A Generalized Technique for Register Counting and its Application to Cost-Optimal DSP Architecture Synthesis

In this paper we propose a generalized technique to count the required number of registers in a schedule which supports overlapped scheduling and can be applied to the case where a general digit-serial data format is used. This technique is integrated into an integer linear programming (ILP) model for time-constrained scheduling. In the ILP model, appropriate processors of certain data formats are chosen from a library of processors and data format converters are automatically inserted between processors of different data formats if necessary. Then the required number of registers for each data format is evaluated correctly by the proposed technique. Hence an optimal architecture for a given digital signal processing algorithm is synthesized where the cost of registers as well as the cost of processors and data format converters are minimized. It is shown that by including the cost of registers in the synthesis task as proposed in this paper leads to up to 12.8% savings in the total cost of the synthesized architecture when compared with synthesis performed without including the register cost in the total cost.     

Studies on sublimation of disperse dye out of dyed polymers. I. Rate of sublimation and amorphous transition points of poly(ethylene terephthalate)

Four samples of poly(ethylene terephthalate) film of various crystallinities and orientation were dyed with p-nitroaniline and disperse dyes. When these films were heated under a 2–3 × 10^?3 mm Hg vacuum at a specified temperature T, the dye sublimed out of the dyed specimen. The amount (M_t/M_∞) of sublimed dye is in linear proportion to the square root of the sublimation time, t^½, where M_t and M_∞ are the amounts of dye sublimed for times t and t = ∞. The diffusion coefficient D, calculated from the slope of the above plot, is independent of the dye concentration of the film. When log D is plotted against 1/T°K over the temperature range 320–520°K, the relation is composed of two to four intersecting lines with the slope decreasing with elevation of temperature and with the breaks at about 89°–98°, 122°–135°, 155° and 175°–176°C. These breaks are the amorphous transitions: the first is the glass transition temperature T_g, the second and the fourth are the amorphous transitions corresponding to the crystalline transition points, i.e., the cold crystallization temperature and the smectic–triclinic transition temperature. With some exceptions, these amorphous transitions are found also by dilatometry and electrical conductivity measurements. The apparent activation energy for diffusion decreases from about 100 kcal/mole for the glass state to 22–24 kcal/mole for the region above 180°C. The activation energy for each region changes slightly with the size of dye molecule and the crystallinity and orientation of the film.     

The effects of oxygen diffusion on the surface photooxidation of polystyrene

This paper further illustrates the applicability of multiple internal reflectance infrared spectroscopy to the analysis of near-surface photooxidation. The results are compared with transmission infrared spectra to evaluate compositional gradients resulting from photooxidation and the influence of oxygen diffusion. The sample was a solvent-cast film of atactic, narrow distribution polystyrene, M_w of 100,000, that had been drawn to a ratio of 3.0 at 110°C by solid state coextrusion. Irradiation of these thin films, ～25μm thickness, was performed on exposure to air at 35°C for periods of up to 6 h using a mercury source emitting at 254 nm. On photooxidation, a board peak appears at 3200–3500 cm^?1, attributable to hydroperoxide formation. The most dramatic increase in the infrared spectra is found for a carbonyl band at 1730 cm^?1. It appears to result from an aromatic acid group since it is shifted to 1660 cm^?1 on immersion of the oxidized polystyrene films in aqueous ammonium hydroxide. It is confirmed that the photooxidation of polystyrene occurs preferentially at the surface and that this reaction rate is greatly reduced in the drawn polystyrene film.     

Poly(p-tert-butoxycarbonyloxystyrene): a convenient precursor to p-hydroxystyrene resins

An efficient synthetic route to pure, high molecular weight poly(p-hydroxystyrene) is reported. The route involves synthesis of a new monomer, p-tert-butoxycarbonyloxystyrene, polymerization by radical initiation or by cationic initiation in liquid SO₂, followed by thermolysis or acidolysis of the tert-butoxycarbonyl protecting group. Porous, crosslinked resin beads containing the nucleophilic, phenol pendant group have been prepared in a similar fashion from the precursor terpolymer of p-tert-butoxycarbonyloxystyrene, styrene and divinylbenzene. The utility of this resin for solid-phase synthesis has been demonstrated.     

Change of the amorphous state by heat treatment below the glass transition temperature

This study was undertaken to elucidate the state of a polymer in the amorphous state through a change of motion of the molecular chain caused by heat treatment below the glass transition temperature. From dielectric measurements of amorphous poly(ethylene terephthalate) heat-treated below T_g, it was found that the average relaxation time, the distribution of relaxation time and the dielectric strength increase with increase of heat treatment. From these results, it was concluded that the amorphous state becomes more random by heat treatment.     

Compressibility of the polymer crystal

Results for the compressibilities of a wide range of polymer crystals along the fibre- and the transverse crystal axes are presented. Good agreement is found between the theoretical and the experimental results of different authors.     

Development of a flexible autonomous robot without sensors or controllers

Recently, various robots with many degrees of freedom, such as rescue robots and domestic robots, have been developed and used in practical applications. It is difficult to control such robots autonomously in real environments, because in order to control the many degrees of freedom, we have to observe many states, calculate huge amounts of information, and operate many actuators. In this study, we consider a flexible robot without sensors or controllers that can determine the inclination of a slope and climb up the slope. In order to demonstrate the effectiveness of the proposed framework, we have developed a prototype robot and conducted experiments. The result indicates that the robot could determine the inclination and climb up a gentle slope autonomously. Thus, we have realized an autonomous robot that has no explicit sensors or controllers.     

Modified Bagolini striated glass test: clinical applications of starlight test in binocular visual field screening

AIM: To introduce the "starlight" test which was devised to check binocular vision in normal conditions of seeing in a rapid, easy, and cost effective manner and to estimate the possibility of its clinical use in screening the binocular visual field of patients. METHOD: The Bagolini striated glass test consists of optically plano lenses with imperceptible parallel scratches that barely blur the environment but produce two perpendicular luminous stripes (right eye stripe of 45 degrees and left eye stripe of 135 degrees) when subjects with normal binocular vision view one light source. Unlike the original Bagolini test, the starlight test uses three light sources in horizontal or vertical lines according to the testing purposes and the subject is asked to fixate upon the centre light. Through Bagolini glasses, the subject observes the resulting grid-like pattern and the state of binocular visual field of the subject can be roughly estimated. RESULTS: Normal subjects and patients with strabismus, visual field loss from intracranial diseases, glaucoma, retinitis pigmentosa, and functional visual loss were examined using the starlight test and findings from each case were discussed. CONCLUSIONS: The starlight test, which was made by hand at a low cost, is a simple test that can be used clinically. It provides information about the state of binocular vision of patients in normal conditions of seeing. It is also useful because it enables the examiner to share similar experiences with the examinee. The results suggest it can be effective in visual field screening.