tumor-bearing bone grafts and the synergistic effect of anti-PD-1 (programmed death-1) therapy using a bone metastasis model, created by injecting MMT-060562 cells into the bilateral tibiae of 6–8-week-old female C3H mice. After 2 weeks, the lateral tumors were treated by excision, cryotreatment using liquid nitrogen, excision with anti-PD-1 treatment, and cryotreatment with anti-PD-1 treatment. Anti-mouse PD-1 4H2 was injected on days 1, 6, 12, and 18 post-treatment. The mice were euthanized after 3 weeks; the abscopal effect was evaluated by focusing on growth inhibition of the abscopal tumor. The re-implantation of frozen autografts significantly inhibited the growth of the remaining abscopal tumors. However, a more potent abscopal effect was observed in the anti-PD-1 antibody group. The number of CD8+ T cells infiltrating the abscopal tumor and tumor-specific interferon-γ (IFN-γ)-producing spleen cells increased in the liquid nitrogen-treated group compared with those in the excision group, with no significant difference. The number was significantly higher in the anti-PD-1 antibody-treated group than in the non-treated group. Overall, re-implantation of tumor-bearing frozen autograft has an abscopal effect on abscopal tumor growth, although re-implantation of liquid nitrogen-treated bone grafts did not induce a strong T-cell response or tumor-suppressive effect.     

Fabrication and piezoelectric properties of BaTiO3/BaTiO3-Bi(Mg1/2Ti1/2)O3-BiFeO3 composites

We fabricated xBaTiO₃ (BT)/(1-x)[BaTiO₃-Bi(Mg_1/2Ti_1/2)O₃-BiFeO₃] (BT-BMT-BF)?+?0.1?wt%MnCO₃ composites by spark plasma sintering and investigated the effect of BT content x, BT powder size, and BT-BMT-BF composition on piezoelectric properties. For xBT/(1-x)(0.3BT-0.1BMT-0.6BF) +?0.1?wt%MnCO₃ (x?=?0–0.75) composites with a 0.5-µm BT powder, the dielectric constant was increased with x, and the relative density was decreased at x?=?0.67 and 0.75, creating optimum BT content of x?=?0.50 with a piezoelectric constant d₃₃ of 107?pC/N. When a larger 1.5-µm BT powder was utilized for the composite with x?=?0.50, the d₃₃ value increased to 150?pC/N due to the grain size effect of the BT grains. To compensate for a compositional change from the optimum 0.3BT-0.1BMT-0.6BF due to partial diffusion between the BT and 0.3BT-0.1BMT-0.6BF grains, a 0.5BT/0.5(0.275BT-0.1BMT-0.625BF)?+?0.1?wt%MnCO₃ composite with the 1.5-µm BT powder was fabricated. We obtained an increased d₃₃ value of 166?pC/N. These results provided a useful composite design to enhance the piezoelectric properties.     

Fabrication of lead-free piezoelectric (Bi<Subscript>0.5</Subscript>Na<Subscript>0.5</Subscript>)TiO<Subscript>3</Subscript>–BaTiO<Subscript>3</Subscript> ceramics using electrophoretic deposition

Electrophoretic deposition (EPD) process has certain advantages such as it can be applied for a mass production and also can be combined with magnetic crystal alignment technique. In this work, we prepared lead-free 85(Bi_0.5Na_0.5)TiO₃–15BaTiO₃ (85BNT–15BT) piezoelectric ceramics by conventional uniaxial pressing and EPD process. Various conditions were optimized such as suspension media, applied electrical field, and deposition time in order to yield dense green ceramics of 85BNT–15BT composition using EPD process. 85BNT–15BT ceramics prepared using EPD process revealed the Curie temperature of about 250 °C, coercive field of about 30 kV/cm, and piezoelectric constant (d ₃₃) of 75 pC/N. The EPD-processed samples exhibited structural and electrical properties similar to that of the conventionally processed one suggesting the successful fabrication of 85BNT–15BT piezoelectric ceramics by EPD method without composition deviation. This study lays a foundation on the fabrication of Bi-based lead-free piezoelectric ceramics by an alternative route other than the conventionally practiced solid-state reaction method maintaining the similar chemical composition, moreover, leaving a large space to explore more in the future.     

Adsorption characteristics of superplasticizers on cement component minerals

Adsorption characteristics of various superplasticizers on portland cement component minerals were investigated. Adsorption isotherms of various types of superplasticizers and ζ-potentials of cement component minerals at the maximum adsorption of the superplasticizers were measured. The value of the adsorption isotherm was calculated from the amount of the superplasticizer adsorbed on a cement component mineral in an equilibrated solution. The maximum amounts of adsorption and the adsorption isotherms varied with types of component mineral and superplasticizer. For all types of superplasticizers, a larger amount of superplasticizer was adsorbed on C₃A and C₄AF than C₃S and C₂S. However, the equilibrated concentration of each superplasticizer at the maximum adsorption was not influenced by types of superplasticizer. Without superplasticizer, C₃S and C₂S had negative ζ-potential. On the contrary, C₃A and C₄AF had positive ζ-potential. Therefore, accelerated coagulation of cement particles might occur due to their electrostatic potentials that are opposite each other. However, all component minerals of cement had negative ζ-potential when they were mixed with any superplasticizer. Fluidity of fresh cement paste is improved due to electrostatic repulsion acting between particles.