Charge reduction and regeneration in K+, Na+, Mg2+, Ni2+ and Co2+-exchanged Wyoming Bentonite

Controlled calcination of ion-exchanged Wyoming Bentonite in the presence and absence of ammonia leads to layer charge reductions. Detailed chemical analyses of both unexchangeable and exchangeable species lead to the conclusion that in no case is there migration of the original interlamellar cations into the octahedral region of the layers although, in terms of ionic radius alone, Mg²⁺, Ni²⁺ and, possibly Co²⁺, might be expected to do so. The production of unexchangeable Mg, Ni or Co, is identified as resulting from high temperature hydrolysis leading to hydroxide or oxide formation.     

Mold-filling studies for the injection molding of thermoplastic materials. Part II: The transient flow of plastic materials in the cavities of injection-molding dies

A practically-oriented computer model which computes the temperature, pressure, and velocity fields in a cavity during the mold filling portion of the injection molding process is described. The model is structured so that it can be used for cavities having non-simple shapes and for commonly used molding compounds with complicated viscosity, shear rate, temperature relationships. Predictions from the model are found to be in good agreement with results obtained from exact solutions to special cases. Model predictions in molding problems have been found to correctly describe trends such as an increase in the pressure required to fill molds as injection rate, shot temperature, and mold temperature decrease, and to be reasonably accurate when compared to data for plaque, disc, and telephone housing molds over a wide range of molding conditions. Some illustrative examples of the use of the model in solving real molding problems are provided.     

Constructing and applying higher order textons: Estimating breast cancer risk

Texture analysis based on textons is extended by introducing a method for computing textons of arbitrary order. First-, second- and third-order textons are applied to classify screening mammograms as to indicate a low or high risk of breast cancer. First-order textons are found to provide better estimates of breast cancer risk than other orders on their own but the combination of first- and second-order textons outperforms first-order textons alone and other combinations of two orders. Combining all three orders of textons does not improve classification. This example indicates that including higher-order textons has the potential to improve classification performance.     

The toughness of copolymers of polypropylene

A series of fracture mechanics tests of a set of random and impact copolymers of polypropylene, in which the ethylene content was varied, is described. The plane strain toughness is found to change from the homopolymer value, but thereafter to be independent of ethylene content. The yield stress of the impact copolymers decreases markedly with ethylene content, while that for random copolymers increases only slightly. This is reflected in toughness values in tension. A comparison with the behavior of other rubber-modified materials is made and it is concluded that crazing is an important mechanism in polypropylene and is perhaps more rate and temperature sensitive than in acrylonitrile-butadiene-styrene (ABS).     

Nucleation and growth of anodic oxide films on bismuth—I. Cyclic voltammetry

The early stages in the formation of a continuous anodic layer of bismuth oxide on a solid bismuth electrode, in the pH range 5–14, were studied. The oxide covered the surface by the simultaneous thickening and spreading of patches. The metal surface was classified into two different areas with different overvoltage for oxide nucleation. The ratio of the two areas varied according to the history of the surface.The thickening of the newly formed layer (final thickness ～20 nm) followed the high-field growth law i = $\text{A}$exp(B$\text{E}$) where $\text{E}$ is the field in the oxide layer, with B = (2.0 ± 0.5) × 10^?6 V^?1 cm. This value of B gives an activation distance for high-field ion transport of 0.2 nm, comparable to the radius of a lattice site and much smaller than that obtained previously, for much thicker films.Dissolution of the film, giving breakdown of the oxide layer and pitting of the metal, occurred for pH<8. The thickness of the anodic film was thus limited to only 4 nm at pH 5.Cathodic reduction of the anodic oxide resulted in a porous metal surface. The current—voltage curve for the reduction often had a complex shape, which was related to the morphology of the original anodic layer.     

Chemical nature of a supercritical-gas extract of coal at 350 °C

A novel supercritical-gas (toluene) extract, comprising 17.0% of a low-rank coal, was separated by a combination of solvent fractionation and both silica-gel and gel-permeation chromatography. The average structure of the soluble fractions, together amounting to 85% of the extract, was investigated by a variety of spectroscopic methods, including high-resolution ¹H nuclear magnetic resonance, proton-decoupled pulse Fourier transform ¹³C magnetic resonance, infrared and low-ionizing-voltage mass spectrometry. Analyses were also made by gas chromatography. The results for the low-oxygen fractions are consistent with a generally open-chain polynuclear aromatic average structure with about 33% of the available sites carrying alkyl substituents. The most common of these is methyl, but there are also substantial numbers of longer-chain alkyls, some branched, and naphthenic groups. The fractions rich in oxygen also have similar structure but for the presence of phenolic hydroxyl groups, and, as is demonstrated for the first time by ¹³C n.m.r., ether oxygen links. Aliphatic constituents are mainly straight-chain alkanes with some branched-chain and isoprenoid hydrocarbons. These conclusions are discussed in terms of the thermal history of the extract and are compared with other contemporary views on the low-molecular-weight constituents of coal.     

The Coolest Way to Generate Binary Strings

Pick a binary string of length n and remove its first bit b. Now insert b after the first remaining 10, or insert $\overline{b}$ at the end if there is no remaining 10. Do it again. And again. Keep going! Eventually, you will cycle through all 2 ⁿ of the binary strings of length n. For example, are the binary strings of length n=4, where and . And if you only want strings with weight (number of 1s) between ? and u? Just insert b instead of $\overline{b}$ when the result would have too many 1s or too few 1s. For example, are the strings with n=4, ?=0 and u=2. This generalizes ‘cool-lex’ order by Ruskey and Williams (The coolest way to generate combinations, Discrete Mathematics) and we present two applications of our ‘cooler’ order. First, we give a loopless algorithm for generating binary strings with any weight range in which successive strings have Levenshtein distance two. Second, we construct de Bruijn sequences for (i) ?=0 and any u (maximum specified weight), (ii) any ? and u=n (minimum specified weight), and (iii) odd u?? (even size weight range). For example, all binary strings with n=6, ?=1, and u=4 appear once (cyclically) in . We also investigate the recursive structure of our order and show that it shares certain sublist properties with lexicographic order.     

Feeding pure docosahexaenoate or arachidonate decreases plasma triacylglycerol secretion in rats

Essential fatty acid (EFA)-deficient rats were fed highly purified methyl esters of docosahexaenoate (22∶6n−3), arachidonate (20∶4n−6), alpha-linolenate (18∶3n−3) or oleate (18∶1n−9) (100 mg/day, tube fed for 3–10 days), and their plasma triacylglycerol (TG) secretion rates were measured. Secretion rates of TG into plasma were reduced by tube-feeding 22∶6n−3, 20∶4n−6, 18∶3n−3, but not 18∶1n−9, to EFA-deficient rats. A significant reduction occurred after feeding 22∶6n−3 for only three days. Feeding 22∶6n−3 or 18∶3n−3 to EFA-deficient rats for three days also reduced the activities of liver lipogenic enzymes and sharply increased the proportions of 22∶6n−3 and 20∶5n−3 in liver phospholipid fractions. Mechanisms by which these EFA may reduce lipogenesis are discussed.     

Use of surface modified recycled rubber particles for toughening of epoxy polymers

The objective of this research is to investigate the feasibility of using surface treated recycled rubber particles for toughening of epoxy polymers. These particles are obtained through grinding of scrap tires followed by oxidizing the surface of the particles in a reactive gas atmosphere. Surface treated recycled rubber particles with a nominal particle size of approximately 75 μm and a commonly used reactive liquid elastomer, CTBN, have been incorporated in a DGEBA epoxy resin. It has been shown that the recycled rubber particles are not as effective as CTBN in toughening of the epoxy matrix. However, blending of the two modifiers results in a synergistic toughening. Microscopy reveals that, when used alone, recycled rubber particles simply act as large stress concentrators and modestly contribute to toughening via crack deflection and microcracking. In the presence of micron size CTBN particles, which cavitate and induce massive shear yielding in the matrix, however, the recycled particles “stretch” the plastic deformation to distances far from the crack tip. This mechanism causes plastic zone branching and provides an unexpectedly high fracture toughness value. This study, therefore, provides a practical approach for manufacturing engineering polymer blends utilizing the surface modified recycled rubber particles.     

Axial pressure profiles in non-newtonian flow: Part I: Theoretical and experimental considerations

The flow behavior of polymeric fluids in tubes can be determined from measurements of the radial stress profile in the flow direction. This subject, the focus of our research, will be examined in Part II of this communication. Part I describes a research designed to test the accuracy of stress measurement with pressure transducers in a variety of recess mount geometries. No mount geometry errors were detected for the fluids used in this work over a shear rate range of 1 to 2000 sec^?1. Part I also contains a survey of the literature and theoretical considerations pertinent to the entire work.