Tape Cast Multilayer Composite of Nano Zirconia with High Toughness

During the last decade, worldwide attention of researchers has focused on nano-ceramic composites with superior mechanical behavior and improved reliability for structural applications. Here we report the development of a multi-layer composite (MLC) of tape cast nano zirconia with high failure energy. The MLC samples were fabricated by thermocompression of green tapes prepared from 3 mole % yttria stabilized zirconia (3-YSZ) powder with a primary crystallite size of 27 nm. Depending on the number of layers, the MLC samples exhibited failure energy (238.97 KJm^-3) more than two times higher than that of the single tape (≈107 KJm^-3) with a reasonably high bi-axial flexural strength (≈630 MPa), high hardness (≈ 13 GPa at 49 N), and indentation fracture toughness nearly four times as high as that of the single tape. In addition, these MLC materials showed the presence of a R-curve behavior.     

Application of response surface method for predicting electroless nickel plating

Electroless nickel plating process has been studied considering pure copper (99.99%) as a substrate material. Deposition per unit area has been considered as a response variable and individual as well as combined effects of process parameters on deposited mass have been studied. Regression analysis and Student’s t test have been used to identify the significant influencing process parameters. It has been observed that reducing agent (NaBH₄), source of metal (NiCl₂ · 6H₂O) and temperature significantly affect the deposition. The interactions among various process parameters have also been observed to be significant. Mathematical modeling has been carried out by a second-order response surface model with central composite design (CCD) to take into account the effect of curvature in the predicted response. Equations for response surfaces have been determined for various deposition times using MATLAB software package. Most of the response surfaces show that deposition thickness increases with increased values of process parameters within the adopted range but with different rates. The test for reliability for predicting response surface equations shows that these equations give an excellent fitting to the observed values.     

Social conflicts and their remedies in the distribution of canal water: Case study of the Damodar valley irrigation project,India

Lower availability of water in canals has caused damage of control structures, breach of minors and sub‐minors and erection of cross bunds to obtain water for crops. This misappropriation has resulted in inter‐ and intra‐village conflicts in the area of the Damodar Valley Irrigation Project in West Bengal. The conflicts are mostly caste based, as is prevalent in Northern India, and subject to political involvement. In the head reach the conflicts over the distribution of water are solved by the intervention of village‐level institutions with the help of community development blocks and irrigation officials. But in the tail reach the village‐level institutions and government officials have played a very limited role in resolving the conflicts. This article examines the nature and causes of the conflicts and some solutions are suggested.     

Optimisation of different physical parameters for bioleaching of phosphate by Aspergillus niger from Indian rock phosphate

A mutant strain of Aspergillus niger AB100 was incubated with samples of rock phosphate. Mutation resulted in a greater amount of solubilisation (30 to 35%) as against the parent strain (10 to 15%). The influence of leaching parameters such as ore concentration (pulp density), particle size, initial pH of the medium, temperature, volume of the medium in 250 ml flasks, inoculum concentration and age of inoculum was studied. When low quantity of rock phosphate is applied (0.1%) the solubilisation of phosphorus was optimal (40.5%). Optimum particle size was--200 to 240 mesh, initial pH of the medium 4.0, optimum volume of the fermentation medium 160 ml, time period of incubation was 8 days, inoculum volume was 7.5 ml, and age of inoculum 7 days. The maximum leaching of phosphorus by using these optimum physical parameters is 45 to 50%.     

Neutron diffraction structural study of 1201 superconductor (Hg0.7Cr0.3)Sr2CuOδ

Rietveld analysis of powder neutron diffraction pattern recorded on Sr-based 1201-phase superconductor (T _c =53 K), (Hg_0.7Cr_0.3)Sr₂CuO_4+δ shows that the oxygen atoms at O(3) site are disordered atx=y=0.3712. This fourfold split site has a total combined occupancy of ～80% and is the only occupied site in the (Hg, Cr)O plane.     

The island posterior calf fasciocutaneous flap: an alternative to the gastrocnemius muscle for cover of knee and tibial defects

By repeatedly presenting an alien scent to territory-owning beavers, Castor canadensis, we tested two competing hypotheses about the function of scent marking: scent fence and scent matching. The scent-fence hypothesis predicts that territory owners should respond increasingly strongly over time towards a recurrent alien scent because of the ineffectiveness of previous responses. The scent-matching hypothesis predicts that the intensity of response should be the same or decrease because, without the presence of the intruding signaller coupled with the chemical signal, the presence of the scent itself does not advertise the ownership of a territory. The response level of resident beaver families was stable to strangers' anal gland secretions (AGSs) and decreased to strangers' castoreum during a period of 6 days. These results support the scent-matching hypothesis but not the scent-fence hypothesis. Copyright 1998 The Association for the Study of Animal Behaviour. Copyright 1998 The Association for the Study of Animal Behaviour.     

Structure and mechanism of action and inhibition of steroid dehydrogenase enzymes involved in hypertension

Members of the NADPH-dependent short chain dehydrogenase/reductase (SDR) family control blood pressure, fertility, and natural and neoplastic growth. Despite the fact that only one amino acid residue is strictly conserved in the 100 known members of the family, all appear to have a dinucleotide-binding Rossmann fold and homologous catalytic residues including the conserved tyrosine. Variation in the binding pocket creates specificity for steroids, prostaglandins, sugars and alcohols. The critically important tyrosine appears to maintain a fixed position relative to the scaffolding of the Rossmann fold and the cofactor position, while the substrate-binding pocket alters in such a way that the dehydrogenation/reduction reaction site is brought into bonding distance of the tyrosine hydroxyl group. Licorice induces high blood pressure by inhibiting an SDR in the kidney. The crystal structure of the complex of 3alpha,20beta-hydroxysteroid dehydrogenase and carbenoxolone reveals the mechanism of enzyme inhibition by licorice. The most potent dehydrogenase enzyme inhibitors are those that displace substrate and cofactor and form strong hydrogen bonds to one or more amino acid residues involved in catalysis.     

Influences of material parameters and microstructure on superplastic forming

The strain rate sensitivity of flow stress has long been recognized as an important factor in determining superplastic ductility, and its relationship to high tensile elongations is well understood from the mechanics point of view. However, the measurements of this parameter and other properties of superplastic materials are challenging, and quite varied results are observed from different test procedures used. In this paper a discussion of the various characterization methods is presented, and the relationship between the superplastic characteristics and the microstructure is brought forth. The applicability of the uniaxial superplastic properties on the biaxial deformation behavior as in the superplastic forming process is addressed, including a relationship of such properties to the selection of forming parameters. This paper is based on a presentation made at the symposium “On the Mechanical, Microstructural and Fracture Processes in Superplasticity” held at the annual meeting of the AIME in Pittsburgh, PA on October 7, 1980 under the sponsorship of the Flow and Fracture Activity of the Materials Science Division of ASM.